MASTER CYLINDER CUP 2V4107 - Caterpillar

Illustration 25 g00669731
Install adjustment shim (33).
Illustration 26 g00669730
Install bearing cone (32) onto shaft assembly.
Illustration 27 g00669729
Install O-ring seal (31).
Illustration 28 g00669727
Install O-ring seal (28) and port plate (29) on head assembly (26).
Illustration 29 g02580532
Install head assembly (26) and bolts (25).
Illustration 30 g00670203
Install spool (23) in compensator valve (1). Install spacer (24) onto plug (22).
Apply Tooling (G) to the threads of plug (22). Install plug (22).
Illustration 31 g02581078
Improper assembly of parts that are spring loaded can cause bodily injury.To prevent possible injury, follow the established assembly procedure and wear protective equipment.
Install O-ring seal (17) to plug (16). Install guide (21), spring (20), spring (19), and plate (18) into compensator valve (1).
Install plug (16) into compensator valve (1).
Illustration 32 g00670198
Install spool (14) in compensator valve (1). Install spacer (15) on plug (13).
Apply Tooling (G) to the threads of plug (13). Install plug (13).
Illustration 33 g02581076
Improper assembly of parts that are spring loaded can cause bodily injury.To prevent possible injury, follow the established assembly procedure and wear protective equipment.
Install O-ring seal (8) to plug (7). Install guide (12), spring (11), spring (10), and plate (9) into compensator valve (1).
Install plug (7) into compensator valve (1).
Illustration 34 g00670191
Install O-ring seal (6) on plug (5).
Illustration 35 g00670190
Install plugs (5) in compensator valve (1).
Illustration 36 g00670188
Inspect O-ring seals (4) and replace the O-ring seals, if necessary. Install O-ring seals (4) on compensator valve (1).
Illustration 37 g00669721
Install bolts (2) and pressure and flow compensator valve (1) to piston pump (3).End By:
Install the piston pump.