AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

2C8282 POWER BLADE AND TIP CIRCLE GROUP SERIAL NO. 11W1128-UP 2C8422-PAGE 142 120G MOTOR GRADER


IMPLEMENTS
CIRCLE GP
DRAWBAR GP
FRAME AND BODY
AXLE GP

MOTOR GRADER 120G MOTOR GRADER 11W
 120G MOTOR GRADER 11W01019-01250 (MACHINE) POWERED BY 3304 ENGINE MEBP1300 120G 11W   (1975)

IMPLEMENTS

CIRCLE GP
CIRCLE GP
2C-8282 CIRCLE GP
CIRCLE GP
2C-8282 CIRCLE GP
CIRCLE GP
2C-8282 CIRCLE GP
CIRCLE & BEAM AS
2C-8422 CIRCLE & BEAM AS
CIRCLE AND BEAM ASSEMBLY
2C-8281 CIRCLE AND BEAM ASSEMBLY
 

#MEBP13000420
 

2C-8282: CIRCLE GP

2C8282 POWER BLADE AND TIP CIRCLE GROUP
SERIAL NO. 11W1128-UP
2C8422-PAGE 142
c320124 MEBP1300
2C8282 CIRCLE GP Parts scheme
  For full view, you need register

Parts for your 120G MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 0S-1619 [2] BOLT  
  3B-4506 [2] LOCKWASHER  
2. 2C-8422 Y [1] CIRCLE & BEAM AS  
3. 9S-1366 [2] BOLT  
  1H-7855 [2] SPACER (1.38IN.)LG  
  8F-4028 [2] SPACER (.25IN.)LG  
4. 3B-4508 [44] LOCKWASHER  
5. 4B-5273 [6] WASHER  
6. 8D-5862 [1] GUARD AS  
7. 6H-1717 [42] BOLT (1.125IN.)LG  
8. 5D-0134 [4] STRIP-WEAR (END)  
  9D-6638 [1] STRIP-WEAR (CENTER)  
9. [1] BRACKET AS  
  9D-8285 [1] CAP  
10. 8S-9092 [2] BOLT (2.25IN.)LG  
  1A-8537 [2] BOLT (2.75IN.)LG  
  4D-3704 [4] WASHER-HARD  
11. 5D-6644 [10] SHIM .762MM(.029IN)THK  
12. 8D-5863 [1] GUARD AS  
13. 2G-3221 [5] SHIM 1.6MM(.062IN)THK (.060IN.)THK  
14. 1D-0503 [2] WASHER  
  2B-2673 [2] NUT  
  3B-4647 [2] PIN-COTTER  
15. 6G-9427 C [1] BRACKET-RAIL (L.H.)  
  6G-9426 C [1] BRACKET-RAIL (R.H.)  
16. 1D-4641 [2] BOLT  
  6K-3632 [2] LOCKNUT  
  0S-1822 [2] WASHER (.25IN.)THK  
  7D-1446 [2] WASHER (.188IN.)THK  
17. 7F-0482 [4] NUT-FULL  
18. 8D-5949 [1] BAR-SPREADER  
19. 6D-5415 [10] PLATE  
20. 6G-2947 [1] SHAFT  
21. 2K-0419 CB [4] WASHER  
  B   USE AS REQUIRED
  C   CHANGE FROM PREVIOUS TYPE
  Y   SEPARATE ILLUSTRATION
 

#MEBP13000421
 

2C-8422: CIRCLE & BEAM AS

2C8422 CIRCLE AND BEAM ASSEMBLY
SERIAL NO. 11W1071-UP
PART OF 2C8282 POWER BLADE AND TIP CIRCLE
c335110 MEBP1300
2C8422 CIRCLE & BEAM AS Parts scheme
  For full view, you need register

Parts for your 120G MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 9D-2506 C [1] BRACE  
2. 6G-2949 [1] BRACE  
3. 2G-3971 [1] BRACKET AS  
4. 4D-4375 [2] LUG  
5. 9D-2504 C [1] BRACE  
6. 6G-2946 [2] STOP  
7. 8D-3093 [2] SPACER  
  9D-2185 B [2] SHIM 2.54MM(.10IN)THK  
  9D-2186 B [2] SHIM 1.27MM(.05IN)THK  
  B   USE AS REQUIRED
  C   CHANGE FROM PREVIOUS TYPE
 

