AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

9G9288 PROTECTION COVER GROUP-HYDRAULIC TANK CAP SERIAL NO. 13W446-UP 140G MOTOR GRADER


HYDRAULIC SYSTEM
TANK GP
DRIVE GP
LINES GP-PUMP

MOTOR GRADER 140G MOTOR GRADER 13W
 140G MOTOR GRADER 13W00425-00740 (MACHINE) POWERED BY 3306DI ENGINE MEBP1302 140G 13W   (1975)

HYDRAULIC SYSTEM

TANK GP
TANK & MTG GP-HYDRAULIC
2G-8220 TANK & MTG GP-HYDRAULIC
TANK & MTG GP-HYDRAULIC
2G-8220 TANK & MTG GP-HYDRAULIC
TANK & MTG GP-HYDRAULIC
2G-8220 TANK & MTG GP-HYDRAULIC
TANK GP-HYDRAULIC
6G-8020 TANK GP-HYDRAULIC
COVER GP-PROTECTION
5D-1910 COVER GP-PROTECTION
COVER GP-HYDRAULIC TANK CAP
9G-9288 COVER GP-HYDRAULIC TANK CAP
 

#MEBP13020550
 

9G-9288: COVER GP-HYDRAULIC TANK CAP

9G9288 PROTECTION COVER GROUP-HYDRAULIC TANK CAP
SERIAL NO. 13W446-UP
c228813 MEBP1302
9G9288 COVER GP-HYDRAULIC TANK CAP Parts scheme
  For full view, you need register

Parts for your 140G MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 1L-5072 [1] DOWEL  
2. 9M-7394 [1] LEVER  
3. 5D-1911 [1] COVER-HYDRAULIC CAP  
4. 2J-7761 [1] RING-RETAINING  
5. 5P-8502 [1] PADLOCK GP  
  5P-8500 A [2] KEY  
  A   NOT PART OF THIS GROUP
 

#MEBP13020551
 

7D-9600: SHAFT GP-PUMP DRIVE

7D9600 HYDRAULIC PUMP DRIVE GROUP
SERIAL NO. 13W425 TO 13W432 INCLUSIVE
7D9268 JOINT PARTS ARE SHOWN ON PAGE 182
c207384 MEBP1302
7D9600 SHAFT GP-PUMP DRIVE Parts scheme
  For full view, you need register

Parts for your 140G MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 1C-2251 [4] BOLT  
2. 7D-9268 Y [1] JOINT GROUP  
    (Separate Illustration)
3. 0S-1748 [4] BOLT  
4. 7D-9267 [1] YOKE  
5. 2L-6267 [4] LOCKNUT  
6. 1D-5120 [1] NUT  
  3B-4512 [1] LOCKWASHER  
  Y   SEPARATE ILLUSTRATION
 

#MEBP13020552
 

7D-9600: SHAFT GP-PUMP DRIVE

7D9600 DRIVE GP-PUMP
S/N 13W433-UP
6G4240-PAGE 182A
c401993 MEBP1302
7D9600 SHAFT GP-PUMP DRIVE Parts scheme
  For full view, you need register

Parts for your 140G MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 1C-2251 [4] BOLT  
2. 6G-4240 Y [1] UNIVERSAL JOINT GP  
3. 0L-0478 [4] BOLT  
4. 7D-9267 [1] YOKE  
5. 3V-2431 [8] WASHER  
6. 1D-5120 [1] NUT-JAM  
  5P-8248 [1] WASHER-HARD  
7. 1B-8737 C [1] KEY-WOODRUFF  
  C   CHANGE FROM PREVIOUS TYPE
  Y   SEPARATE ILLUSTRATION
 

#MEBP13020553
 

8D-7900: LINES GP-PUMP

8D7900 PUMP LINES GROUP-PART 1 OF 3
SERIAL NO. 13W425 TO 13W445 INCLUSIVE
c227980 MEBP1302
8D7900 LINES GP-PUMP Parts scheme
  For full view, you need register

