HYDRAULIC SYSTEM
LINES GP-STEERINGVALVE GP-RELIEF
CYLINDER GP
VALVE GP-RELIEF
LINES GP-CYLINDER
HYDRAULIC SYSTEM
LINES GP-STEERING
#MEBP13020490
8D-8610: LINES GP-STEERING
8D8610 LINES GP-STEERING OIL-PART 1 OF 2
TYPE 2. S/N 13W425-685
TYPE 2. S/N 13W425-685
For full view, you need register
Parts for your 140G MOTOR GRADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 3M-0496 | [2] | STUD | |
| 1D-4717 | [2] | NUT | ||
| 2. | 5P-1075 B | [5] | WASHER | |
| 3. | 2B-0941 | [2] | SPACER | |
| 4. | 9D-0953 C | [1] | SPACER | |
| 5. | 0S-0509 CB | [2] | BOLT | |
| 6. | 0S-1591 CB | [1] | BOLT | |
| 7. | 8M-0505 | [2] | CONNECTOR | |
| 8. | 3K-0360 | [7] | SEAL | |
| 9. | 6G-1701 | [1] | HOSE AS. (NOT SERV) | |
| FOR SERVICE FURNISH: | ||||
| 9S-0671 G | HOSE 53.54in.(136cm) | |||
| 3S-8606 | [2] | SLEEVE | ||
| 9S-9727 | [2] | COUPLING | ||
| 10. | 7K-1181 | [3] | STRAP | |
| 11. | 030-7948 | [3] | ELBOW | |
| 12. | 9D-5892 | [1] | HOSE ASSEM. (NOT SERV) | |
| FOR SERVICE FURNISH: | ||||
| 9S-0671 G | HOSE 61.41in.(156cm) | |||
| 3S-8606 | [2] | SLEEVE | ||
| 8S-4055 | [1] | COUPLING AS. (STRAIGHT) | ||
| 9S-9727 | [1] | COUPLING AS. (45 degrees) | ||
| 13. | 4S-1962 CB | [4] | CLIP | |
| 14. | 6K-4936 C | [8] | BOLT | |
| 15. | 6G-1713 | [2] | CLAMP | |
| 16. | 6G-1697 | [1] | HOSE ASSEM. (NOT SERV) | |
| FOR SERVICE FURNISH: | ||||
| 9S-0671 G | HOSE 235IN.(596CM) | |||
| 3S-8606 | [2] | SLEEVE | ||
| 9S-9727 | [1] | COUPLING AS. (45 degrees) | ||
| 8S-4055 | [1] | COUPLING AS. (STRAIGHT) | ||
| 17. | 6G-1692 | [4] | CLAMP | |
| 18. | 6G-0208 | [1] | BOOT | |
| 6G-0237 | [1] | SEAL | ||
| 19. | 3F-1417 C | [6] | WASHER | |
| 20. | 9D-2673 | [2] | CONNECTOR | |
| 21. | 6G-1696 | [1] | HOSE ASSEM. (NOT SERV) | |
| FOR SERVICE FURNISH: | ||||
| 9S-0671 G | HOSE 242IN.(614CM) | |||
| 3S-8606 | [2] | SLEEVE | ||
| 9S-9727 | [1] | COUPLING AS. (45 degrees) | ||
| 8S-4055 | [1] | COUPLING AS. (STRAIGHT) | ||
| B | USE AS REQUIRED | |||
| C | INDICATES CHANGE | |||
| G | ORDER BY THE INCH | |||
#MEBP13020491
8D-8610: LINES GP-STEERING
For full view, you need register
Parts for your 140G MOTOR GRADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 9D-2673 C | [4] | CONNECTOR | |
| 2. | 0T-0065 | [6] | BOLT | |
| 3. | 5P-1075 | [6] | WASHER | |
| 4. | 4S-1962 | [2] | CLIP | |
| 5. | 3K-0360 | [12] | SEAL | |
| 6. | 6G-1702 | [2] | HOSE ASSEM. (not serv.) | |
| For service of each furnish: | ||||
| 9S-0671 H | HOSE 13.60 in. (32 cm) | |||
