FRAME AND BODY
AXLE GPBOX GP-BATTERY
BUMPER GP
CASE & FRAME GP
DOOR GP
FRAME GP
GUARD GP
HITCH GP
HOOD GP
FRAME AND BODY
AXLE GP
#MEBP17580220
8W-6465: AXLE GP-FRONT
For full view, you need register
Parts for your 120G MOTOR GRADER:
| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 2G-5667 | [2] | RETAINER | |
| 2. | 2G-8633 | [2] | PIN | |
| 3. | 5P-8842 | [12] | SEAL-LIP TYPE | |
| 4. | 0S-1592 | [2] | BOLT (5/8-11X1.25-IN) | |
| 4D-3704 | [2] | WASHER-HARD (17X30X5-MM THK) | ||
| 5. | 8W-6462 | [1] | AXLE AS-FRONT | |
| 8W-6463 | [1] | AXLE AS | ||
| 8W-6466 | [2] | END-AXLE | ||
| 8W-6467 | [1] | BRACKET | ||
| 8W-6468 | [1] | BRACKET | ||
| 8W-6469 | [1] | BRACKET | ||
| 8W-6470 | [2] | ROD | ||
| [1] | BRACKET-ROD | |||
| 6. | 2G-8661 | [2] | BUSHING | |
| 7. | 2G-8631 | [4] | BUSHING | |
| 8. | 7X-7731 | [2] | PLUG-PIPE (3/4-14-THD) | |
| 9. | 2G-5676 | [2] | WASHER (1.781X4X0.06-IN THK) | |
| 10. | 0T-0065 | [2] | BOLT (3/8-16X3.5-IN) | |
| 2K-4973 | [2] | LOCKNUT (3/8-16-THD) | ||
| 11. | 2G-8628 | [1] | PIN | |
| 12. | 2G-8599 | [1] | BAR AS | |
| 8D-2993 | [2] | END-TIE BAR | ||
| 13. | 2G-8624 | [2] | BUSHING | |
| 14. | 8W-4652 | [1] | HOUSING-SPINDLE | |
| 15. | 8X-3435 | [1] | ARM AS-LEANING | |
| 8X-3437 | [1] | ARM-FRONT AXLE | ||
| 16. | 2G-7387 | [1] | BUSHING (5.95 CM LG) | |
| 2G-7388 | [1] | BUSHING (6.39 CM LG) | ||
| 8W-6497 | [1] | PIN | ||
| 17. | 8W-4653 | [1] | HOUSING-SPINDLE | |
| 18. | 2G-8769 | [1] | PIN | |
| 19. | 2G-5675 | [2] | WASHER (1.78X4X0.19-IN THK) | |
| 20. | 5P-1075 | [4] | WASHER-HARD (10.2X22.5X3-MM THK) | |
| 21. | 7D-8912 Y | [1] | LINK GP-STEERING | |
| 22. | 3B-8489 | [12] | FITTING-GREASE (1/8-27 PTF) | |
| 23. | 5S-7379 | [4] | BOLT (3/8-16X0.875-IN) | |
| 2G-8768 | [4] | WASHER (10.5X53.8X3-MM THK) | ||
| 24. | 2G-3865 B | [2] | SHIM (0.127-MM THK) | |
| 25. | 7D-8643 | [2] | RETAINER | |
| 26. | 5D-0353 | [4] | BOLT-LOCKING (3/8-16X1-IN) | |
| 27. | 2G-8777 | [4] | SEAL | |
| 9M-2092 | [4] | SEAL-O-RING | ||
| 28. | 8W-5293 | [4] | PIN | |
| 29. | 2H-3740 | [4] | BOLT (3/4-16X1.25-IN) | |
| 30. | 2G-8742 | [2] | WASHER-HARD (20X65X5-MM THK) | |
| 31. | 8D-2811 | [2] | WASHER (1.25X1.94X0.032-IN THK) | |
| 32. | 3B-4618 | [2] | PIN-COTTER | |
| 33. | 5P-8890 | [2] | SEAL-LIP TYPE | |
| 34. | 9D-9797 | [2] | LOCK | |
| 35. | 8X-3434 | [1] | ARM AS-LEANING | |
