MAST GP 0913892 - Caterpillar

Illustration 1 g00592423
(1) 119-5325 Sleeve Bearing Outside diameter ... 95 mm (3.7 inch) Inside diameter ... 80 mm (3.1 inch) (2) 119-5324 Sleeve Bearing Outside diameter ... 85 mm (3.3 inch) Inside diameter ... 70 mm (2.8 inch) (3) Torque for fitting ... 9 5 N m (7 4 lb ft) (4) The position that is shown is for the slits in the seal. (5) Torque for 12 bolts ... 367 55 N m (271 41 lb ft) (6) Torque for locknut ... 9460 470 N m (6977 347 lb ft) (7) Torque for setscrew ... 57 10 N m (42 7 lb ft)After tightening the setscrew (7) , stake the setscrew in two places. (8) Rod Diameter of rod ... 90 mm (3.5 inch) Minimum thickness for plating ... 0.03 mm (.001 inch) (9) Bore of head ... 90 mm (3.5 inch) (10) Bore of cylinder ... 130 mm (5.1 inch) (11) In order to remove the air during seal installation fill the clearances with grease.Bucket Cylinder Drift Rate (New Cylinder) Maximum allowable drift in five minutes ... 10 mm (0.3937 inch) Hydraulic oil temperature ... 55° 5°C (131° 9°F) Load on bucket ... No load