AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

7T-1189 VALVE GP-CONTROL S/N 2FA3249-99999; 8XE1-99999 TRANSMISSION RELIEF PART OF 3P-2807 CONTROL GP-TRANSMISSION HYD FIELD REPLACEMENT ORDER @@@@@ 7T-1188@@@@@ 120G


POWER TRAIN
VALVE GP-CONTROL
VALVE GP-PILOT
VALVE GP-SELECTOR & PRESS CONT
ELECTRICAL AND STARTING SYSTEM
VALVE GP
POWER TRAIN
WHEEL GP
FRAME AND BODY
AXLE GP

MOTOR GRADER 120G MOTOR GRADER 11W
 120G Motor Grader 11W01251-UP (MACHINE) POWERED BY 3304 Engine MEBP1758 120G 11W   (1975)

POWER TRAIN

VALVE GP-CONTROL
VALVE GP-CONTROL
2P-4548 VALVE GP-CONTROL
VALVE GP-CONTROL
7T-1188 VALVE GP-CONTROL
VALVE GP-CONTROL
7T-1189 VALVE GP-CONTROL
 

#MEBP17580210
 

7T-1189: VALVE GP-CONTROL

7T-1189 VALVE GP-CONTROL
S/N 2FA3249-99999; 8XE1-99999
TRANSMISSION RELIEF
PART OF 3P-2807 CONTROL GP-TRANSMISSION HYD
FIELD REPLACEMENT ORDER @@@@@ 7T-1188@@@@@
i00143540 MEBP1758
7T1189 VALVE GP-CONTROL Parts scheme
  For full view, you need register

Parts for your 120G MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 1P-0562 [1] VALVE AS-RELIEF  
  4S-5982 [1] VALVE-RELIEF  
2. 9M-4313 [1] POPPET  
3. 8M-2537 [1] RETAINER  
4. 1L-3162 [1] RING-RETAINING  
5. 5M-9548 [1] SPRING  
6. 6F-6673 [3] SEAL-O-RING  
7. 8P-2893 [1] SPRING  
8. 7T-1186 [1] PLATE-IDENTIFICATION  
  7B-3028 [1] SCREW-DRIVE (NO 4X 3/16-IN)  
9. 2P-5677 [1] SPRING  
10. 9S-4191 C [2] PLUG (9/16-18-THD)  
  3J-1907 C [2] SEAL-O-RING  
11. 6P-4917 [2] PIN  
12. 2P-4548 Y [2] VALVE GP-CONTROL  
13. 3H-1461 [2] SEAL-O-RING  
14. 1A-2029 [10] BOLT (3/8-16X1.125-IN)  
  3B-4506 [10] LOCKWASHER  
15. 2M-1656 [5] COVER  
16. 7M-1396 B [1] SPACER (1.6-MM THK)  
  7M-1397 B [1] SPACER (3.18X19.05X0.9-MM THK)  
  5M-3492 B [4] SPACER (3.18X19.05X0.25-MM THK)  
17. 7T-1185 [1] BODY-RELIEF VALVE  
  B   USE AS REQUIRED
  C   CHANGE FROM PREVIOUS TYPE
  Y   SEPARATE ILLUSTRATION
 

#MEBP17580211
 

3P-0842: VALVE GP-PILOT

3P-0842 VALVE GP-PILOT
S/N 2FA1-99999; 8XE1-99999
PART OF 3P-0841 VALVE GP-SELECTOR & PRESS CONT
i00143310 MEBP1758
3P0842 VALVE GP-PILOT Parts scheme
  For full view, you need register

Parts for your 120G MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 2P-7030 [1] SPOOL AS-SELECTOR  
2. 2A-3746 [1] PLUG-CUP  
3. 6H-2948 [1] DOWEL  
4. 2P-4503 [1] PLUG-SPOOL  
5. 7S-4607 [2] DETENT AS  
6. 8M-8489 [2] DOWEL  
7. 2H-6265 [1] PIN-ROLL  
8. 3P-4362 [1] STOP  
  3K-0360 [1] SEAL-O-RING  
 

#MEBP17580212
 

2P-5814: VALVE GP-SELECTOR & PRESS CONT

2P-5814 VALVE GP-SELECTOR & PRESS CONT
S/N 2FA1-99999; 8XE1-99999
PART OF 3P-0841 VALVE GP-SELECTOR & PRESS CONT
i00143225 MEBP1758
2P5814 VALVE GP-SELECTOR & PRESS CONT Parts scheme
  For full view, you need register