| 3S-8606 | [2] | SLEEVE | ||
| 8S-6391 | [2] | COUPLING ASSEM. | ||
| 7. | 8M-0505 C | [6] | CONNECTOR | |
| 8. | 3G-7448 Y | [2] | VALVE GROUP (relief) | |
| 9. | 030-7948 | [2] | ELBOW | |
| 10. | 9D-6063 | [2] | HOSE ASSEM. (not serv.) | |
| For service of each furnish: | ||||
| 9S-0671 H | HOSE 34.47 in. (85 cm) | |||
| 8S-6391 | [1] | COUPLING ASSEM. (90 degrees) | ||
| 3S-8606 | [2] | SLEEVE | ||
| 8S-4055 | [1] | COUPLING ASSEM. -(STRAIGHT) | ||
| 11. | 6G-1698 | [2] | HOSE ASSEM. (not serv.) | |
| For service of each furnish: | ||||
| 9S-0671 H | HOSE 28.96 in. (71 cm) | |||
| 8S-4055 | [1] | COUPLING ASSEM. -(STRAIGHT) | ||
| 3S-8606 | [2] | SLEEVE | ||
| 8S-6391 | [1] | COUPLING ASSEM. (90 degrees) | ||
| C | INDICATES CHANGE | |||
| Y | SEPARATE ILLUSTRATION | |||
| H | ORDER BY THE INCH | |||
#MEBP13020492
8D-8610: LINES GP-STEERING
8D8610 LINES GP-STEERING OIL-PART 1 OF 2
TYPE 3. S/N 13W425-685
TYPE 3. S/N 13W425-685
For full view, you need register
Parts for your 140G MOTOR GRADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 3M-0496 C | [3] | STUD | |
| 1D-4717 C | [3] | NUT | ||
| 2. | 5P-1075 B | [5] | WASHER | |
| 3. | 2B-0941 | [2] | SPACER | |
| 4. | 9D-0953 | [1] | SPACER | |
| 5. | 0S-0509 B | [2] | BOLT | |
| 6. | 9D-2673 | [2] | CONNECTOR | |
| 7. | 8M-0505 | [2] | CONNECTOR | |
| 8. | 3K-0360 | [7] | SEAL | |
| 9. | 6G-1701 | [1] | HOSE AS. (NOT SERV) | |
| 9S-0671 G | [1] | HOSE 53.54IN.(136CM) | ||
| 3S-8606 | [2] | SLEEVE | ||
| 9S-9727 | [2] | COUPLING | ||
| 10. | 7K-1181 | [3] | STRAP | |
| 11. | 030-7948 | [3] | ELBOW | |
| 12. | 9D-5892 | [1] | HOSE AS. (NOT SERV) | |
| 9S-0671 G | HOSE 61.41IN.(156CM) | |||
| 3S-8606 | [2] | SLEEVE | ||
| 8S-4055 | [1] | COUPLING AS. (STRAIGHT) | ||
| 9S-9727 | [1] | COUPLING AS.(45 DEGREES) | ||
| 13. | 4S-1962 B | [4] | CLIP | |
| 14. | 6K-4936 | [8] | BOLT | |
| 15. | 6G-1713 | [2] | CLAMP | |
| 16. | 6G-1697 | [1] | HOSE ASSEM. (NOT SERV) | |
| 9S-0671 G | HOSE 235IN.(596CM) | |||
| 3S-8606 | [2] | SLEEVE | ||
| 9S-9727 | [1] | COUPLING AS. (45 DEGREES) | ||
| 8S-4055 | [1] | COUPLING AS. (STRAIGHT) | ||
| 17. | 6G-1692 | [4] | CLAMP | |
| 18. | 6G-0208 | [1] | BOOT | |
| 6G-0237 | [1] | SEAL | ||
| 19. | 3F-1417 | [6] | WASHER | |
| 20. | 6G-1696 | [1] | HOSE AS. (NOT SERV) | |
| 9S-0671 G | HOSE 242IN.(614CM) | |||
| 3S-8606 | [2] | SLEEVE | ||
| 9S-9727 | [1] | COUPLING AS. (45 DEGREES) | ||
| 8S-4055 | [1] | COUPLING AS.(STRAIGHT) | ||
| B | USE AS REQUIRED | |||
