AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

8D8590 HYDRAULIC ARTICULATION LINES GROUP-1 CIRCUIT SERIAL NO. 13W425 TO 13W445 INCLUSIVE 8J9974-PAGE 150 140G


HYDRAULIC SYSTEM
LINES GP-HYDRAULIC
CYLINDER GP
LINES GP-HYDRAULIC
CYLINDER GP

MOTOR GRADER 140G MOTOR GRADER 13W
 140G MOTOR GRADER 13W00425-00740 (MACHINE) POWERED BY 3306DI ENGINE MEBP1302 140G 13W   (1975)

HYDRAULIC SYSTEM

LINES GP-HYDRAULIC
LINES GP-HYDRAULIC
5T-5898 LINES GP-HYDRAULIC
LINES GP-HYDRAULIC
8W-0373 LINES GP-HYDRAULIC
LINES GP-HYDRAULIC
8D-8590 LINES GP-HYDRAULIC
LINES GP-HYDRAULIC
8D-8590 LINES GP-HYDRAULIC
LINES GP-HYDRAULIC
8D-8590 LINES GP-HYDRAULIC
LINES GP-HYDRAULIC
8D-8590 LINES GP-HYDRAULIC
 

#MEBP13020520
 

8D-8590: LINES GP-HYDRAULIC

8D8590 HYDRAULIC ARTICULATION LINES GROUP-1 CIRCUIT
SERIAL NO. 13W425 TO 13W445 INCLUSIVE
8J9974-PAGE 150
c158102 MEBP1302
8D8590 LINES GP-HYDRAULIC Parts scheme
  For full view, you need register

Parts for your 140G MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 030-8188 C [5] ELBOW  
2. 3K-0360 [16] SEAL  
3. 9D-6048 C [1] HOSE ASSEM. (not serv)  
    For service furnish:
  5P-0178 H HOSE 97 cm(38.19 in.)  
  8S-6417 [2] COUPLING ASSEM. (straight)  
  4S-5414 [2] SLEEVE  
4. 9D-5975 [1] HOSE ASSEM. (not serv)  
    For service furnish:
  5P-0178 H HOSE 57 cm(22.4 in.)  
  8S-6417 [1] COUPLING ASSEM. (straight)  
  8S-6393 [1] COUPLING ASSEM. (90 degrees)  
  4S-5414 [2] SLEEVE  
5. 0T-0102 [1] BOLT  
6. 5P-1075 C [6] WASHER  
7. 6D-4247 [1] CLIP  
8. 9D-5974 [1] HOSE ASSEM. (not serv)  
    For service furnish:
  5P-0178 H HOSE 32 cm(12.6 in.)  
  8S-6417 [1] COUPLING ASSEM. (straight)  
  8S-6393 [1] COUPLING ASSEM. (90 degrees)  
  4S-5414 [2] SLEEVE  
9. 7D-9984 C [7] ELBOW  
10. 9D-5971 [2] HOSE ASSEM. (not serv)  
    For service of each furnish:
  5P-0178 H HOSE 40 cm(15.8 in.)  
  8S-6417 [1] COUPLING ASSEM. (straight)  
  8S-6392 [1] COUPLING ASSEM. (90 degrees)  
  4S-5414 [2] SLEEVE  
11. 005-4362 [4] ELBOW  
12. 8J-9974 Y [1] VALVE GROUP (check)  
    (Separate Illustration)
13. 9D-5972 [1] HOSE ASSEM. (not serv)  
    For service furnish:
  5P-0178 H HOSE 67 cm(26.4 in.)  
  8S-6417 [2] COUPLING ASSEM. (straight)  
  4S-5414 [2] SLEEVE  
14. 8D-1691 [1] BLOCK  
15. 0L-1143 [5] BOLT  
16. 9D-5973 [1] HOSE ASSEM. (not serv)  
    For service furnish:
  5P-0178 H HOSE 79 cm(30.1 in.)  
  8S-6417 [2] COUPLING ASSEM. (straight)  
  4S-5414 [2] SLEEVE  
17. 9D-5862 [1] HOSE ASSEM. (not serv)  
    For service furnish:
  5P-0178 H HOSE 54cm(21.26 in.)  
  8S-6417 [2] COUPLING ASSEM. (straight)  
  4S-5414 [2] SLEEVE  
  C   INDICATES CHANGE
  Y   SEPARATE ILLUSTRATION
  H   ORDER BY THE CENTIMETRE
 