| 8X-3436 | [1] | ARM-FRONT AXLE | ||
| 36. | 2G-7387 | [1] | BUSHING (5.95 CM LG) | |
| 2G-7388 | [1] | BUSHING (6.39 CM LG) | ||
| 8W-6476 | [1] | PIN | ||
| 37. | 1D-4628 | [2] | BOLT (7/8-9X3.25-IN) | |
| 2J-3505 | [2] | NUT-FULL (7/8-9-THD) | ||
| 9H-1031 | [2] | WASHER-HARD (24X41.5X6-MM THK) | ||
| 38. | 5T-0906 | [2] | COVER | |
| 39. | 2J-8163 | [2] | SEAL-O-RING | |
| 40. | 7D-8637 | [2] | CUP-BEARING | |
| 7D-8636 | [2] | CONE-BEARING | ||
| 41. | 0V-0375 | [6] | BOLT (1/2-13X3.25-IN) | |
| 42. | 8W-8610 | [2] | SPINDLE-FRONT AXLE | |
| 43. | 030-0060 | [2] | CUP-BEARING | |
| 030-0061 | [2] | CONE-BEARING | ||
| 44. | 2G-8741 | [4] | RING-METAL SEAL | |
| 45. | 9W-6645 | [2] | SEAL GP-DUO-CONE | |
| (EACH INCLUDES) | ||||
| 5K-5129 | [2] | RING-SEALING | ||
| 46. | 2G-8615 | [4] | WASHER-THRUST (2.015X3.625X0.11-IN THK) | |
| 2G-8626 | [2] | WASHER-THRUST (2.02X3.63X0.16-IN THK) | ||
| B | USE AS REQUIRED | |||
| Y | SEPARATE ILLUSTRATION | |||
#MEBP17580221
8W-4404: BOX GP-BATTERY
For full view, you need register
Parts for your 120G MOTOR GRADER:
| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 5T-1456 | [1] | BRACKET AS | |
| 2. | 8W-4242 | [1] | BOX AS | |
| 8S-4212 | [2] | RIVET | ||
| 6F-9571 | [1] | SPACER | ||
| 9F-6595 | [1] | CATCH | ||
| 3. | 8W-4247 | [1] | COVER AS | |
| 4B-4310 | [2] | RIVET | ||
| 9F-6596 | [1] | HOOK | ||
| 4. | 0S-1595 | [6] | BOLT (1/2-13X1.25-IN) | |
| 5P-1076 | [6] | WASHER-HARD (13.5X30X4-MM THK) | ||
| 5. | 5T-1475 | [1] | BRACKET AS | |
| 6. | 0S-1566 | [2] | BOLT (5/8-11X1.5-IN) | |
| 5P-8247 | [2] | WASHER-HARD (17X32X3.5-MM THK) |
#MEBP17580222
2G-4510: BUMPER GP-REAR
For full view, you need register
#MEBP17580223
2G-4800: CASE & FRAME GP
For full view, you need register
Parts for your 120G MOTOR GRADER:
| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 5T-5478 C | [1] | CASE & FRAME AS | |
| 2. | 8D-3508 C | [6] | BOSS (3/8-16X1-IN) | |
| 3. | 5F-7845 | [1] | BOSS (50.8-MM LG) | |
| 4. | 8F-9836 C | [2] | BOSS (3/8-16-THD) | |
| 5. | 6M-7939 C | [4] | LUG | |
| 6. | 9K-3050 C | [2] | STUD-WELD | |
| 7. | 7T-1099 C | [2] | LINK | |
| 8. | 4D-8148 | [1] | DOWEL | |
| 9. | 6B-5262 | [1] | PLUG | |
| 2A-3398 | [1] | GASKET | ||
| 10. | 2D-8822 | [40] | STUD-TAPERLOCK (5/8-11X2.36-IN) | |
| 11. | 5M-1932 | [11] | STUD-TAPERLOCK (1/2-13X2.17-IN) | |