Parts for your 120G MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 1P-9685 [1] SPOOL  
2. 5S-7906 [1] STOP  
3. 8H-5244 [1] DOWEL  
4. 2P-4529 [1] SPOOL-REDUCING  
5. 1T-0416 [4] BOLT (5/16-18X0.75-IN)  
6. 2P-5700 [1] SPRING (OUTER)  
7. 2P-5701 [1] SPRING (INNER)  
8. 2P-5803 [1] PLATE  
9. 2B-0858 C [1] PLUG-PIPE  
10. 3J-1907 C [1] SEAL-O-RING  
11. 3P-2706 [1] PLATE  
12. 4B-9782 [1] BALL  
13. 9S-4191 C [1] PLUG (9/16-18-THD)  
  C   CHANGE FROM PREVIOUS TYPE
 

#MEBP17580213
 

3P-0841: VALVE GP-SELECTOR & PRESS CONT

3P-0841 VALVE GP-SELECTOR & PRESS CONT
S/N 2FA1-99999; 8XE1-99999
PILOT SELECTOR & PRESSURE CONTROL
PART OF 3P-2807 CONTROL GP-TRANSMISSION HYD
i00143309 MEBP1758
3P0841 VALVE GP-SELECTOR & PRESS CONT Parts scheme
  For full view, you need register

Parts for your 120G MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3P-0842 Y [1] VALVE GP-PILOT  
2. 3P-0208 [8] BOLT-12 POINT HEAD (5/16-18X8-IN)  
3. 9M-1974 [16] WASHER-HARD (8.8X16X2-MM THK)  
4. 9M-4289 [4] BOLT-12 POINT HEAD (5/16-18X8-IN)  
5. 3P-0864 [1] COVER AS  
6. 5M-6214 C [1] PLUG  
7. 3P-0866 [1] POPPET  
8. 3P-0867 [1] RETAINER  
  4D-1322 [1] RING-RETAINING  
9. 3J-6956 [1] SPRING  
10. 4S-5845 [4] BOLT-12 POINT HEAD (5/16-18X8-IN)  
11. 8P-1101 Y [1] VALVE GP-SELECTOR & PRESS CONT  
12. 2P-5814 Y [1] VALVE GP-SELECTOR & PRESS CONT  
13. 3P-2870 [1] MANIFOLD AS  
14. 9M-6803 [2] DOWEL  
15. 8M-8489 [2] DOWEL  
16. 3P-0843 Y [1] VALVE GP-SELECTOR & PRESS CONT  
  C   CHANGE FROM PREVIOUS TYPE
  Y   SEPARATE ILLUSTRATION
 

#MEBP17580214
 

3P-0843: VALVE GP-SELECTOR & PRESS CONT

3P-0843 VALVE GP-SELECTOR & PRESS CONT
S/N 2FA1-99999; 8XE1-99999
PART OF 3P-0841 VALVE GP-SELECTOR & PRESS CONT
i00143311 MEBP1758
3P0843 VALVE GP-SELECTOR & PRESS CONT Parts scheme
  For full view, you need register

Parts for your 120G MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 2P-4500 [1] SPRING (OUTER)  
2. 2P-4397 [1] SPACER  
3. 2P-4499 [1] SPRING (INNER)  
4. 7M-1396 B [1] SPACER (1.6-MM THK)  
  7M-1397 B [1] SPACER (3.18X19.05X0.9-MM THK)  
  5M-3492 B [4] SPACER (3.18X19.05X0.25-MM THK)  
5. 6P-4700 C [1] SPOOL AS  
  5M-8009 [1] PIN-SPRING  
6. 1S-2121 [1] PLUNGER  
7. 4M-2381 [1] SPRING  
8. 1S-1636 [1] RETAINER  
  1S-1638 [1] RING-RETAINING  
9. 5M-2504 [1] SLUG  
10. 2P-9186 [2] WASHER  
11. 3P-1798 [1] COVER  
12. 1L-3769 [1] RING-RETAINING  
13. 6F-6673 [1] SEAL-O-RING  
14. 6L-4783 [3] BOLT-12 POINT HEAD (5/16-18X1.25-IN)  
15. 8H-5244 [1] DOWEL  
16. 5S-7906 [1] STOP  
17. 2P-4486 [2] SPOOL-SELECTOR  
18. 2P-4501 [3] SPRING  
19. 2P-4502 [1] COVER  
20. 2P-4372 [1] SPOOL-SELECTOR  
21. 3D-4245 [2] SEAL-O-RING  
22. 1T-0416 [5] BOLT (5/16-18X0.75-IN)  
23. 2P-4396 [1] PISTON-LOAD  
  B   USE AS REQUIRED
  C   CHANGE FROM PREVIOUS TYPE
 