Parts for your 140G MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7K-4975 [2] HOSE 5 IN EACH  
2. 5P-2230 [4] CLAMP  
3. 8D-6774 [1] TUBE ASSEM.  
4. 030-7935 [1] CONNECTOR  
  7M-8485 [1] SEAL  
5. 0S-1594 C [4] BOLT  
6. 3B-4506 [6] LOCKWASHER  
7. 8D-6811 [1] PLATE  
8. 3B-1915 [3] BOLT  
  0L-1319 [3] WASHER  
  1P-7115 [3] GROMMET ASSEM.  
9. 005-4362 [1] ELBOW  
10. 3K-0360 [4] SEAL  
11. 2R-6276 [2] CONNECTOR  
12. 3D-2824 [6] SEAL  
13. 8M-0505 [1] CONNECTOR  
14. 030-7950 [1] ELBOW  
15. 8D-0407 [2] TUBE ASSEM.  
16. 030-7943 [2] ELBOW  
17. 9D-0884 [1] CONNECTOR  
18. 030-7936 [1] CONNECTOR  
19. 3J-1907 [2] SEAL  
20. 030-7944 C [2] ELBOW  
21. 2R-6806 [1] CONNECTOR  
22. 9D-5903 [1] HOSE ASSEM. (not serv)  
    For service furnish:
  2P-5943 CH HOSE 27.95 in.(71 cm)  
  8S-6417 [1] COUPLING ASSEM. (straight)  
  8S-6392 [1] COUPLING ASSEM. (90degrees)  
  4S-5414 [2] SLEEVE  
23. 6K-3607 [1] CONNECTOR  
24. 9D-5992 [1] HOSE ASSEM. (not serv)  
    For service furnish:
  2P-5943 CH HOSE 21.65 in. (55 cm)  
  8S-6417 [1] COUPLING ASSEM. (straight)  
  4S-5414 [2] SLEEVE  
  1P-9919 [1] COUPLING ASSEM. (45degrees)  
25. 4B-4278 [3] WASHER  
26. 9D-6227 C [1] HOSE ASSEM. (not serv)  
    For service furnish:
  2P-5943 CH HOSE 26.78 in. (68 cm)  
  8S-6417 [2] COUPLING ASSEM.  
  4S-5414 [2] SLEEVE  
27. 9D-6274 [1] HOSE ASSEM. (not serv)  
    For service furnish:
  9S-0671 H HOSE 13.40 in. (34 cm)  
  8S-6391 [1] COUPLING ASSEM. (90degrees)  
  3S-8606 [2] SLEEVE  
  8S-4055 [1] COUPLING ASSEM. (straight)  
28. 8D-9918 [1] PLATE ASSEM.  
    (Includes)
29. 9F-2978 [2] NUT  
30. 9D-5911 [1] HOSE ASSEM. (not serv)  
    For service furnish:
  9S-0671 H HOSE 24.01 in. (61 cm)  
  8S-6391 [1] COUPLING ASSEM. (90degrees)  
  3S-8606 [2] SLEEVE  
  8S-4055 [1] COUPLING ASSEM. (straight)  
31. 2M-9780 [1] SEAL  
32. 061-9258 [1] TEE  
  030-3978 [1] CONNECTOR  
  3J-7354 [1] SEAL  
33. 6G-1694 C [1] HOSE ASSEM. (not serv)  
34. 6G-1693 C [1] HOSE ASSEM. (not serv)  
    For service of each furnish:
  9S-0247 H HOSE 30.3 in. (77 cm)  
  8S-3759 [2] COUPLING ASSEM. (straight)  
  3S-7166 [2] SLEEVE  
35. 9L-1566 C [1] SUPPORT  
  4S-4455 C [1] CLIP  
  1D-4717 C [1] NUT  
  5P-1075 C [1] WASHER  
36. 6G-3099 C [1] BUSHING  
  4B-4285 C [1] WASHER  
  3B-7329 C [1] NUT  
  2F-7964 C [1] SEAL  
  C   INDICATES CHANGE
  H   ORDER BY THE INCH
 