| C | CHANGE FROM PREVIOUS TYPE | |||
#MEBP17580224
2C-8645: DOOR GP-ACCESS
For full view, you need register
Parts for your 120G MOTOR GRADER:
| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 2C-8955 | [1] | DOOR AS (LH) | |
| 2C-8956 | [1] | DOOR AS (RH) | ||
| (EACH INCLUDES) | ||||
| 2. | 9V-0453 | [1] | BUSHING-TERMINAL | |
| 3. | 8G-0871 | [1] | HANDLE | |
| 4. | 2C-8618 | [1] | PLATE (RH) | |
| 5. | 2C-8656 | [2] | BRACKET AS | |
| 6. | 2C-8657 | [2] | STRIKER | |
| 7. | 3K-8107 | [4] | GROMMET | |
| 8. | 2K-4973 | [2] | LOCKNUT (3/8-16-THD) | |
| 9. | 2C-8948 | [4] | STUD | |
| 10. | 5P-4116 | [4] | WASHER-HARD (8.8X20.5X2-MM THK) | |
| 11. | 5C-7261 M | [4] | NUT (M8X1.25-THD) | |
| 12. | 2C-8747 | [2] | PIN | |
| 13. | 2V-9166 | [2] | WASHER (0.391X1X0.06-IN THK) | |
| 14. | 3B-4609 | [2] | PIN-COTTER | |
| 15. | 8G-0873 | [2] | SPRING | |
| 16. | 7P-7975 | [2] | LATCH | |
| 17. | 9V-0450 | [2] | PIN | |
| 18. | 5P-8502 | [3] | PADLOCK GP | |
| (EACH INCLUDES) | ||||
| 5P-8500 A | [2] | KEY | ||
| 8Y-6364 A | [1] | SLEEVE | ||
| 19. | 2C-8638 | [6] | BUMPER | |
| 20. | 2C-8651 | [4] | BUMPER | |
| 21. | 8L-7395 | [9] | NUT-FULL | |
| 22. | 5P-1075 | [10] | WASHER-HARD (10.2X22.5X3-MM THK) | |
| 23. | 4L-6454 | [16] | BOLT (3/8-16X1-IN) | |
| 24. | 2C-8957 | [2] | ROD | |
| 25. | 2C-8679 | [4] | PLATE | |
| 26. | 8T-4896 | [17] | WASHER-HARD (10.2X18.5X2.5-MM THK) | |
| 27. | 2C-8619 | [1] | PLATE (LH) | |
| 28. | 8W-2668 | [2] | PLATE | |
| 29. | 8W-2669 | [2] | STRIP | |
| 30. | 9D-6494 | [1] | PLATE AS | |
| 31. | 1S-1014 | [1] | GROMMET | |
| 32. | 8W-2671 | [1] | COVER AS | |
| 33. | 9M-5732 | [15] | RIVET-POP | |
| 34. | 8W-2670 | [1] | STRIP | |
| A | NOT PART OF THIS GROUP | |||
| M | METRIC PART | |||
#MEBP17580225
8W-2327: FRAME GP-FRONT
For full view, you need register
Parts for your 120G MOTOR GRADER:
| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 9D-9257 | [1] | PIN (LARGE) | |
| 2. | 8D-3791 | [1] | PIN (SMALL) | |
| 3. | 6G-2526 | [1] | PLATE | |
| 4. | 3K-5574 | [2] | SCREW-HOLLOW | |
| 5. | 9D-0178 | [4] | BEARING | |
| 6. | 9D-6584 | [8] | SEAL-LIP TYPE | |
| 7. | 5M-3062 | [13] | BOLT (3/8-16X0.75-IN) | |
| 8. | 7K-4743 | [9] | SPACER (10.31X25.4X6.35-MM THK)(LARGE) | |
| 9. | 8T-4896 | [17] | WASHER-HARD (10.2X18.5X2.5-MM THK) | |
| 10. | 8W-5768 | [1] | COVER (RH) | |