#MEBP17580215
 

8P-1101: VALVE GP-SELECTOR & PRESS CONT

8P-1101 VALVE GP-SELECTOR & PRESS CONT
S/N 2FA1-99999; 8XE1-99999
PART OF 3P-0841 VALVE GP-SELECTOR & PRESS CONT
i00143636 MEBP1758
8P1101 VALVE GP-SELECTOR & PRESS CONT Parts scheme
  For full view, you need register

Parts for your 120G MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3P-8042 [1] SPRING  
2. 3T-2542 C [1] SLEEVE  
3. 3P-0812 [1] SPRING (OUTER)  
  2P-4547 [1] SPRING (INNER)  
4. 8P-1096 [1] PISTON-MODULATING  
5. 2M-1168 [1] SLUG-VALVE  
6. 3S-9951 [1] WASHER (0.656X1.25X0.062-IN THK)  
7. 3P-6669 [1] SPRING  
8. 8H-5244 [2] DOWEL  
9. 3T-2543 C [1] SPOOL-MODULATION  
10. 3P-7834 [1] STOP AS  
  2P-4484 [1] STOP  
11. 4B-9880 [1] BALL  
12. 2P-4506 [1] PLUG  
  2H-3932 [1] SEAL-O-RING  
13. 2P-4507 [1] COVER  
14. 1T-0416 [7] BOLT (5/16-18X0.75-IN)  
15. 5M-6214 C [2] PLUG  
16. 3S-9949 [1] SPRING  
17. 5S-7906 [1] STOP  
18. 2P-4486 [2] SPOOL-SELECTOR  
19. 2P-4501 [2] SPRING  
20. 2P-4504 [1] COVER  
21. 3D-4245 [1] SEAL-O-RING  
22. 1P-0561 [1] SPOOL-DIFFERENTIAL  
23. 8P-1098 [1] BODY AS-VALVE  
24. 6P-3223 [8] DAMPER-BOLT (28.44MM LG)  
25. 8M-8489 [4] DOWEL  
26. 3H-1118 [1] PIN-SPRING  
  C   CHANGE FROM PREVIOUS TYPE
 

#MEBP17580216
 

9W-0706: VALVE GP-SOLENOID

9W-0706 VALVE GP-SOLENOID
S/N 11W1251-99999
PART OF 7T-9073 VALVE & MTG GP-DIFF LOCK
i00124929 MEBP1758
9W0706 VALVE GP-SOLENOID Parts scheme
  For full view, you need register

Parts for your 120G MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 6G-5978 [1] CARTRIDGE-VALVE  
2. 2D-6235 [1] LOCKNUT (1/4-20-THD)  
  4B-4276 [1] WASHER (7X16X1.6-MM THK)  
3. 6T-8500 [1] COIL AS  
4. 1S-9593 [2] STRAP-CABLE  
5. 7N-7779 [1] SOCKET-CONNECTOR (14-GA TO 18-GA)  
6. 7N-9737 [1] HOUSING-RECEPTACLE (14-GA TO 18-GA)  
7. 7N-7780 [1] PIN-CONNECTOR (14-GA TO 18-GA)  
    THE FOLLOWING REPAIR KIT IS AVAILABLE:
  6G-5979 [1] KIT-SEAL  
    (INCLUDES 3 O-RINGS)
 

#MEBP17580217
 

5T-8234: WHEEL GP

5T-8234 WHEEL GP
S/N 11W1251-99999
8.00 X 24.00
PART OF 2C-8044 POWER TRAIN AR
i00143405 MEBP1758
5T8234 WHEEL GP Parts scheme
  For full view, you need register