| C | INDICATES CHANGE | |||
| G | ORDER BY THE INCH | |||
#MEBP13020493
8D-8610: LINES GP-STEERING
For full view, you need register
Parts for your 140G MOTOR GRADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 9D-2673 | [4] | CONNECTOR | |
| 2. | 0T-0065 | [6] | BOLT | |
| 3. | 5P-1075 | [6] | WASHER | |
| 4. | 4S-1962 | [2] | CLIP | |
| 5. | 3K-0360 | [12] | SEAL | |
| 6. | 6G-1702 | [2] | HOSE ASSEM. (not serv.) | |
| For service of each furnish: | ||||
| 9S-0671 H | HOSE 13.60 in. ( 32 cm) | |||
| 3S-8606 | [2] | SLEEVE | ||
| 8S-6391 | [2] | COUPLING ASSEM. | ||
| 7. | 8M-0505 | [6] | CONNECTOR | |
| 8. | 3G-7448 Y | [2] | VALVE GROUP (relief) | |
| 9. | 030-7948 | [2] | ELBOW | |
| 10. | 9D-6063 | [2] | HOSE ASSEM. (not serv.) | |
| For service of each furnish: | ||||
| 9S-0671 H | HOSE 34.47 in. (85 cm) | |||
| 8S-6391 | [1] | COUPLING ASSEM. (90 degrees) | ||
| 3S-8606 | [2] | SLEEVE | ||
| 8S-4055 | [1] | COUPLING ASSEM. (straight) | ||
| 11. | 6G-1698 | [2] | HOSE ASSEM. (not serv.) | |
| For service of each furnish: | ||||
| 9S-0671 H | HOSE 28.96 in. (71 cm) | |||
| 8S-4055 | [1] | COUPLING ASSEM. (straight) | ||
| 3S-8606 | [2] | SLEEVE | ||
| 8S-6391 | [1] | COUPLING ASSEM. (90 degrees) | ||
| C | INDICATES CHANGE | |||
| Y | SEPARATE ILLUSTRATION | |||
| H | ORDER BY THE INCH | |||
#MEBP13020494
5T-9752: LINES GP-STEERING
For full view, you need register
Parts for your 140G MOTOR GRADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 7K-1181 | [5] | STRAP-CABLE (4IN DIA) | |
| 2. | 6G-0237 | [1] | SEAL | |
| 3. | 6V-8639 | [6] | CONNECTOR-SEAL | |
| 4. | 3K-0360 | [15] | SEAL-O-RING (16.36MM ID) | |
| 5. | 6V-8625 | [7] | ELBOW (90 DEG.) (3/4-16 THD) | |
| 6. | 0S-0509 | [2] | BOLT (3/8-16X.75IN) | |
| 7. | 5T-9724 I | [1] | HOSE AS | |
| 8. | 6V-8398 | [15] | SEAL-0-RING (12.47MM ID) | |
| 9. | 0T-0065 | [3] | BOLT (3/8-16X3.5IN) | |
| 10. | 5M-2894 | [8] | WASHER (2.5MM THK) | |
| 11. | 3F-1417 | [6] | WASHER (3MM THK) | |
| 12. | 4T-9340 Y | [1] | VALVE GP-RELIEF (RELIEF) | |
| 14. | 4S-1962 | [6] | CLIP (25.4MM ID) | |
| 17. | 9D-0953 | [1] | SPACER (.88IN THK) | |
| 18. | 2B-0941 | [2] | SPACER (19MM THK) | |
| 19. | 8T-0077 | [2] | CONNECTOR | |
| 20. | 6K-4936 | [8] | BOLT-LOCKING (3/8-16X15.88MM) | |
| 21. | 6G-1692 | [4] | CLAMP | |
| 22. | 3M-0496 | [3] | STUD-TAPERLOCK (.374IN NC X 2.60) | |
| 23. | 6V-8801 | [3] | NUT (3/8-16 THD) | |
| 24. | 6G-1713 | [2] | CLAMP | |
| 25. | 6G-0208 | [1] | BOOT | |