#MEBP13020521
 

8D-8590: LINES GP-HYDRAULIC

8D8590 HYDRAULIC ARTICULATION LINES GROUP-1 CIRCUIT
SERIAL NO. 13W446 TO 13W480 INCLUSIVE
8J9974-PAGE 150
c300350 MEBP1302
8D8590 LINES GP-HYDRAULIC Parts scheme
  For full view, you need register

Parts for your 140G MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 030-8188 C [5] ELBOW  
2. 3K-0360 [16] SEAL  
3. 9D-6048 C [1] HOSE ASSEM. (not serv)  
    For service furnish:
  5P-0178 H HOSE 97 cm(38.19 in.)  
  8S-6417 [2] COUPLING ASSEM. (straight)  
  4S-5414 [2] SLEEVE  
4. 9D-5975 [1] HOSE ASSEM. (not serv)  
    For service furnish:
  5P-0178 H HOSE 57 cm(22.4 in.)  
  8S-6417 [1] COUPLING ASSEM. (straight)  
  8S-6393 [1] COUPLING ASSEM. (90 degrees)  
  4S-5414 [2] SLEEVE  
5. 0T-0102 [1] BOLT  
6. 5P-1075 C [6] LOCKWASHER  
7. 6D-4247 [1] CLIP  
8. 9D-5974 [1] HOSE ASSEM. (not serv)  
    For service furnish:
  5P-0178 H HOSE 32 cm(12.6 in.)  
  8S-6417 [1] COUPLING ASSEM. (straight)  
  8S-6393 [1] COUPLING ASSEM. (90 degrees)  
  4S-5414 [2] SLEEVE  
9. 7D-9984 C [7] ELBOW  
10. 9D-5971 [2] HOSE ASSEM. (not serv)  
    For service of each furnish:
  5P-0178 H HOSE 40 cm(15.8 in.)  
  8S-6417 [1] COUPLING ASSEM. (straight)  
  8S-6392 [1] COUPLING ASSEM. (90 degrees)  
  4S-5414 [2] SLEEVE  
11. 005-4362 [4] ELBOW  
12. 8J-9974 Y [1] VALVE GROUP (check)  
    (Separate Illustration)
13. 9D-5859 C [1] HOSE ASSEM. (not serv)  
    For service furnish:
  5P-0178 CH HOSE 72 cm(28.3 in.)  
  8S-6417 [2] COUPLING ASSEM. (straight)  
  4S-5414 [2] SLEEVE  
14. 8D-1691 [1] BLOCK  
15. 0L-1143 [5] BOLT  
16. 9D-5973 [1] HOSE ASSEM. (not serv)  
    For service furnish:
  5P-0178 H HOSE 79 cm(30.1 in.)  
  8S-6417 [2] COUPLING ASSEM. (straight)  
  4S-5414 [2] SLEEVE  
17. 9D-5862 [1] HOSE ASSEM. (not serv)  
    For service furnish:
  5P-0178 H HOSE 54cm(21.26 in.)  
  8S-6417 [2] COUPLING ASSEM. (straight)  
  4S-5414 [2] SLEEVE  
  C   INDICATES CHANGE
  Y   SEPARATE ILLUSTRATION
  H   ORDER BY THE CENTIMETER
 

#MEBP13020522
 

8D-8590: LINES GP-HYDRAULIC

8D8590 ARTICULATION LINES GROUP-1 CIRCUIT
SERIAL NO. 13W481 TO 13W600 INCLUSIVE
8J9974-PAGE 150
c301127 MEBP1302
8D8590 LINES GP-HYDRAULIC Parts scheme
  For full view, you need register

