MANIFOLD AS 9Y8682 - Caterpillar

Illustration 1 g06061065
Table 1
Specification for 434-1934 Lift Cylinder Gp
Item Qty Part Specification Description
1 1 2J-0564 Locknut Before assembly, lubricate thread and face.
Torque to 3400 340 N m (2508 251 lb ft).
A 1 435-7869 Rod As Diameter is 74.950 0.038 mm (2.9508 0.0015 inch).
B 1 435-7867 Lift Cylinder As Bore is 120.00 0.08 mm (4.724 0.003 inch).
C 1 266-9985 Head Bore over four lands is 75.33 0.03 mm (2.966 0.001 inch).
2 Before assembly, lubricate thread with clean grease.
Torque to 600 130 N m (443 96 lb ft).
3 18 8E-5703 Shim Thickness is 0.8 mm (0.03 inch).
4 4 1D-4616 Bolt Torque to 200 40 Nm (148 30 lb ft).
5 1 167-2184 Buffer Seal As Lubricate the sealing lip lightly with the fluid that is being sealed.
6 1 167-2318 U-Cup Seal Lubricate the sealing lip lightly with the fluid that is being sealed.
7 1 233-0621 Wiper Seal Lubricate the sealing lip lightly with the fluid that is being sealed.
8 - - Before assembly, apply Loctite609 to the wiper seal groove.