#MEBP13000422
 

2C-8281: CIRCLE AND BEAM ASSEMBLY

2C8281 CIRCLE AND BEAM ASSEMBLY
SERIAL NO. 11W1019 TO 11W1070 INCLUSIVE
PART OF 2C8282 POWER BLADE AND TIP CIRCLE
c169479 MEBP1300
2C8281 CIRCLE AND BEAM ASSEMBLY Parts scheme
  For full view, you need register

Parts for your 120G MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7B-5037 H [2] LOCK  
2. 6D-4689 H [1] BRACE  
3. 2G-3971 [1] BRACKET ASSEM.  
4. 4D-4375 H [2] LUG  
5. 6D-6547 [2] BEARING  
6. 6D-1886 [2] STOP  
7. 8D-3093 H [2] SPACER  
  9D-2185 H [2] SHIM 2.54 mm(.100 in.) thick  
  9D-2186 H [2] SHIM 1.27 mm(.050 in.) thick  
8. 7B-5036 H [2] SHAFT  
9. 2C-8147 [1] CIRCLE ASSEM.  
    (Includes parts marked H)
 

#MEBP13000423
 

2G-6810: DRAWBAR GP

2G6810 DRAWBAR GROUP
SERIAL NO. 11W1019 TO 11W1032 INCLUSIVE
c237447 MEBP1300
2G6810 DRAWBAR GP Parts scheme
  For full view, you need register

Parts for your 120G MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 4J-8622 [4] BOLT  
  9H-1031 [4] WASHER  
2. 2G-2858 [1] CAP  
3. 7D-5861 [1] ADAPTER  
4. 2B-0947 [6] BOLT  
  2M-0849 [6] WASHER  
5. 2H-3764 C [2] BOLT  
6. 4D-3907 C [4] SHIM .762 mm(.03 in.) thick  
  6D-3133 C [6] SHIM .254 mm(.01 in.) thick  
7. 2G-7464 [3] INSERT  
8. 2G-6802 [1] BALL  
9. 2G-6795 [4] PLATE  
10. 2G-6793 [28] SHIM .762 mm(.03 in.) thick  
  2G-6794 [16] SHIM .254 mm(.01 in.) thick  
11. 1D-4612 [2] BOLT  
12. 5P-6652 [12] WASHER  
13. 1K-6870 [10] NUT  
14. 2G-6703 [4] SHOE  
15. 1D-4614 [10] BOLT  
16. 2S-0115 [10] WASHER  
17. 2G-6809 [1] DRAWBAR AND YOKE ASSEM.  
    (Includes)
18. 8F-9836 [10] LUG  
19. 2G-5849 [1] PLATE ASSEM.  
    (Includes)
  2G-5962 [3] BALLSTUD ASSEM.  
    (Each Includes)
  2G-5689 [1] BALLSTUD  
20. 2G-6800 C [1] SHAFT ASSEM.  
21. 4B-3604 [8] SETSCREW  
  1D-5119 [9] NUT  
  C   INDICATES CHANGE
 

#MEBP13000424
 

2G-6810: DRAWBAR GP

2G6810 DRAWBAR GROUP
SERIAL NO. 11W1033 TO 11W1146 INCLUSIVE
c229980 MEBP1300
2G6810 DRAWBAR GP Parts scheme
  For full view, you need register

Parts for your 120G MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 4J-8622 [4] BOLT  
  9H-1031 [4] WASHER  
2. 6G-1919 C [1] CAP  
3. 6G-1664 C [1] ADAPTER  
4. 5P-8291 C [5] BOLT  
5. 2H-3764 [2] BOLT  
6. 4D-3907 [4] SHIM .762 mm(.03 in.)thick  
  6D-3133 [6] SHIM .254 mm(.01 in.)thick  
7. 3B-8489 C [1] FITTING  
8. 6G-5442 C [1] BALL  
9. 6G-4848 C [8] PLATE  
10. 2G-6793 [28] SHIM .762 mm(.03 in.)thick  
  2G-6794 [16] SHIM .254 mm(.01 in.)thick  
11. 1D-4612 [2] BOLT  
12. 5P-6652 [12] WASHER  
13. 1K-6870 [10] NUT  
14. 2G-6703 [4] SHOE  
15. 1D-4614 [10] BOLT  
16. 2S-0115 [10] WASHER  
17. 6G-4790 C [1] DRAWBAR AND YOKE ASSEM.  
    (Includes)
18. 8F-9836 [10] LUG  
19. 2G-5849 [1] PLATE ASSEM.  
    (Includes)
19. 2G-5962 [3] BALLSTUD ASSEM.  
    (Each Includes)
  2G-5689 [1] BALLSTUD  
20. 6G-5443 [1] SHAFT ASSEM.  
21. 4B-3604 [8] SETSCREW  
  1D-5119 [8] NUT  
22. 6G-4524 C [8] STRIP  
  C   INDICATES CHANGE
 