#MEBP13020554
 

8D-7900: LINES GP-PUMP

8D7900 PUMP LINES GROUP-PART 2 OF 3
SERIAL NO. 13W425 TO 13W445 INCLUSIVE
9J3469 VALVE PARTS ARE SHOWN ON PAGE 187
c227981 MEBP1302
8D7900 LINES GP-PUMP Parts scheme
  For full view, you need register

Parts for your 140G MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 6K-3607 [2] CONNECTOR  
  2M-9780 [2] SEAL  
2. 4S-1962 [9] CLIP  
3. 9D-5872 [1] HOSE ASSEM. (not serv)  
    For service furnish:
  9S-0671 CH HOSE 170.9 in. (434 cm)  
  8S-4055 [1] COUPLING ASSEM. (straight)  
  8S-6391 [1] COUPLING ASSEM. (90degrees)  
  3S-8606 [2] SLEEVE  
4. 8M-0505 [2] CONNECTOR  
  3K-0360 [2] SEAL  
5. 4S-6797 [1] CONNECTOR  
  2S-4078 [1] SEAL  
6. 9D-5993 [1] HOSE ASSEM. (not serv)  
    For service furnish:
  8S-9355 CH HOSE 14.57 in. (37 cm)  
  8S-3918 [1] COUPLING ASSEM. (straight)  
  1P-9589 [1] COUPLING ASSEM. (90degrees)  
  3S-7252 [2] SLEEVE  
7. 9D-5994 [1] HOSE ASSEM.  
    (Includes)
  8S-9355 CH HOSE 24.72 in. (62.8 cm)  
8. 3S-7252 [2] SLEEVE  
9. 8K-5114 [1] COUPLING ASSEM. (90degrees)  
10. 7S-0574 [1] STEM ASSEM. (60degrees)  
11. 030-7945 [1] ELBOW  
12. 7M-8485 [2] SEAL  
13. 030-7935 [1] CONNECTOR  
14. 0T-0319 [3] BOLT  
  2H-3920 [3] LOCKWASHER  
  8D-7185 [3] WASHER  
  8D-0983 [3] MOUNTING  
15. 9D-6361 [1] PLATE ASSEM.  
16. 9J-3469 CY [1] VALVE GROUP  
    (Separate Illustration)
17. 9D-9284 [1] PIN (large)  
  4J-5325 [1] PIN (small)  
  3B-4607 [1] COTTER PIN  
18. 9D-5990 [1] HOSE ASSEM. (not serv)  
    For service furnish:
  9S-0671 CH HOSE 153.93 in. (391 cm)  
  8S-4055 [1] COUPLING ASSEM. (straight)  
  8S-6391 [1] COUPLING ASSEM. (90degrees)  
  3S-8606 [2] SLEEVE  
19. 0T-0772 [4] BOLT  
  4D-6433 [4] WASHER  
20. 1P-4578 [2] FLANGE  
21. 4J-0522 [1] SEAL  
22. 0T-0102 [1] BOLT  
  3B-4506 [1] LOCKWASHER  
  C   INDICATES CHANGE
  Y   SEPARATE ILLUSTRATION
  H   ORDER BY THE INCH
 

#MEBP13020555
 

8D-7900: LINES GP-PUMP

8D7900 PUMP LINES GROUP-PART 3 OF 3
SERIAL NO. 13W425 TO 13W445 INCLUSIVE
8J2011 VALVE PARTS ARE SHOWN ON PAGE 187
c227982 MEBP1302
8D7900 LINES GP-PUMP Parts scheme
  For full view, you need register

