MANIFOLD GP-WATER COOLED EXH 8N0862 - Caterpillar

Check that the lines attached to all the remote grease fittings are undamaged. If the grease lines are split, grease will not reach the components that require lubricating. Machine damage will result.
Park the machine on a level surface. Engage the parking brake. Lower the truck body or the OEM attachment and shut off the engine. Install the steering frame lock. Refer to Operation and Maintenance Manual, "Steering Frame Lock".If regular lubrication is performed at the recommended intervals, only one or two shots of grease will be required at each fitting.Note: The fittings for lubrication of the front suspension cylinders are located on the rear supports for the fenders on the tractor.
Remove the caps and clean all the fittings by wiping before you lubricate the fittings.
Illustration 1 g01134663
Lubricate the left front suspension cylinder bearings through fittings (1).
Illustration 2 g01134665
Lubricate the right front suspension cylinder bearings through fittings (2). Lubricate the spherical bearing on the front suspension a-frame through fitting (3) .Note: The fittings for lubrication of the spherical bearings on the rear suspension a-frames are located at the front of the trailer on the left side.
Illustration 3 g01134666
Lubricate the spherical bearings on the rear suspension a-frames through fittings (4) .
Install the caps onto the fittings.
Remove the steering frame lock. Refer to Operation and Maintenance Manual, "Steering Frame Lock".