#MEBP13000425
 

2G-6810: DRAWBAR GP

2G6810 DRAWBAR GROUP
SERIAL NO. 11W1147-UP
c539580 MEBP1300
2G6810 DRAWBAR GP Parts scheme
  For full view, you need register

Parts for your 120G MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 4J-8622 [4] BOLT  
  9H-1031 [4] WASHER-HARD  
2. 6G-1919 [1] CAP-PIVOT  
3. 6G-1664 [1] ADAPTER  
4. 5P-8291 [5] BOLT  
5. 2H-3764 [2] BOLT  
6. 4D-3907 B [4] SHIM .762MM(.03IN)THK  
  6D-3133 B [6] SHIM .254MM(.01IN)THK  
7. 3B-8489 [1] FITTING-GREASE  
8. 6G-5442 [1] BALL  
9. 6G-4848 C [4] PLATE  
10. 2G-6793 B [36] SHIM .762MM(.03IN)THK  
  2G-6794 B [12] SHIM .254MM(.01IN)THK  
11. 1D-4612 [2] BOLT  
12. 5P-6652 [12] WASHER  
13. 5T-2926 C [4] SHOE-CIRCLE GUIDE  
14. 1D-4614 [10] BOLT 127MM(5IN)LG  
    -OR-
  1D-4612 C [10] BOLT 101.60MM(4IN)LG  
15. 6G-4524 [8] STRIP-WEAR  
16. 5T-2925 C [4] STRIP-WEAR  
   
   
   
   
   
17. 6G-4790 [1] DRAWBAR & YOKE AS  
18. 8F-9836 [10] LUG  
19. 2G-5849 [1] PLATE AS  
20. 2G-5962 [3] BALLSTUD AS  
    (EACH INCLUDES)
  2G-5689 [1] BALLSTUD  
21. 6G-5443 [1] SHAFT AS  
22. 4B-3604 [8] SETSCREW-SQUARE HEAD  
  1D-5119 [8] NUT  
  B   USE AS REQUIRED
  C   CHANGE FROM PREVIOUS TYPE
 

#MEBP13000426
 

2G-8870: AXLE GP-FRONT

2G8870 FRONT AXLE GROUP-PART 1 OF 2
SERIAL NO. 11W1017 TO 11W1090 INCLUSIVE
c228056 MEBP1300
2G8870 AXLE GP-FRONT Parts scheme
  For full view, you need register

Parts for your 120G MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 2G-5667 [2] RETAINER  
2. 2G-8616 [1] PIN  
3. 5P-8842 C [10] SEAL  
4. 0S-1592 [2] BOLT  
  4D-3704 [2] WASHER  
5. 2G-8719 [1] AXLE ASSEM.  
6. 2G-8661 [2] BEARING  
7. 2G-8631 [4] BEARING  
8. 1B-5174 [2] PLUG  
9. 2G-5676 H [1] WASHER 1.52 mm(.060 in.) thick  
10. 0T-0065 [2] BOLT  
  2K-4973 [2] LOCKNUT  
11. 2G-8628 [2] PIN  
12. 2G-8685 [1] BAR ASSEM.  
13. 2G-8624 [2] BEARING  
14. 2G-8612 [1] PIN  
15. 2G-8687 [1] ARM ASSEM. (R.H.)  
    (Includes)
16. 2G-8737 [1] BEARING 6.45cm(2.54in.) long  
  2G-8736 [1] BEARING 6.05cm(2.38in.) long  
17. 2G-8681 [1] HOUSING (R.H.)  
18. 9D-6523 [1] SOCKET ASSEM.  
    (Includes)
  2F-8057 [1] NUT  
19. 8D-2811 [2] WASHER  
  3B-4618 [2] COTTER PIN  
20. 5D-6952 [2] CLAMP  
  1B-4367 [2] BOLT  
  3K-2889 [2] NUT  
21. 9D-6521 [1] ROD  
22. 9D-6524 [1] SOCKET ASSEM.  
    (Includes)
  2F-8057 [1] NUT  
23. 0L-1351 [4] BOLT  
  2G-8768 [4] WASHER (plain)  
24. 2G-8633 [2] PIN  
25. 2G-5675 [2] WASHER 4.78 mm(.188 in.) thick  
26. 2G-8682 [1] HOUSING (L.H.)  
27. 3B-8489 [12] FITTING  
28. 2G-8769 [1] PIN  
29. 5P-1075 [4] WASHER  
  C   INDICATES CHANGE
  H   USE AS REQUIRED
 