Parts for your 140G MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8J-2011 Y [1] VALVE GROUP  
    (Separate Illustration)
  3B-1915 [3] BOLT  
  0L-1319 [6] WASHER  
  1P-7115 [3] GROMMET ASSEM.  
2. 3B-4506 [5] LOCKWASHER  
3. 0T-0573 [2] BOLT  
4. 030-7942 [1] ELBOW  
5. 3J-1907 [3] SEAL  
6. 2R-6276 [2] CONNECTOR  
7. 3D-2824 [5] SEAL  
8. 5P-5059 [1] FLANGE  
  8F-6711 [1] SEAL  
9. 9D-5992 [1] HOSE ASSEM. (not serv)  
    For service furnish:
  2P-5943 CH HOSE 21.65 in. (55 cm)  
  8S-6417 [1] COUPLING ASSEM. (straight)  
  [1] COUPLING ASSEM. (45degrees)  
  4S-5414 [2] SLEEVE  
10. 030-8188 [2] CONNECTOR  
11. 9D-8557 C [2] HOSE ASSEM. (not serv)  
    For service of each furnish:
  9S-0247 H HOSE 21.65 in. (55 cm)  
  8S-3759 [1] COUPLING ASSEM. (straight)  
  3S-7166 [2] SLEEVE  
  9S-9726 [1] COUPLING ASSEM. (45degrees)  
12. 9D-5904 [1] HOSE ASSEM. (not serv)  
    For service furnish:
  2P-5943 CH HOSE 36.22 in. (92 cm)  
  8S-6417 [1] COUPLING ASSEM. (straight)  
  8S-6392 [1] COUPLING ASSEM. (90degrees)  
  4S-5414 [2] SLEEVE  
13. 3K-0360 C [6] SEAL  
14. 9D-6669 [1] BLOCK  
15. 9S-4185 C [2] PLUG  
16. 9S-8008 [1] PLUG  
17. 0S-1585 [4] BOLT  
18. 2R-6806 C [1] CONNECTOR  
19. 8D-0087 [1] STEM  
20. 8D-6775 [1] TUBE ASSEM.  
21. 8D-8866 [1] TUBE ASSEM.  
22. 0S-1587 [4] BOLT  
23. 5P-5061 C [1] FLANGE  
  5H-8848 [1] SEAL  
24. 030-7935 [1] CONNECTOR  
  7M-8485 [1] SEAL  
25. 5P-1293 J HOSE 17.78 cm (7 in.)  
26. 005-4362 C [2] ELBOW  
27. 5P-0597 [2] CLAMP  
28. 9D-5988 [1] HOSE ASSEM. (not serv)  
    For service furnish:
  2P-5943 CH HOSE 11.41 in. (29 cm)  
  8S-6417 [2] COUPLING ASSEM.  
  4S-5414 [2] SLEEVE  
29. 030-7944 [1] ELBOW  
30. 9D-0884 [1] CONNECTOR  
31. 030-7936 [1] CONNECTOR  
  C   INDICATES CHANGE
  Y   SEPARATE ILLUSTRATION
  J   ORDER BY THE CENTIMETER
  H   ORDER BY THE INCH
 

#MEBP13020556
 

8D-7900: LINES GP-PUMP

8D7900 LINES GP-PUMP-PART 1 OF 3
S/N 13W446-685
c180271 MEBP1302
8D7900 LINES GP-PUMP Parts scheme
  For full view, you need register