Parts for your 140G MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 030-8188 [5] ELBOW  
2. 3K-0360 [16] SEAL  
3. 9D-6048 [1] HOSE ASSEM. (not serv)  
    For service furnish:
  2P-5943 CH HOSE 38.19 in.(97 cm)  
  8S-6417 [2] COUPLING ASSEM. (straight)  
  4S-5414 [2] SLEEVE  
4. 9D-5975 [1] HOSE ASSEM. (not serv)  
    For service furnish:
  2P-5943 CH HOSE 22.4 in. (57 cm)  
  8S-6417 [1] COUPLING ASSEM. (straight)  
  8S-6393 [1] COUPLING ASSEM. (90 degrees)  
  4S-5414 [2] SLEEVE  
5. 0T-0102 [1] BOLT  
6. 5P-1075 [6] LOCKWASHER  
7. 6D-4247 [1] CLIP  
8. 9D-5974 [1] HOSE ASSEM. (not serv)  
    For service furnish:
  2P-5943 CH HOSE 12.6 in. (32 cm)  
  8S-6417 [1] COUPLING ASSEM. (straight)  
  8S-6393 [1] COUPLING ASSEM. (90 degrees)  
  4S-5414 [2] SLEEVE  
9. 7D-9984 C [9] ELBOW  
10. 5T-2460 C [2] HOSE ASSEM. (not serv)  
    For service of each furnish:
  2P-5943 CH HOSE 18.5 in. (47 cm)  
  8S-6417 [1] COUPLING ASSEM. (straight)  
  8S-6393 [1] COUPLING ASSEM. (90 degrees)  
  4S-5414 [2] SLEEVE  
11. 005-4362 C [2] ELBOW  
12. 8J-9974 Y [1] VALVE GROUP (check)  
    (Separate Illustration)
13. 9D-5859 [1] HOSE ASSEM. (not serv)  
    For service furnish:
  2P-5943 CH HOSE 28.3 in. (72 cm)  
  8S-6417 [2] COUPLING ASSEM. (straight)  
  4S-5414 [2] SLEEVE  
14. 8D-1691 [1] BLOCK  
15. 0L-1143 [5] BOLT  
16. 9D-5973 [1] HOSE ASSEM. (not serv)  
    For service furnish:
  2P-5943 CH HOSE 30.1 in. (79 cm)  
  8S-6417 [2] COUPLING ASSEM. (straight)  
  4S-5414 [2] SLEEVE  
17. 9D-5862 [1] HOSE ASSEM. (not serv)  
    For service furnish:
  2P-5943 CH HOSE 21.26 in. (54 cm)  
  8S-6417 [2] COUPLING ASSEM. (straight)  
  4S-5414 [2] SLEEVE  
  C   INDICATES CHANGE
  Y   SEPARATE ILLUSTRATION
  H   ORDER BY THE INCH
 

#MEBP13020523
 

8D-8590: LINES GP-HYDRAULIC

8D8590 LINES GP-HYDRAULIC ARTICULATION
1 CIRCUIT. S/N 13W601-685
8J9974-PAGE 150
c331065 MEBP1302
8D8590 LINES GP-HYDRAULIC Parts scheme
  For full view, you need register

Parts for your 140G MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8M-0505 C [4] CONNECTOR  
2. 3K-0360 C [10] SEAL-O-RING  
3. 5T-5225 C [1] HOSE AS  
4. 5T-7694 C [1] HOSE AS  
5. 6D-4247 [1] CLIP  
6. 0T-0102 [1] BOLT  
7. 5P-1075 C [4] WASHER-HARD  
8. 030-7959 C [2] TEE-FLARED  
9. 8J-9974 Y [1] VALVE GP-CHECK  
10. 7D-9984 C [4] ELBOW  
11. 5T-7693 C [1] HOSE AS  
12. 5T-7692 C [1] HOSE AS  
13. 0L-1143 C [3] BOLT  
14. 5T-7299 C [1] HOSE AS  
15. 5T-7298 C [1] HOSE AS  
  C   CHANGE FROM PREVIOUS TYPE
  Y   SEPARATE ILLUSTRATION
 

#MEBP13020524
 

3G-4752: CYLINDER GP-WHEEL LEAN

3G4752 WHEEL LEANING CYLINDER GROUP-(CHANGE 0-2)-88.9 MM (3.5 IN.)
BORE X 148.84 MM (5.86 IN.) STROKE
PART OF 2G8580 LEANING WHEEL CYLINDER AND MOUNTING
c304264 MEBP1302
3G4752 CYLINDER GP-WHEEL LEAN Parts scheme
  For full view, you need register

