MANIFOLD, CARBURETOR AND AIR CLEANER GROUP 9M4847 - Caterpillar

9M4847 MANIFOLD, CARBURETOR AND AIR CLEANER GROUP Caterpillar parts 824B, 834, 988

Price: query
Add in request price Go to cart

Rating:

Alternative (cross code) number:
CA9M4847
9M-4847
9M4847

Caterpillar 9M4847 MANIFOLD, CARBURETOR AND AIR CLEANER GROUP

Weight: 21 pounds 9 kg.

Buy MANIFOLD, CARBURETOR AND AIR CLEANER GROUP 9M4847 Caterpillar genuine, new aftermarket tractor parts with delivery
WHEEL DOZER, WHEEL LOADER,

Compatible equipment models: 9M4847:

WHEEL DOZER 824B 834

WHEEL LOADER 988 Caterpillar

Number on catalog scheme:

Caterpillar 9M4847 Parts scheme MANIFOLD, CARBURETOR AND AIR CLEANER GROUP

For full view, you need register

Information:

Illustration 1. 6V29 Sleeve Metering Fuel System Pump Roll Pin Tool.
Illustration 2. Correct installation of roll pin.
Illustration 3. Installation of roll pin in tool.PROCEDURE TO INSTALL ROLL PINS
The 6V29 Sleeve Metering Fuel System Pump Roll Pin Tool has a drilled hole in one end. Install the roll pin in the tool as shown in Illustration 3.
To give maximum service life to the roll pins, hold the tool so the slots (open side) in the pins will be toward either the top or bottom of the housing when pins are installed.Install the roll pin in the fuel injection pump housing as shown until the tool makes contact with the housing as shown in Illustration 4.
Illustration 4. Installation of roll pin in fuel injection pump housing. Tool makes contact with fuel injection pump housing.
Illustration 5. Installation of tool in fuel injection pump housing.The diameter of the drilled hole in the end of the tool is larger than the diameter of the hole in the fuel injection pump housing. The tool will release the roll pin as the tool is removed from the fuel injection pump housing.
After the roll pin is installed in the fuel injection pump housing, it must be installed to the correct depth. Install the 6V29 Sleeve Metering Fuel System Pump Roll Pin Tool into the correct pump assembly bore as shown in Illustration 5.
Use a small hammer and punch to install the roll pin until it makes contact with the tool as shown in Illustration 6. The roll pin will be at the correct depth. The tool is heat treated and the roll pin will not damage the tool when it makes contact with it.
Illustration 6. Installation of roll pin to the correct depth.The 6V29 Sleeve Metering Fuel System Pump Roll Pin Tool is available for parts service as part of the 5P4203 Sleeve Metering Field Service Tool Group.