| 11. | 8W-5769 | [1] | COVER (LH) | |
| 12. | 4L-6454 | [8] | BOLT (3/8-16X1-IN) | |
| 13. | 8W-2824 | [2] | COVER | |
| 14. | 9D-4784 | [5] | BUSHING-TERMINAL | |
| 15. | 5P-1075 | [4] | WASHER-HARD (10.2X22.5X3-MM THK) | |
| 16. | 8X-7011 | [1] | PLATE | |
| 17. | 8X-7012 | [1] | PAD | |
| 18. | 8X-6984 | [1] | FRAME AS-PLATFORM & SEAT | |
| 19. | 8F-9836 | [1] | BOSS (3/8-16-THD) | |
| 20. | 6J-0499 | [4] | LUG (1/2-13-THD) | |
| 21. | 9G-0028 | [1] | BOSS AS (3/8-16X0.62-IN) | |
| 4K-2543 | [1] | BOSS (3/8-16-THD) | ||
| 8S-1783 | [1] | PLATE-GROUNDING | ||
| 22. | 4K-8479 | [4] | STUD-WELD (3/8-16X1.25-IN) | |
| 23. | 9D-5657 | [6] | BOSS | |
| 24. | 9D-5567 | [15] | BOSS (3/8-16X2.44-IN) | |
| 25. | 9D-5659 | [16] | BOSS (3/8-16X1.19-IN) | |
| 26. | 2G-5611 | [2] | PIPE | |
| 27. | 8G-0452 | [2] | LUG (3/8-16-THD) | |
| 28. | 9F-6445 | [7] | NUT-WELD (1/4-20-THD) | |
| 29. | 6G-0256 | [1] | BRACKET | |
| 30. | 8D-7349 | [2] | PLATE | |
| 31. | 8D-8879 | [4] | STUD (3/8-16X3.38-IN) | |
| 32. | 4D-9376 | [5] | BOSS (3/8-16-THD) | |
| 33. | 8D-7353 | [2] | PLATE | |
| 34. | 2G-7908 | [2] | PLATE | |
| 35. | 8W-0681 | [1] | PLATE | |
| 36. | 8T-5911 | [12] | NUT-WELD (1/2-13-THD) | |
| 37. | 9D-5572 | [1] | BOSS (3/8-16-THD) | |
| 38. | 9D-6166 | [16] | BOSS (3/8-16-THD) | |
| 39. | 9D-5571 | [1] | BOSS (3/8-16-THD) | |
| 40. | 6K-2188 | [2] | PIN | |
| 41. | 8T-5912 | [23] | NUT-WELD (3/8-16-THD) | |
| 42. | 8X-6949 | [1] | PLATE | |
| 43. | 8W-0682 | [1] | PLATE |
#MEBP17580226
8D-5160: GUARD & SUPPORT GP-RADIATOR
8D-5160 GUARD & SUPPORT GP-RADIATOR
S/N 11W1251-99999
PART OF 2C-8562 CHASSIS AR
S/N 11W1251-99999
PART OF 2C-8562 CHASSIS AR
For full view, you need register
Parts for your 120G MOTOR GRADER:
| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 6G-3690 | [1] | SUPPORT AS | |
| 8D-7023 C | [2] | HANDHOLD | ||
| 9D-1942 C | [2] | LUG | ||
| 2. | 8D-1220 C | [2] | BRACKET AS | |
| 3. | 9D-2209 C | [1] | PLATE | |
| 4. | 5S-7379 C | [4] | BOLT (3/8-16X0.875-IN) | |
| 5. | 5P-1075 C | [27] | WASHER-HARD (10.2X22.5X3-MM THK) | |
| 6. | 8D-3501 | [1] | SCREEN AS | |
| 8D-0611 C | [1] | HINGE | ||
| 7. | 8D-3502 | [1] | SCREEN AS | |
| 8D-0611 | [1] | HINGE | ||
| 8. | 6G-3691 | [1] | PLATE | |
| 9. | 5M-3062 | [14] | BOLT (3/8-16X0.75-IN) | |
| 10. | 5C-6565 | [10] | BOLT (1/2-13X1.125-IN) | |
| 7X-0550 | [10] | WASHER-HARD (13.5X32X5-MM THK) | ||