Parts for your 140G MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7K-4975 [2] HOSE  
2. 5P-2230 [4] CLAMP  
3. 8D-6774 [1] TUBE ASSEM.  
4. 030-7935 [1] CONNECTOR  
  7M-8485 [1] SEAL  
5. 0S-1594 C [3] BOLT  
6. 5M-2894 C [3] WASHER  
7. 8D-6811 [1] PLATE  
8. 3B-1915 C [2] BOLT  
  0L-1319 [3] WASHER  
  1P-7115 [3] GROMMET ASSEM.  
9. 005-4362 [1] ELBOW  
10. 3K-0360 [4] SEAL  
11. 2R-6276 [2] CONNECTOR  
12. 3D-2824 [6] SEAL  
13. 8M-0505 C [2] CONNECTOR  
14. 030-7950 [1] ELBOW  
15. 8D-0407 [2] TUBE ASSEM.  
16. 030-7943 C [1] ELBOW  
17. 9D-0884 [1] CONNECTOR  
18. 030-7936 [1] CONNECTOR  
19. 3J-1907 [2] SEAL  
20. 030-7944 [2] ELBOW  
21. 2R-6806 [1] CONNECTOR  
22. 9D-5903 [1] HOSE ASSEM. (not serv)  
    For service furnish:
  2P-5943 H HOSE 27.95 in.(71 cm)  
  8S-6417 [1] COUPLING ASSEM. (straight)  
  8S-6392 [1] COUPLING ASSEM. (90 degrees)  
  4S-5414 [2] SLEEVE  
23. 6K-3607 [1] CONNECTOR  
24. 9D-5992 [1] HOSE ASSEM. (not serv)  
    For service furnish:
  2P-5943 H HOSE 21.65 in. (55 cm)  
  8S-6417 [1] COUPLING ASSEM. (straight)  
  4S-5414 [2] SLEEVE  
  1P-9919 [1] COUPLING ASSEM. (45 degrees)  
25. 5P-1075 C [4] WASHER  
26. 6G-8012 C [1] HOSE ASSEM.  
    For Service Furnish:
  2P-5943 H HOSE 29.14 in.(74 cm)  
  8S-6417 [1] COUPLING ASSEM. (straight)  
  1P-9919 [1] COUPLING ASSEM. (45 degrees)  
  4S-5414 [2] SLEEVE  
27. 9D-6274 [1] HOSE ASSEM. (Not serviced)  
    For Service Furnish:
  9S-0671 H HOSE 13.40 in.(34 cm)  
  8S-6391 [1] COUPLING ASSEM. (90 degrees)  
  3S-8606 [2] SLEEVE  
  8S-4055 [1] COUPLING AS SEM. (straight)  
28. 8D-9918 [1] PLATE ASSEM.  
29. 9F-2978 [2] NUT  
30. 2M-9780 [1] SEAL  
31. 3M-0496 C [1] STUD  
32. 9D-5911 [1] HOSE ASSEM. (Not serviced)  
    For Service Furnish:
  9S-0671 H HOSE 24.01 in.)(61 cm)  
  8S-6391 [1] COUPLING ASSEM. (90 degrees)  
  3S-8606 [2] SLEEVE  
  8S-4055 [1] COUPLING ASSEM. (straight)  
33. 061-9258 [1] TEE  
  030-3978 [1] CONNECTOR  
  3J-7354 [1] SEAL  
34. 6G-1694 [1] HOSE ASSEM. (Not serviced)  
35. 6G-1693 [1] HOSE ASSEM. (Not serviced)  
    For Service of Each Furnish:
  9S-0247 H HOSE 30.3 in.(77 cm)  
  8S-3759 [2] COUPLING ASSEM. (straight)  
  3S-7166 [2] SLEEVE  
36. 9L-1566 [1] SUPPORT  
  4S-4455 [1] CLIP  
37. 1D-4717 C [2] NUT  
38. 6G-3099 [1] BUSHING  
  4B-4285 C [2] WASHER  
  3B-7329 [1] NUT  
  2F-7964 [1] SEAL  
39. 0S-1590 C [1] BOLT  
  6G-2263 C [1] SPACER  
  C   INDICATES CHANGE
  H   ORDER BY THE INCH
 

#MEBP13020557
 

8D-7900: LINES GP-PUMP

8D7900 LINES GP-PUMP-PART 2 OF 3
S/N 13W446-685
9J3469-PAGE 187
c233117 MEBP1302
8D7900 LINES GP-PUMP Parts scheme
  For full view, you need register

