MAT-ABSORBENT 2610115 - Caterpillar

Improper lifting and improper tie-downs can allow the load to shift or fail and cause injury or damage. Use only properly rated cables and slings with lift and tie down points provided.Follow the instructions in Operation and Maintenance Manual, "Lifting and Tying Down the Machine" for the proper technique for securing the machine. Refer to Operation and Maintenance Manual, "Specifications" for specific weight information.
Illustration 1 g00275417
The weights that are listed below and the instructions that are listed below describe units that are manufactured by Caterpillar Inc..Approximate Machine Shipping Weight
963C without a bucket 17626 kg (38824 lb)
963C with a bucket 18900 kg (41630 lb)
Use properly rated cables and properly rated slings for lifting. For a machine with a bucket, position the slings beneath the front of the track and beneath the rear of the track. Also for a machine without a bucket, position the slings beneath the front of the track and beneath the rear of the track. For a machine with a ripper, position the slings beneath the front of the track and beneath the rear of the track.
On sharp corners, use corner protectors. The crane should be positioned so that the machine may be lifted in a level plane. The spreader bars should be wide enough to prevent contact with the machine.
Tie-downs
For the front tie-downs, use the eye of the front tie-down.
For the side tie-downs, use the inside edge of the track shoe.
For the rear tie-downs, use the rear boss. Use the outer edge of the track shoe.Check the state laws that govern the following load characteristics.
Weight
Width
Length
HeightCheck the local laws that govern the following load characteristics.
Weight
Width
Length
HeightConsult your Caterpillar dealer for shipping instructions for your machine.