3C8740 MAST AS. Caterpillar parts
Rating:
Alternative (cross code) number:
CA3C8740
3C-8740
3C8740
CA3C8740
3C-8740
3C8740
Weight: 0.20 pounds 0 kg.
For full view, you need register
Information:
Removal Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A 1U-7505 Hydraulic Jack 1
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting, and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids.Refer to Special Publication, NENG2500, "Dealer Service Tool Catalog" for tools and supplies suitable to collect and contain fluids on Cat products.Dispose of all fluids according to local regulations and mandates.
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Drain the engine oil into a suitable container for storage or disposal. Refer to Operation and Maintenance Manual, "Engine Oil and Filter - Change".
Illustration 1 g01207187
Use Tooling (A) to support engine oil pan (2). The weight of engine oil pan (2) is approximately 27 kg (59 lb).
Remove bolts (1) and (3).
Remove engine oil pan (2) and the gasket. Installation Procedure
Table 2
Required Tools
Tool Part Number Part Description Qty
A 1U-7505 Hydraulic Jack 1
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Illustration 2 g01207187
Use Tooling (A) to support engine oil pan (2). The weight of engine oil pan (2) is approximately 27 kg (59 lb).
Position the gasket and engine oil pan (2) on the engine. Install bolts (3) and (1).
Fill the engine with engine oil to the correct level. Refer to Operation and Maintenance Manual, "Engine Oil and Filter - Change".
Table 1
Required Tools
Tool Part Number Part Description Qty
A 1U-7505 Hydraulic Jack 1
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting, and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids.Refer to Special Publication, NENG2500, "Dealer Service Tool Catalog" for tools and supplies suitable to collect and contain fluids on Cat products.Dispose of all fluids according to local regulations and mandates.
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Drain the engine oil into a suitable container for storage or disposal. Refer to Operation and Maintenance Manual, "Engine Oil and Filter - Change".
Illustration 1 g01207187
Use Tooling (A) to support engine oil pan (2). The weight of engine oil pan (2) is approximately 27 kg (59 lb).
Remove bolts (1) and (3).
Remove engine oil pan (2) and the gasket. Installation Procedure
Table 2
Required Tools
Tool Part Number Part Description Qty
A 1U-7505 Hydraulic Jack 1
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Illustration 2 g01207187
Use Tooling (A) to support engine oil pan (2). The weight of engine oil pan (2) is approximately 27 kg (59 lb).
Position the gasket and engine oil pan (2) on the engine. Install bolts (3) and (1).
Fill the engine with engine oil to the correct level. Refer to Operation and Maintenance Manual, "Engine Oil and Filter - Change".