Parts for your 120G MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 2G-6595 [6] VALVE GP-TIRE  
    (EACH INCLUDES)
2. 2D-2507 [1] SPUD  
  2D-2509 [1] LOCKNUT (11/16-16-THD)  
  2D-2508 [1] GROMMET  
3. 9K-7951 [1] CAP-VALVE (STEM)  
4. 6F-3930 [1] CORE-VALVE  
5. 2D-2565 [6] SEAL-O-RING  
6. 2D-2566 [6] RING-LOCK  
7. 2H-3757 [60] BOLT (7/8-9X1.75-IN)  
  4M-6953 [60] WASHER-HARD (24X38X3.5-MM THK)  
8. 8W-9587 [6] FLANGE AS  
9. 2G-5744 [6] WHEEL  
 

#MEBP17580218
 

5T-8235: WHEEL GP

5T-8235 WHEEL GP
S/N 11W1251-99999
13.00 X 24 TIRE SIZE/14.00 X 24 TIRE SIZE
AN ATTACHMENT
i00143406 MEBP1758
5T8235 WHEEL GP Parts scheme
  For full view, you need register

Parts for your 120G MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 2G-5745 [6] RIM AS  
2. 2D-2655 [6] FLANGE  
3. 2D-2565 [6] SEAL-O-RING  
4. 2D-2654 [6] RING-LOCK  
5. 0S-1973 [60] BOLT (7/8-9X2-IN)  
  4M-6953 [60] WASHER-HARD (24X38X3.5-MM THK)  
6. 2G-6595 [6] VALVE GP-TIRE  
    (EACH INCLUDES)
7. 2D-2507 [1] SPUD  
8. 2D-2509 [1] LOCKNUT (11/16-16-THD)  
  2D-2508 [1] GROMMET  
9. 9K-7951 C [1] CAP-VALVE (STEM)  
  6F-3930 C [1] CORE-VALVE  
  C   CHANGE FROM PREVIOUS TYPE
 

#MEBP17580219
 

5T-8142: AXLE GP-FRONT

5T-8142 AXLE GP-FRONT
S/N 11W1251-1261
PART OF 2C-8562 CHASSIS AR
i00143404 MEBP1758
5T8142 AXLE GP-FRONT Parts scheme 5T8142 AXLE GP-FRONT Parts scheme
  For full view, you need register