Parts for your 140G MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7J-5639 [1] BOLT  
2. 8J-7415 [1] WASHER  
3. 7J-9885 [1] RING  
4. 5J-7013 [1] SEAL ASSEM.  
5. 7J-9886 [1] PISTON  
6. 7J-9887 [1] CROWN  
7. 3G-4761 [1] ROD ASSEM.  
8. 4J-8979 [1] SEAL  
9. 5J-8150 [1] SEAL  
10. 3G-4754 R [1] CYLINDER ASSEM.  
11. 6J-9733 [1] SEAL  
12. 2H-3931 [1] SEAL  
  4J-9224 [1] RING  
13. 7J-9888 [1] HEAD  
  R   RMFG PART MAY BE AVAILABLE
 

#MEBP13020525
 

8D-8600: LINES GP-HYDRAULIC

8D8600 LINES GP-HYDRAULIC LEANING WHEEL
S/N 13W425-685
8J5913-PAGE 144
c227979 MEBP1302
8D8600 LINES GP-HYDRAULIC Parts scheme
  For full view, you need register

Parts for your 140G MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 030-8188 [4] CONNECTOR  
2. 3K-0360 [8] SEAL  
3. 9D-8488 C [2] HOSE ASSEM. (not serv)  
    For service of each furnish:
  2P-5943 H HOSE 167 in. (424 cm)  
  8S-6417 [1] COUPLING ASSEM. (straight)  
  4S-5414 [2] SLEEVE  
  1P-9919 [1] COUPLING ASSEM. (45 degrees)  
4. 6D-4247 C [1] CLIP  
5. 7D-9984 [3] ELBOW  
6. 0L-1143 C [1] BOLT  
7. 8J-5913 Y [1] CHECK VALVE GROUP  
    (Separate Illustration)
8. 9D-5857 [1] HOSE ASSEM. (not serv)  
    For service furnish:
  5P-5943 CH HOSE 28.35 in. (72 cm)  
  4S-5414 [2] SLEEVE  
  8S-6417 [2] COUPLING ASSEM.  
9. 9D-5970 [1] HOSE ASSEM. (not serv)  
    For service furnish:
  2P-5943 CH HOSE 30.31 in. (77 cm)  
  8S-6417 [1] COUPLING ASSEM. (straight)  
  4S-5414 [2] SLEEVE  
  8S-6392 [1] COUPLING ASSEM. (90 degrees)  
10. 3S-2093 C [1] STRAP  
11. 005-4362 [1] ELBOW  
12. 6K-4936 C [1] BOLT  
13. 5P-1075 C [4] WASHER 4mm(.157 in.) thick  
14. 0T-0573 C [2] BOLT  
  7K-4743 C [2] WASHER 6.35mm(.250 in.)thick  
  H   ORDER BY THE INCH
  Y   SEPARATE ILLUSTRATION
  C   INDICATES CHANGE
 

#MEBP13020526
 

8W-0207: LINES GP-HYDRAULIC

8W0207 LINES GP-HYDRAULIC LEANING WHEEL
S/N 13W686-UP
8J5913-PAGE 144
c327253 MEBP1302
8W0207 LINES GP-HYDRAULIC Parts scheme
  For full view, you need register

Parts for your 140G MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 6V-8634 [4] CONNECTOR  
2. 3K-0360 [8] SEAL 1.63CM(.644IN.)I.D.  
3. 8W-0206 [2] HOSE AS.  
4. 6D-4247 [1] CLIP  
5. 6V-9876 [3] ELBOW  
6. 0L-1143 [1] BOLT  
7. 8J-5913 Y [1] CHECK VALVE GRP.  
    (CYL. LOCK CHECK)
8. 8W-0125 [1] HOSE AS.  
9. 8W-0120 [1] HOSE AS.  
10. 3S-2093 [1] STRAP  
11. 6V-8723 [1] ELBOW  
12. 6K-4936 [1] BOLT  
13. 5P-1075 [4] WASHER 4MM(.157IN.)THK  
14. 0T-0573 [2] BOLT  
  7K-4743 [2] WASHER 6.35MM(.250IN.)THK  
15. 6V-8397 [8] SEAL .92CM(.364IN.)I.D.  
  Y   SEPARATE ILLUSTRATION
 

#MEBP13020527
 

2G-6540: CYLINDER & MTG GP-SCARIFIER

2G6540 SCARIFIER CYLINDER AND MOUNTING GROUP
PART OF 2G6835 VEE SCARIFIER ARRANGEMENT LISTED ON PAGE 208
3G1853 CYLINDER PARTS ARE SHOWN ON PAGE 175. AN ATTACHMENT
c216719 MEBP1302
2G6540 CYLINDER & MTG GP-SCARIFIER Parts scheme
  For full view, you need register