Parts for your 140G MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 6K-3607 [2] CONNECTOR  
  2M-9780 [2] SEAL  
2. 4S-1962 [9] CLIP  
3. 9D-5872 [1] HOSE ASSEM. (not serv)  
    For service furnish:
  9S-0671 H HOSE 170.9 in. (434 cm)  
  8S-4055 [1] COUPLING ASSEM. (straight)  
  8S-6391 [1] COUPLING ASSEM. (90 degrees)  
  3S-8606 [2] SLEEVE  
4. 8M-0505 [2] CONNECTOR  
  3K-0360 [2] SEAL  
5. 4S-6797 [1] CONNECTOR  
  2S-4078 [1] SEAL  
6. 9D-5993 [1] HOSE ASSEM. (not serv)  
    For service furnish:
  8S-9355 H HOSE 14.57 in. (37 cm)  
  8S-3918 [1] COUPLING ASSEM. (straight)  
  1P-9589 [1] COUPLING ASSEM. (90 degrees)  
  3S-7252 [2] SLEEVE  
7. 9D-5994 [1] HOSE ASSEM.  
    (Includes)
  8S-9355 H HOSE 24.72 in. (62.8 cm)  
8. 3S-7252 [2] SLEEVE  
9. 8K-5114 [1] COUPLING ASSEM. (90 degrees)  
10. 7S-0574 [1] STEM ASSEM. (60 degrees)  
11. 030-7945 [1] ELBOW  
12. 7M-8485 [2] SEAL  
13. 030-7935 [1] CONNECTOR  
14. 0T-0319 [3] BOLT  
  2H-3920 [3] LOCKWASHER  
  8D-7185 [3] WASHER  
  8D-0983 [3] MOUNTING  
15. 9D-6361 [1] PLATE ASSEM.  
16. 9J-3469 Y [1] VALVE GROUP  
    (Separate Illustration)
17. 9D-9284 [1] PIN (large)  
  4J-5325 [1] PIN (small)  
  3B-4607 [1] COTTER PIN  
18. 9D-5990 [1] HOSE ASSEM. (not serv)  
    For service furnish:
  9S-0671 H HOSE 153.93 in. (391 cm)  
  8S-4055 [1] COUPLING ASSEM. (straight)  
  8S-6391 [1] COUPLING ASSEM. (90 degrees)  
  3S-8606 [2] SLEEVE  
19. 0T-0772 [4] BOLT  
  4D-6433 [4] WASHER  
20. 1P-4578 [2] FLANGE  
21. 4J-0522 [1] SEAL  
22. 0T-0102 [1] BOLT  
  3B-4506 [1] LOCKWASHER  
  H   ORDER BY THE INCH
  Y   SEPARATE ILLUSTRATION
 

#MEBP13020558
 

8D-7900: LINES GP-PUMP

8D7900 LINES GP-PUMP-PART 3 OF 3
S/N 13W446-685
8J2011-PAGE 187
c180272 MEBP1302
8D7900 LINES GP-PUMP Parts scheme
  For full view, you need register

Parts for your 140G MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8J-2011 Y [1] VALVE GROUP  
    (Separate Illustration)
  3B-1915 [3] BOLT  
  0L-1319 [6] WASHER  
  1P-7115 [3] GROMMET ASSEM.  
2. 3B-4506 [5] LOCKWASHER  
3. 0T-0573 [2] BOLT  
4. 030-7942 [1] ELBOW  
5. 3J-1907 [3] SEAL  
6. 2R-6276 [2] CONNECTOR  
7. 3D-2824 [5] SEAL  
8. 5P-5059 [1] FLANGE  
  8F-6711 [1] SEAL  
9. 9D-5992 [1] HOSE ASSEM. (not serv)  
    For service furnish:
  2P-5943 H HOSE 21.65 in. (55 cm)  
  8S-6417 [1] COUPLING ASSEM. (straight)  
  [1] COUPLING ASSEM. (45 degrees)  
  4S-5414 [2] SLEEVE  
10. 030-8188 [2] CONNECTOR  
11. 9D-8557 [2] HOSE ASSEM. (not serv)  
    For service of each furnish:
  9S-0247 H HOSE 21.65 in. (55 cm)  
  8S-3759 [1] COUPLING ASSEM. (straight)  
  3S-7166 [2] SLEEVE  
  9S-9726 [1] COUPLING ASSEM. (45 degrees)  
12. 9D-5904 [1] HOSE ASSEM. (not serv)  
    For service furnish:
  2P-5943 H HOSE 36.22 in. (92 cm)  
  8S-6417 [1] COUPLING ASSEM. (straight)  
  8S-6392 [1] COUPLING ASSEM. (90 degrees)  
  4S-5414 [2] SLEEVE  
13. 3K-0360 [6] SEAL  
14. 9D-6669 [1] BLOCK  
15. 9S-4185 [2] PLUG  
16. 9S-8008 [1] PLUG  
17. 0S-1585 [4] BOLT  
18. 2R-6806 [1] CONNECTOR  
19. 8D-0087 [1] STEM  
20. 8D-6775 [1] TUBE ASSEM.  
21. 8D-8866 [1] TUBE ASSEM.  
22. 0S-1587 [4] BOLT  
23. 5P-5061 [1] FLANGE  
  5H-8848 [1] SEAL  
24. 030-7935 [1] CONNECTOR  
  7M-8485 [1] SEAL  
25. 5P-1293 J HOSE 17.78 cm (7 in.)  
26. 005-4362 [2] ELBOW  
27. 5P-4868 C [2] CLAMP  
28. 9D-5988 [1] HOSE ASSEM. (not serv)  
    For service furnish:
  2P-5943 H HOSE 11.41 in. (29 cm)  
  8S-6417 [2] COUPLING ASSEM.  
  4S-5414 [2] SLEEVE  
29. 030-7944 [1] ELBOW  
30. 9D-0884 [1] CONNECTOR  
31. 030-7936 [1] CONNECTOR  
  C   INDICATES CHANGE
  Y   SEPARATE ILLUSTRATION
  J   ORDER BY THE CENTIMETER
  H   ORDER BY THE INCH
 