| 11. | 0S-0509 | [9] | BOLT (3/8-16X0.75-IN) | |
| C | CHANGE FROM PREVIOUS TYPE | |||
#MEBP17580227
8W-5870: GUARD GP-DRIVE SHAFT
For full view, you need register
Parts for your 120G MOTOR GRADER:
#MEBP17580228
8D-9780: HITCH GP-ARTICULATING
For full view, you need register
Parts for your 120G MOTOR GRADER:
| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 1A-1460 | [4] | BOLT (1/2-13X2-IN) | |
| 2. | 5P-8245 C | [22] | WASHER-HARD (13.5X25.5X3-MM THK) | |
| 3. | 0S-1587 | [2] | BOLT (1/2-13X1.75-IN) | |
| 4. | 5B-9916 C | [1] | FITTING-HYDRAULIC | |
| 5. | 6G-0417 C | [1] | COVER | |
| 6. | 2G-4011 C | [1] | COLLAR | |
| 7. | 5K-0984 | [1] | BUSHING | |
| 8. | 6G-0607 C | [1] | PIN | |
| 9. | 6K-4186 | [2] | SEAL-LIP TYPE | |
| 10. | 2G-6157 C | [1] | PIN | |
| 11. | 6K-4185 | [1] | SPACER-SPECIAL | |
| 12. | 6K-4191 | [1] | CAP-UPPER | |
| 13. | 2D-4867 | [1] | FITTING-GREASE (1/8-27 PTF) | |
| 14. | 8D-9689 B | [1] | SHIM PACK (INCLUDES 24-SHIMS) | |
| 15. | 8D-9909 | [1] | BEARING AS-ROLLER | |
| 16. | 6K-4190 | [1] | CAP-LOWER | |
| 17. | 2B-2006 | [6] | BOLT (1/2-13X4.75-IN) | |
| 18. | 7B-3235 | [10] | BOLT (1/2-13X1.375-IN) | |
| 19. | 6K-4193 | [1] | PLATE-LOCK | |
| 20. | 3B-4510 | [4] | LOCKWASHER | |
| 21. | 8D-9688 | [1] | SPACER | |
| 22. | 6K-4187 B | [1] | SHIM PACK (INCLUDES 19-SHIMS) | |
| 23. | 4K-7463 | [2] | SEAL-LIP TYPE | |
| 24. | 4K-8659 | [1] | BUSHING | |
| B | USE AS REQUIRED | |||
| C | CHANGE FROM PREVIOUS TYPE | |||
#MEBP17580229
2G-4460: HOOD GP
For full view, you need register
Parts for your 120G MOTOR GRADER:
| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 6G-6982 C | [1] | HOOD AS | |
| 2. | 0T-0537 | [4] | FASTENER AS-HOOD | |
| 3. | 2D-9335 | [4] | PLATE | |
| 8T-9082 | [12] | RIVET-POP | ||
| 4. | 7K-1400 | [4] | HANDRAIL | |
| 5. | 5T-3439 | [1] | PLATE AS-DASH | |
| 5D-6013 | [2] | LUG (.5" ROUND) | ||
| 9D-1942 | [2] | LUG (FLAT) | ||
| 9F-2978 | [13] | NUT-WELD (3/8-16-THD) | ||
| 6. | 8T-8917 C | [2] | BOLT (1/2-13X1.25-IN) | |
| 7. | 7D-9533 | [1] | BRACE | |
| 8. | 6V-8188 | [1] | NUT (1/2-13-THD) | |
| 9. | 8T-4835 C | [2] | BOLT (1/2-13X2-IN) | |
| 10. | 8D-3786 | [2] | MOUNTING | |
| 11. | 1A-2519 | [2] | WASHER (14X44.5X4-MM THK) | |
| 12. | 5P-1076 C | [3] | WASHER-HARD (13.5X30X4-MM THK) | |
| C | CHANGE FROM PREVIOUS TYPE | |||