Parts for your 140G MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 5D-0213 [2] LOCK  
2. 8D-7225 [2] PIN  
  8D-7086 [2] BEARING  
3. 0S-1621 [4] BOLT  
  3B-4508 [4] LOCKWASHER  
4. 3G-1853 Y [1] CYLINDER GROUP  
    (Separate Illustration)
5. 7K-9202 [4] SEAL  
  Y   SEPARATE ILLUSTRATION
 

#MEBP13020528
 

2G-8580: CYLINDER & MTG GP-WHEEL LEAN

2G8580 LEANING WHEEL CYLINDER AND MOUNTING GROUP
3G4752 CYLINDER PARTS ARE SHOWN ON PAGE 172
c217109 MEBP1302
2G8580 CYLINDER & MTG GP-WHEEL LEAN Parts scheme
  For full view, you need register

Parts for your 140G MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3G-4752 Y [1] CYLINDER GROUP  
    (Separate Illustration)
2. 2G-5667 [1] RETAINER  
3. 5P-8842 C [4] SEAL  
4. 2G-8631 [2] BEARING  
5. 0S-1592 [1] BOLT  
  4D-3704 [1] WASHER  
6. 2G-8609 [1] PIN  
7. 5D-0213 [1] LOCK  
8. 6H-1717 [2] BOLT  
  2M-0849 [2] WASHER  
9. 3B-8489 C [2] FITTING  
  C   INDICATES CHANGE
  Y   SEPARATE ILLUSTRATION
 

#MEBP13020529
 

8W-2913: CYLINDER & MTG GP-SCARIFIER

8W2913 CYLINDER & MOUNTING GP
9T2554-PAGE 174.02
PART OF 8W2410 SCARIFIER AR
AN ATTACHMENT
c403607 MEBP1302
8W2913 CYLINDER & MTG GP-SCARIFIER Parts scheme
  For full view, you need register

Parts for your 140G MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7K-9202 [4] SEAL-LIP TYPE  
2. 8D-7086 [2] BEARING  
3. 9T-2554 Y [1] CYLINDER GP-SCARIFIER  
4. 6G-7187 [2] LOCK  
5. 8D-7225 [2] PIN  
6. 0S-1621 [4] BOLT  
  5P-8245 [4] WASHER  
  Y   SEPARATE ILLUSTRATION
 

Information:

Special Instruction
Hose and Coupling Assembly and Repair Process Guide{0684, 3016, 3103, 3154, 4133, 4257, 4304, 5057, 7554}
Hose and Coupling Assembly and Repair Process Guide{0684, 3016, 3103, 3154, 4133, 4257, 4304, 5057, 7554}
New Hose Couplings Are Now Used{0684, 5057, 5057, 7554}
New Hose Couplings Are Now Used{0684, 5057, 5057, 7554}
Technical Information Bulletin
Some Hydraulic Couplings are Identified with an Incorrect Part Number{5057}
Some Hydraulic Couplings are Identified with an Incorrect Part Number{5057}
Tool Operating Manual
358-4528 (380/480 V, 50/60 Hz, 3 Phase), 457-6040 (230V, 60 Hz, Single Phase) , 457-6039 (230V, 50 Hz, Single Phase) Hose Machine Group Set-Up and Operation{0599, 0684}
358-4528 (380/480 V, 50/60 Hz, 3 Phase), 457-6040 (230V, 60 Hz, Single Phase) , 457-6039 (230V, 50 Hz, Single Phase) Hose Machine Group Set-Up and Operation{0599, 0684}
Crimputer III Setup and Operation{0684, 5057}
Crimputer III Setup and Operation{0684, 5057}
242-3567 Variable Crimp Die Bowl{0684}
242-3567 Variable Crimp Die Bowl{0684}
Crimping Caterpillar 1E294, 1E716, 1E844 Hose and Couplings {0374, 0599, 0684, 0738, 5057}
Crimping Caterpillar 1E294, 1E716, 1E844 Hose and Couplings {0374, 0599, 0684, 0738, 5057}
Using the 209-3153 Portable Hose Machine {0374, 0599, 0684, 0738, 5057}
Using the 209-3153 Portable Hose Machine {0374, 0599, 0684, 0738, 5057}
4C-9910 Portable Hydraulic Tester (Flow 125 GPM) {0599, 0784, 5050, 5057, 5095}
4C-9910 Portable Hydraulic Tester (Flow 125 GPM) {0599, 0784, 5050, 5057, 5095}
Converting 137-7238 Hose Assembly Machines and 134-5640 Hose Assembly Machines (100 Ton) from Sony Control to Crimputer Control{0374, 0599, 0684, 5057}
Converting 137-7238 Hose Assembly Machines and 134-5640 Hose Assembly Machines (100 Ton) from Sony Control to Crimputer Control{0374, 0599, 0684, 5057}
Set up and Basic Operation of the 145-5161 Floor Model Hose Machine {0374, 0599, 0684, 0738, 5057}
Set up and Basic Operation of the 145-5161 Floor Model Hose Machine {0374, 0599, 0684, 0738, 5057}
Using the 9U-5792, 4C-5052, 4C-5054, 4C-3670, and 4C-3680 Hydraulic Hose Machines{0374, 0599, 0684, 0738, 5057}
Using the 9U-5792, 4C-5052, 4C-5054, 4C-3670, and 4C-3680 Hydraulic Hose Machines{0374, 0599, 0684, 0738, 5057}
Reuse And Salvage Guidelines
Crimputer III Setup and Operation{0684, 5057}
Crimputer III Setup and Operation{0684, 5057}
Service Magazine
Color Coded Dust Caps for S·O·S Ports Will Be Available {7770}
2003/12/01
Information Release Memo, HOS04-02, "XT-6 Hose and Couplings to XT-6 ES Components" Is Available {5057}
2004/06/21
Information Release Memo, PELJ0340 , "Reusable Couplings for Caterpillar -12 and -16 XT-6 ES Hose" {5057}
2004/06/28
Five New Wrenches Remove Snap To Connect Couplings from Hydraulic Hose Assemblies {0602, 0738, 5057}
2006/02/13
Caterpillar Hose and Coupling Practices {0618, 1000, 5057, 7000}
2008/05/26

Caterpillar Parts SIS Catalog 140G :

CYLINDER GP-ARTICULATION
8J-0546 CYLINDER GP-ARTICULATION
SWIVEL GP
8J-0384 SWIVEL GP
CYLINDER & MTG GP-ARTICULATION
8D-4520 CYLINDER & MTG GP-ARTICULATION
LINES GP-HYDRAULIC
8W-0373 LINES GP-HYDRAULIC
LINES GP-HYDRAULIC
5T-5898 LINES GP-HYDRAULIC
LINES GP-HYDRAULIC
2G-3450 LINES GP-HYDRAULIC
LINES GP-HYDRAULIC
8W-0174 LINES GP-HYDRAULIC
LINES GP-HYDRAULIC
2G-3430 LINES GP-HYDRAULIC
LINES GP-HYDRAULIC
8D-8590 LINES GP-HYDRAULIC
LINES GP-HYDRAULIC
8D-8590 LINES GP-HYDRAULIC
LINES GP-HYDRAULIC
8D-8590 LINES GP-HYDRAULIC
CYLINDER GP-WHEEL LEAN
3G-4752 CYLINDER GP-WHEEL LEAN
LINES GP-HYDRAULIC
8D-8600 LINES GP-HYDRAULIC
LINES GP-HYDRAULIC
8W-0207 LINES GP-HYDRAULIC
CYLINDER & MTG GP-SCARIFIER
2G-6540 CYLINDER & MTG GP-SCARIFIER
CYLINDER & MTG GP-WHEEL LEAN
2G-8580 CYLINDER & MTG GP-WHEEL LEAN

Truck sale:

Caterpillar 140G
 
Caterpillar 140G
- motor graders
ZIEGLER CAT
Caterpillar 140G, motor graders, Construction
68,000 
Caterpillar 140G, motor graders, Construction
- motor graders
MICHIGAN CAT
Caterpillar 140 GC, motor graders, Construction
225,000 
Caterpillar 140 GC, motor graders, Construction
- motor graders
KELLY TRACTOR CO.
Caterpillar 140 GC, motor graders, Construction
247,000 
Caterpillar 140 GC, motor graders, Construction
- motor graders
KELLY TRACTOR CO.
Caterpillar 140G, motor graders, Construction
69,000 
Caterpillar 140G, motor graders, Construction
- motor graders
ZIEGLER CAT
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.