Parts for your 120G MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 2G-5667 [2] RETAINER  
2. 2G-8616 [1] PIN  
3. 5P-8842 [10] SEAL-LIP TYPE  
4. 0S-1592 [2] BOLT (5/8-11X1.25-IN)  
  4D-3704 [2] WASHER-HARD (17X30X5-MM THK)  
5. 2G-8719 [1] AXLE AS-FRONT  
6. 2G-8661 [2] BUSHING  
7. 2G-8631 [4] BUSHING  
8. 1B-5174 [2] PLUG-PIPE  
9. 2G-5676 B [1] WASHER (1.781X4X0.06-IN THK)(1.52MM .060IN THK)  
10. 0T-0065 [2] BOLT (3/8-16X3.5-IN)  
  2K-4973 [2] LOCKNUT (3/8-16-THD)  
11. 2G-8628 [1] PIN  
12. 2G-8685 [1] BAR AS  
13. 2G-8624 [2] BUSHING  
14. 2G-8612 [1] PIN  
15. 2G-8687 [1] ARM AS  
16. 2G-8737 [1] BUSHING (6.45CM)  
  2G-8736 [1] BUSHING (6.05CM)  
17. 2G-8681 [1] HOUSING-SPINDLE (RH)  
18. 2G-8769 [1] PIN  
19. 8D-2811 [2] WASHER (1.25X1.94X0.032-IN THK)  
  3B-4618 [2] PIN-COTTER  
20. 5P-1075 C [8] WASHER-HARD (10.2X22.5X3-MM THK)(SMALL)  
21. 7D-8912 Y [1] LINK GP-STEERING  
22. 3B-8489 [12] FITTING-GREASE (1/8-27 PTF)  
23. 5S-7379 C [4] BOLT (3/8-16X0.875-IN)  
  2G-8768 [4] WASHER (10.5X53.8X3-MM THK)(LARGE)  
24. 2G-8633 [2] PIN  
25. 2G-5675 [2] WASHER (1.78X4X0.19-IN THK)(4.78MM .188IN THK)  
26. 2G-8682 [1] HOUSING-SPINDLE (LH)  
27. 5S-7383 C [4] BOLT (3/8-16X1.75-IN)  
28. 2G-3866 B [2] SHIM  
29. 9D-0052 [2] RETAINER  
30. 030-8535 [4] BOLT-LOCKING (3/8-16X0.875-IN)  
31. 2G-8778 [4] SEAL  
  4L-9564 [4] SEAL-O-RING  
32. 5H-1504 [2] WASHER-HARD (20X33.5X5-MM THK)  
33. 5P-8081 [4] BOLT-LOCKING (3/4-16X2-IN)  
34. 2G-8742 [2] WASHER-HARD (20X65X5-MM THK)  
35. 1B-4367 [2] BOLT (5/8-11X3-IN)  
  4K-0367 [2] NUT-FULL (5/8-11-THD)  
  4D-3704 [2] WASHER-HARD (17X30X5-MM THK)  
36. 4D-0925 [2] LOCK  
37. 5P-8888 [2] SEAL-LIP TYPE  
38. 9D-0055 [2] LOCK  
39. 2G-8688 [1] ARM AS  
  2G-8737 [1] BUSHING  
40. 2G-8736 [1] BUSHING  
41. 1D-4608 [2] BOLT (3/4-10X2.75-IN)  
  2J-3506 [2] NUT-FULL (3/4-10-THD)  
  2S-0115 [2] WASHER-HARD (20X36.5X5-MM THK)  
42. 5T-0905 [2] COVER  
43. 2H-3928 [2] SEAL-O-RING  
44. 2P-8986 [2] CUP-BEARING  
  2P-8987 [2] CONE-BEARING  
45. 0L-1329 [6] BOLT (1/2-13X3-IN)  
46. 5T-8141 [2] SPINDLE-FRONT AXLE  
47. 2N-2138 [2] CUP-BEARING  
  2N-2139 [2] CONE-BEARING  
48. 2G-8764 [4] RETAINER  
  2G-8760 [4] RING-METAL SEAL  
49. 3S-0303 [2] SEAL GP-DUO-CONE  
    (EACH INCLUDES)
  3S-0302 [2] RING-SEALING  
50. 2G-8664 [4] WASHER-THRUST (OUTER)  
  2G-8665 [2] WASHER-THRUST (INNER)  
51. 2G-8620 [4] PIN  
  B   USE AS REQUIRED
  C   CHANGE FROM PREVIOUS TYPE
  Y   SEPARATE ILLUSTRATION
 

Information:

Caterpillar Parts SIS Catalog 120G :

VALVE GP-CONTROL
7T-1188 VALVE GP-CONTROL
VALVE GP-CONTROL
2P-4548 VALVE GP-CONTROL
7T-9073 VALVE & MTG GP-DIFF LOCK
8P-5957 TRANSMISSION AR
8E-5332 TRANSMISSION AR
9D-6096 TIRE GP
9D-6095 TIRE GP
TIRE & RIM GP
2G-6037 TIRE & RIM GP
VALVE GP-PILOT
3P-0842 VALVE GP-PILOT
VALVE GP-SELECTOR & PRESS CONT
2P-5814 VALVE GP-SELECTOR & PRESS CONT
VALVE GP-SELECTOR & PRESS CONT
3P-0841 VALVE GP-SELECTOR & PRESS CONT
VALVE GP-SELECTOR & PRESS CONT
3P-0843 VALVE GP-SELECTOR & PRESS CONT
VALVE GP-SELECTOR & PRESS CONT
8P-1101 VALVE GP-SELECTOR & PRESS CONT
VALVE GP-SOLENOID
9W-0706 VALVE GP-SOLENOID
WHEEL GP
5T-8234 WHEEL GP
WHEEL GP
5T-8235 WHEEL GP

Truck sale:

Caterpillar 120G
 
Caterpillar 120G
- motor graders
HOLT CAT
 
40,000 
Caterpillar 120G, motor graders, Construction
- motor graders
ALTORFER INC.
Caterpillar H120GCS.CW40S, hammer, Construction
18,210 
Caterpillar H120GCS.CW40S, hammer, Construction
- hammer
BERGERAT MONNOYEUR S.A.S.
Caterpillar 120G, motor graders, Construction
32,000 
Caterpillar 120G, motor graders, Construction
- motor graders
FOLEY EQUIPMENT COMPANY
 
33,500 
Caterpillar HH120GCS, hammer, Construction


Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.