#MEBP13000427
 

2G-8870: AXLE GP-FRONT

2G8870 FRONT AXLE GROUP-PART 2 OF 2
SERIAL NO. 11W1017 TO 11W1090 INCLUSIVE
c228057 MEBP1300
2G8870 AXLE GP-FRONT Parts scheme
  For full view, you need register

Parts for your 120G MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 2G-3866 [2] SHIM  
2. 9D-0052 [2] RETAINER  
3. 0L-1351 C [4] BOLT  
4. 2G-8778 [4] SEAL  
  4L-9564 C [4] SEAL-O-RING  
5. 5P-1075 C [4] WASHER  
6. 5P-8081 [4] BOLT  
7. 2G-8742 [2] WASHER  
8. 1B-4367 [2] BOLT  
  4K-0367 [2] NUT  
  4D-3704 [2] WASHER  
9. 4D-0925 [2] LOCK  
10. 0S-1571 [4] BOLT  
11. 9D-0055 [2] LOCK  
12. 2G-8688 [1] ARM ASSEM. (L.H.)  
    (Includes)
  2G-8737 [1] BEARING  
13. 2G-8736 [1] BEARING  
14. 1D-4608 [2] BOLT  
  2J-3506 [2] NUT  
  2S-0115 [2] WASHER  
15. 9D-0044 [2] COVER  
16. 4H-9105 [2] SEAL  
17. 2P-8986 [2] CUP  
  2P-8987 [2] CONE  
18. 0L-1329 [6] BOLT  
19. 2H-8829 [2] PLUG  
  1F-7178 [2] GASKET  
20. 2N-2138 [2] CUP  
  2N-2139 [2] CONE  
21. 2G-8764 [4] RETAINER  
  2G-8760 [4] SEAL RING  
22. 3S-0303 [2] SEAL GROUP  
    (Each Includes)
  3S-0302 [2] RING  
23. 2G-8664 [4] WASHER (outer)  
  2G-8665 [2] WASHER (inner)  
24. 2G-8620 [4] PIN  
25. 5P-8888 C [2] SEAL  
26. 5H-1504 [2] WASHER  
27. 9D-0051 [2] SPINDLE  
  7D-0053 [20] BOLT  
    -OR-
  2G-7679 [2] SPINDLE  
  6V-1319 C [20] STUD  
  C   INDICATES CHANGE
 

#MEBP13000428
 

2G-8870: AXLE GP-FRONT

2G8870 FRONT AXLE GROUP-PART 1 OF 2
SERIAL NO. 11W1091 TO 11W1111 INCLUSIVE
c180392 MEBP1300
2G8870 AXLE GP-FRONT Parts scheme
  For full view, you need register

Parts for your 120G MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 2G-5667 [2] RETAINER  
2. 2G-8616 [1] PIN  
3. 5P-8842 C [10] SEAL  
4. 0S-1592 [2] BOLT  
  4D-3704 [2] WASHER  
5. 2G-8719 [1] AXLE ASSEM.  
6. 2G-8661 [2] BEARING  
7. 2G-8631 [4] BEARING  
8. 1B-5174 [2] PLUG  
9. 2G-5676 H [1] WASHER 1.52 mm(.060 in.) thick  
10. 0T-0065 [2] BOLT  
  2K-4973 [2] LOCKNUT  
11. 2G-8628 [2] PIN  
12. 2G-8685 [1] BAR ASSEM.  
13. 2G-8624 [2] BEARING  
14. 2G-8612 [1] PIN  
15. 2G-8687 [1] ARM ASSEM. (R.H.)  
    (Includes)
16. 2G-8737 [1] BEARING 6.45cm(2.54 in.) long  
  2G-8736 [1] BEARING 6.05cm(2.38in.) long  
17. 2G-8681 [1] HOUSING (R.H.)  
18. 9D-6523 [1] SOCKET ASSEM.  
    (Includes)
  2F-8057 [1] NUT  
19. 8D-2811 [2] WASHER  
  3B-4618 [2] COTTER PIN  
20. 5D-6952 [2] CLAMP  
  1B-4367 [2] BOLT  
  3K-2889 [2] NUT  
21. 9D-6521 [1] ROD  
22. 9D-6524 [1] SOCKET ASSEM.  
    (Includes)
  2F-8057 [1] NUT  
23. 0L-1351 [4] BOLT  
  2G-8768 [4] WASHER (plain)  
24. 2G-8633 [2] PIN  
25. 2G-5675 [2] WASHER 4.78 mm(.188 in.) thick  
26. 2G-8682 [1] HOUSING (L.H.)  
27. 3B-8489 [12] FITTING  
28. 2G-8769 [1] PIN  
29. 5P-1075 [4] WASHER  
  C   INDICATES CHANGE
  H   USE AS REQUIRED
 