#MEBP13020559
 

8W-0226: LINES GP-PUMP

8W0226 LINES GP-PUMP-PART 1 OF 3
S/N 13W686-UP
9J3469-PAGE 187
c400641 MEBP1302
8W0226 LINES GP-PUMP Parts scheme
  For full view, you need register

Parts for your 140G MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 6V-8638 [2] CONNECTOR-SEAL  
  2M-9780 [2] SEAL-O-RING 19.1MM(.75IN.)O.D.  
2. 1S-0994 [9] CLIP  
3. 8W-0231 [1] HOSE AS  
4. 6V-8639 [2] CONNECTOR  
  3K-0360 [2] SEAL-O-RING 16.3MM(.64IN.)O.D.  
5. 6V-9875 [1] CONNECTOR  
  2S-4078 [1] SEAL-O-RING  
6. 8W-0236 [1] HOSE AS  
7. 5T-9908 [1] HOSE AS  
8. 5K-9090 [3] SEAL 23.5MM(.925IN.)O.D.  
9. 6V-8398 [4] SEAL-0-RING 12.4MM(.48IN.)O.D.  
10. 0T-0102 [1] BOLT  
  5M-2894 [1] WASHER  
11. 6V-9005 [1] ELBOW-45 DEGREE  
12. 7M-8485 [2] SEAL-O-RING  
13. 6V-8635 [1] CONNECTOR-SEAL  
14. 0T-0319 [3] BOLT  
  5P-8244 [3] WASHER (SMALL)  
  8D-7185 [3] WASHER (LARGE)  
  8D-0983 [3] MOUNTING  
15. 9D-6361 [1] PLATE AS  
16. 9J-3469 Y [1] VALVE GP-RELIEF & COMBINER (COMBINATION)  
17. 9D-9284 [1] PIN (LARGE)  
  4J-5325 [1] PIN (SMALL)  
  3B-4607 [1] COTTER  
18. 8W-0230 [1] HOSE AS  
19. 0T-0772 [4] BOLT  
  4D-6433 [4] WASHER-HARD  
20. 1P-4578 [2] FLANGE  
21. 4F-7952 [1] SEAL-O-RING  
  Y   SEPARATE ILLUSTRATION
 

Information:

Tool Operating Manual
204-7392 (Air Motor Driven) Filter Cart {0645, 0680, 0738, 5056, 5068}
204-7392 (Air Motor Driven) Filter Cart {0645, 0680, 0738, 5056, 5068}
Procedures for Using 9U-5971 and 173-9842 Filter Cart Group {0599, 0738, 5050, 5056, 5057, 5068, 5095, 7579}
Procedures for Using 9U-5971 and 173-9842 Filter Cart Group {0599, 0738, 5050, 5056, 5057, 5068, 5095, 7579}
Procedures For Using: 127-8781 Transfer Filter Cart , old 9U-7361 (110V, 60 hz), 169-7159 Transfer Filter Cart , old 127-8782 (220V, 50 hz) CE, 174-9158 Transfer Filter Cart , old 129-0849 (Air Motor Driven){0374, 0599, 0680, 0738}
Procedures For Using: 127-8781 Transfer Filter Cart , old 9U-7361 (110V, 60 hz), 169-7159 Transfer Filter Cart , old 127-8782 (220V, 50 hz) CE, 174-9158 Transfer Filter Cart , old 129-0849 (Air Motor Driven){0374, 0599, 0680, 0738}
Procedure for Using 173-8839 Fluid Storage Filter Cart {0113, 0374, 0599, 0680, 0738, 7579}
Procedure for Using 173-8839 Fluid Storage Filter Cart {0113, 0374, 0599, 0680, 0738, 7579}
188-3242 Filter Cart Group and 227-2479 Filter Cart Group{0374, 0599, 0680, 0738, 0768, 5050, 5056, 5095}
188-3242 Filter Cart Group and 227-2479 Filter Cart Group{0374, 0599, 0680, 0738, 0768, 5050, 5056, 5095}
Service Magazine
Single Element and Multiple Element Filter Heads are Available for Customized Systems {0738}
2004/03/29
Welding On Fuel And Hydraulic Tanks {0353, 0679, 1273, 5056, 7000}
2005/12/19
Proper Identification of Ports on 5P-0306 Vacuum Transducer {0768, 5050, 5056}
2006/01/23
Spanner Wrench is Available for Ecology Drain Valves {1302, 1353, 1372, 5076, 5613}
2006/03/20

Caterpillar Parts SIS Catalog 140G :

UNIVERSAL JOINT GP-PUMP DRIVE
6G-4240 UNIVERSAL JOINT GP-PUMP DRIVE
COVER GP-PROTECTION
5D-1910 COVER GP-PROTECTION
UNIVERSAL JOINT GROUP
7D-9268 UNIVERSAL JOINT GROUP
TANK GP-HYDRAULIC
6G-8020 TANK GP-HYDRAULIC
TANK & MTG GP-HYDRAULIC
2G-8220 TANK & MTG GP-HYDRAULIC
TANK & MTG GP-HYDRAULIC
2G-8220 TANK & MTG GP-HYDRAULIC
TANK & MTG GP-HYDRAULIC
2G-8220 TANK & MTG GP-HYDRAULIC
CYLINDER GP-RIPPER LIFT
8J-1658 CYLINDER GP-RIPPER LIFT
SHAFT GP-PUMP DRIVE
7D-9600 SHAFT GP-PUMP DRIVE
SHAFT GP-PUMP DRIVE
7D-9600 SHAFT GP-PUMP DRIVE
LINES GP-PUMP
8D-7900 LINES GP-PUMP
LINES GP-PUMP
8D-7900 LINES GP-PUMP
LINES GP-PUMP
8D-7900 LINES GP-PUMP
LINES GP-PUMP
8D-7900 LINES GP-PUMP
LINES GP-PUMP
8D-7900 LINES GP-PUMP
LINES GP-PUMP
8D-7900 LINES GP-PUMP

Truck sale:

Caterpillar 140G
 
Caterpillar 140G
- motor graders
ZIEGLER CAT
Caterpillar 140G, motor graders, Construction
68,000 
Caterpillar 140G, motor graders, Construction
- motor graders
MICHIGAN CAT
Caterpillar 140 GC, motor graders, Construction
225,000 
Caterpillar 140 GC, motor graders, Construction
- motor graders
KELLY TRACTOR CO.
Caterpillar 140 GC, motor graders, Construction
247,000 
Caterpillar 140 GC, motor graders, Construction
- motor graders
KELLY TRACTOR CO.
Caterpillar 140G, motor graders, Construction
69,000 
Caterpillar 140G, motor graders, Construction
- motor graders
ZIEGLER CAT
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.