| 26. | 8W-0269 I | [1] | HOSE AS | |
| I | SEE HOSE FABRICATION GUIDE | |||
| Y | SEPARATE ILLUSTRATION | |||
#MEBP13020495
3G-7448: VALVE GP-RELIEF
3G7448 VALVE GP-DIRECT OPERATED RELIEF
S/N 13W425-685
PART OF 8D8610 STEERING OIL LINES
S/N 13W425-685
PART OF 8D8610 STEERING OIL LINES
For full view, you need register
Parts for your 140G MOTOR GRADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 4J-5267 | [2] | SEAL | |
| 2. | 9S-1366 | [8] | BOLT | |
| 3. | 3G-7446 | [2] | COVER | |
| 4. | 3G-7445 | [1] | SEAT | |
| 5. | 9S-8005 | [1] | PLUG | |
| 3K-0360 | [1] | SEAL | ||
| 6. | 3G-7447 | [1] | BODY | |
| 7. | 3G-8593 | [1] | PLATE | |
| 4B-4158 | [1] | SCREW | ||
| 8. | 5J-9631 | [1] | SPRING | |
| 9. | 5J-4857 H | [15] | SHIM .254 mm(.01 in.) thick | |
| 3G-8592 H | [1] | SHIM .13 mm(.005 in.) thick | ||
| 10. | 4J-0527 | [2] | SEAL | |
| 11. | 3G-7444 | [1] | VALVE | |
| 12. | 4J-0519 | [1] | SEAL | |
| H | USE AS REQUIRED | |||
#MEBP13020496
8D-3310: CYLINDER & MTG GP-STEERING
8D3310 STEERING CYLINDER AND MOUNTING GROUP
3G8069 & 3G8070 CYLINDER PARTS ARE SHOWN ON PAGES 152 & 153
3G8069 & 3G8070 CYLINDER PARTS ARE SHOWN ON PAGES 152 & 153
For full view, you need register
Parts for your 140G MOTOR GRADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 0L-1351 | [2] | BOLT | |
| 3B-4506 | [2] | LOCKWASHER | ||
| 2. | 3G-8069 C | [1] | CYLINDER GROUP (R. H.) | |
| 3G-8070 CY | [1] | CYLINDER GROUP (L. H.) | ||
| (Separate Illustration) | ||||
| 3. | 3B-4618 | [2] | PIN | |
| 4. | 8D-2811 | [2] | WASHER | |
| 5. | 6G-1780 C | [2] | SOCKET GROUP | |
| (Each Includes) | ||||
| 6. | 2F-8057 | [1] | NUT | |
| 7. | 2H-3786 | [2] | NUT | |
| 8. | 8D-2429 | [2] | PIN ASSEM. | |
| 9. | 8D-2638 | [4] | SPACER | |
| C | INDICATES CHANGE | |||
| Y | SEPARATE ILLUSTRATION | |||
#MEBP13020497
4T-9340: VALVE GP-RELIEF
4T9340 VALVE GP-DIRECT OPERATED RELIEF
S/N 13W686-UP
PART OF 5T9752 STEERING OIL LINES
S/N 13W686-UP
PART OF 5T9752 STEERING OIL LINES
For full view, you need register
Parts for your 140G MOTOR GRADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 4T-9337 | [1] | BODY-RELIEF | |
| 2. | 5P-3903 | [2] | ADAPTER-O-RING | |
| 3. | 4T-9336 | [2] | SEAT | |
| 4. | 4B-4158 | [1] | SCREW | |
| 5. | 3G-7444 | [2] | VALVE (CROSSOVER STEERING) | |
| 6. | 5J-9631 | [2] | SPRING | |
| 7. | 9S-8005 | [2] | PLUG-O-RING | |
| 3K-0360 | [2] | SEAL-O-RING | ||
| 8. | 1N-6002 | [4] | SEAL-O-RING | |
| 9. | 4J-0521 | [2] | SEAL-O-RING | |
