MANIFOLD AS 6T7580 - Caterpillar

Walk-Around Inspection
For your own safety and maximum service life of the machine, make a thorough walk-around inspection before mounting the machine to start the engine.Look around and under the machine for such items as loose bolts, trash build-up, oil or coolant leaks, broken or worn parts. Inspect the condition of the implements and the hydraulic components. 1. Inspect the implements for damage or excessive wear. Repair if damaged.2. Inspect implement cylinders and linkage for damage or excessive wear. Repair if damaged.3. Inspect and replace lights, broken bulbs and lenses. 4. Remove trash build-up in and around the engine and under the floorplate. Also remove any dirt build-up on top of the crankcase guard.5. Inspect and repair any cooling system leaks. Check the hoses, radiator fins, radiator cap and the drain area.6. Inspect the engine precleaner screen for dirt build-up. Remove any dirt or debris. 7. Inspect and repair any engine compartment leaks. Check around all seals and covers.8. Inspect steps and handholds for condition and cleanliness. Repair or clean if necessary. Inspect the Rollover Protective Structure (ROPS) for damage. See your Caterpillar dealer for repairs if necessary. 9. Inspect and repair any hydraulic system leaks. Inspect hoses, seals and around flanges.10. Inspect and repair any final drive leaks. 11. Be sure covers and guards are firmly in place. Inspect for damage or for loose and missing bolts.12. Inspect and repair any transmission leaks. Check around the seals and covers. Also, check the hoses around the transmission.13. Inspect and repair damaged and excessively worn tracks. Tighten any loose bolts and replace any that are missing. 14. Inspect operator's compartment for cleanliness and remove all trash and dirt build-up.15. Inspect and repair the instrument panel when broken gauges and lights are found. 16. Inspect the seat belt and mounting for excessive wear and damage. Replace if damaged. 17. Make sure the horn, back-up alarm, lights, guards, shield, etc., are in proper working order. 18. Clutch and brake pedals can be adjusted closer or farther from operator's seat for comfort.Contact your Caterpillar dealer for proper adjustment.Contact your Caterpillar dealer for service or replacement instructions.Pre-Start Checks
1. Maintain the engine oil level between the ADD and the FULL mark on the dipstick. 2. Open the right side access door. 3. Maintain the power train system oil level between the ADD and the FULL mark on the dipstick. Close the door. 4. Maintain the hydraulic implement oil level between the ADD and the FULL mark in the sight guage. 5. Remove the coolant fill cap.6. Maintain the engine coolant above the low level plate. 7. Remove the fuel fill cap.8. Maintain the fuel level to the FULL mark on the dipstick. 9. Open the fuel drain valve. Drain moisture and sediment, as required, from the fuel tank. 10. Service the air filter elements when the yellow piston enters the red area in the indicator. 11. Adjust the seat to allow full brake pedal travel with the operator's back against seat back.12. Adjust the mirror