#MEBP13000429
 

2G-8870: AXLE GP-FRONT

2G8870 FRONT AXLE GROUP-PART 2 OF 2
SERIAL NO. 11W1091 TO 11W1111 INCLUSIVE
c180393 MEBP1300
2G8870 AXLE GP-FRONT Parts scheme
  For full view, you need register

Parts for your 120G MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 2G-3866 [2] SHIM  
2. 9D-0052 [2] RETAINER  
3. 0L-1351 C [4] BOLT  
4. 2G-8778 [4] SEAL  
  4L-9564 C [4] SEAL-O-RING  
5. 5P-1075 C [4] WASHER  
6. 5P-8081 [4] BOLT  
7. 2G-8742 [2] WASHER  
8. 1B-4367 [2] BOLT  
  4K-0367 [2] NUT  
  4D-3704 [2] WASHER  
9. 4D-0925 [2] LOCK  
10. 0S-1571 [4] BOLT  
11. 9D-0055 [2] LOCK  
12. 2G-8688 [1] ARM ASSEM. (L.H.)  
    (Includes)
  2G-8737 [1] BEARING  
13. 2G-8736 [1] BEARING  
14. 1D-4608 [2] BOLT  
  2J-3506 [2] NUT  
  2S-0115 [2] WASHER  
15. 9D-0044 [2] COVER  
16. 4H-9105 [2] SEAL  
17. 2P-8986 [2] CUP  
  2P-8987 [2] CONE  
18. 0L-1329 [6] BOLT  
19. 2H-8829 [2] PLUG  
  1F-7178 [2] GASKET  
20. 2N-2138 [2] CUP  
  2N-2139 [2] CONE  
21. 2G-8764 [4] RETAINER  
  2G-8760 [4] SEAL RING  
22. 3S-0303 [2] SEAL GROUP  
    (Each Includes)
  3S-0302 [2] RING  
23. 2G-8664 [4] WASHER (outer)  
  2G-8665 [2] WASHER (inner)  
24. 2G-8620 [4] PIN  
25. 5P-8888 C [2] SEAL  
26. 5H-1504 [2] WASHER  
27. 6G-9977 C [2] SPINDLE  
  6V-4250 C [20] BOLT  
  C   INDICATES CHANGE
 

Information:

Caterpillar Parts SIS Catalog 120G :

CIRCLE GP
2C-8282 CIRCLE GP
CIRCLE GP
2C-8282 CIRCLE GP
FRAME GP-FRONT
2C-8490 FRAME GP-FRONT
FRAME GP-FRONT
2C-8490 FRAME GP-FRONT
FRONT FRAME GROUP
2C-8150 FRONT FRAME GROUP
TOOL BOX GP
9D-2700 TOOL BOX GP
HITCH GP-ARTICULATED
8D-9780 HITCH GP-ARTICULATED
BATTERY BOX GP
2G-4500 BATTERY BOX GP
CIRCLE & BEAM AS
2C-8422 CIRCLE & BEAM AS
CIRCLE AND BEAM ASSEMBLY
2C-8281 CIRCLE AND BEAM ASSEMBLY
DRAWBAR GP
2G-6810 DRAWBAR GP
DRAWBAR GP
2G-6810 DRAWBAR GP
DRAWBAR GP
2G-6810 DRAWBAR GP
AXLE GP-FRONT
2G-8870 AXLE GP-FRONT
2G-8870 AXLE GP-FRONT
AXLE GP-FRONT
2G-8870 AXLE GP-FRONT

Truck sale:

Caterpillar 120G
 
Caterpillar 120G
- motor graders
HOLT CAT
 
40,000 
Caterpillar 120G, motor graders, Construction
- motor graders
ALTORFER INC.
Caterpillar H120GCS.CW40S, hammer, Construction
18,210 
Caterpillar H120GCS.CW40S, hammer, Construction
- hammer
BERGERAT MONNOYEUR S.A.S.
Caterpillar 120G, motor graders, Construction
32,000 
Caterpillar 120G, motor graders, Construction
- motor graders
FOLEY EQUIPMENT COMPANY
 
33,500 
Caterpillar HH120GCS, hammer, Construction


Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.