| 10. | 3G-8592 B | [2] | SHIM .13MM(.005IN.)THK. | |
| 5J-4857 B | [30] | SHIM .254MM(.01IN.)THK. | ||
| B | USE AS REQUIRED | |||
#MEBP13020498
8D-2820: LINES GP-LIFT CYLINDER
8D2820 LINES GP-LIFT CYLINDER
S/N 13W425-685
8J9974-PAGE 150, 8J9975-PAGE 160
S/N 13W425-685
8J9974-PAGE 150, 8J9975-PAGE 160
For full view, you need register
Parts for your 140G MOTOR GRADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 8D-9088 | [4] | CONNECTOR | |
| 2. | 3K-0360 C | [16] | SEAL | |
| 3. | 9D-5984 | [4] | HOSE ASSEM. (not serv) | |
| For service of each furnish: | ||||
| 5P-0178 H | HOSE 154 cm(60.63 in.) | |||
| 1P-9919 | [1] | COUPLING ASSEM. (45degrees) | ||
| 5P-2467 | [1] | COUPLING ASSEM. (90degrees) | ||
| 4S-5414 | [2] | SLEEVE | ||
| 4. | 005-4362 C | [8] | ELBOW | |
| 5. | 2G-9989 C | [4] | HOSE ASSEM. (not serv) | |
| For service of each furnish: | ||||
| 5P-0178 H | HOSE 129 cm(50.80 in.) | |||
| 8S-6417 | [1] | COUPLING ASSEM. (straight) | ||
| 1P-9919 | [1] | COUPLING ASSEM. (45degrees) | ||
| 4S-5414 | [2] | SLEEVE | ||
| 6. | 2G-5494 C | [2] | CLAMP | |
| 7. | 2H-9889 C | [2] | CAPSCREW | |
| 8. | 1D-4717 C | [2] | NUT | |
| 9. | 7D-9984 C | [2] | ELBOW | |
| 10. | 0L-1143 | [6] | BOLT | |
| 11. | 8J-9974 Y | [1] | VALVE GROUP (R.H. CHECK) | |
| 8J-9975 Y | [1] | VALVE GROUP (L.H. CHECK) | ||
| (Separate Illustration) | ||||
| 12. | 5P-1075 C | [6] | WASHER | |
| 13. | 030-8188 C | [2] | CONNECTOR | |
| 14. | 3H-3244 C | [2] | SPACER | |
| 15. | 1S-0994 C | [4] | CLIP | |
| 16. | 4B-4278 C | [2] | WASHER | |
| C | INDICATES CHANGE | |||
| Y | SEPARATE ILLUSTRATION | |||
| H | ORDER BY THE CENTIMETER | |||
#MEBP13020499
8W-0213: LINES GP-LIFT CYLINDER
For full view, you need register
Parts for your 140G MOTOR GRADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 8T-0076 | [4] | CONNECTOR | |
| 2. | 3K-0360 | [16] | SEAL | |
| 3. | 8W-0208 | [4] | HOSE AS. | |
| 4. | 6V-8723 | [8] | ELBOW | |
| 5. | 8W-0209 | [2] | HOSE AS. | |
| 6. | 2G-5494 | [2] | CLAMP | |
| 7. | 1S-0994 | [4] | CLIP | |
| 8. | 5P-1075 | [6] | WASHER | |
| 9. | 2H-9889 | [2] | CAPSCREW | |
| 1D-4717 | [2] | NUT | ||
| 3H-3244 | [2] | SPACER | ||
| 10. | 6V-9876 | [2] | ELBOW | |
| 11. | 6V-8634 | [2] | CONNECTOR | |
| 12. | 6V-8397 | [16] | SEAL | |
| 13. | 0L-1143 | [6] | BOLT | |
| 14. | 8J-9974 Y | [1] | VALVE GP. (R.H. CHECK) | |
| 8J-9975 Y | [1] | VALVE GP. (L.H. CHECK) | ||
| 15. | 4B-4278 | [4] | WASHER | |
| Y | SEPARATE ILLUSTRATION | |||
