9T7440 MANIFOLD Caterpillar parts
D3B, D3G, D4G, D5G
Rating:
Alternative (cross code) number:
CA9T7440
9T-7440
9T7440
CA9T7440
9T-7440
9T7440
Weight: 3 pounds 1 kg.
TRACK-TYPE TRACTOR,
Information:
1. Remove the V-Belt from the drive pulley on alternator (2). See the topic "Remove V-Belt" in this module.2. Put identification marks on all electrical wires and cables connected to alternator (2) for installation purposes. Disconnect the electrical wires and cables from alternator (2).3. Remove bolt (1) and washer. Remove two bolts (3), washers and nuts that hold the alternator to mounting bracket (4). Remove alternator (2). The following steps are for the installation of the alternator.4. Put alternator (2) in position on mounting bracket (4) as shown. Install two bolts (3), washers and nuts. Hand tighten only.5. Loosely install bolt (1) and the washer.6. Install the V-Belt on the alternator drive pulley.7. Adjust the tension of the drive belt. See the Operation & Maintenance Manual for the correct adjusting procedure. Tighten bolt (1).8. After adjusting the tension of the drive belt, tighten two bolts (3).
Caterpillar parts catalog:
Parts manifold Caterpillar catalog:
2263373
MANIFOLD
953C
953C
1773382
MANIFOLD
D5R LGP, D6N, D6N LGP, D6N OEM
D5R LGP, D6N, D6N LGP, D6N OEM
2505790
MANIFOLD AS
D5N, D6N
D5N, D6N
2008498
MANIFOLD
561N, D5N, D6N
561N, D5N, D6N
2191768
MANIFOLD
973C
973C
2342869
MANIFOLD
D6R II, D6R III, D6T
D6R II, D6R III, D6T
1700845
MANIFOLD AS
325C, 325D L, 330C, 330D L, 336D L, 336E HVG, 345C L, 349E L HVG, D3G, D4G, D5G, M325C MH, M325D L MH, M325D MH, M330D
325C, 325D L, 330C, 330D L, 336D L, 336E HVG, 345C L, 349E L HVG, D3G, D4G, D5G, M325C MH, M325D L MH, M325D MH, M330D
2117797
MANIFOLD
561N, PL61
561N, PL61
2152484
MANIFOLD AS
561N
561N
2316125
MANIFOLD-INLET
D3G, D4G, D5G
D3G, D4G, D5G
2316124
MANIFOLD
D3G, D4G, D5G
D3G, D4G, D5G
1993475
MANIFOLD
D3G, D4G, D5G
D3G, D4G, D5G