AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

9T-2393 CYLINDER GP-STEERING S/N 13W741-992 57.15 MM (2.25 IN) BORE X 267.00 MM (10.50 IN) STROKE (CHGS 00-05). RH PART OF 8W-2290 CYLINDER & MTG GP-STEERING 140G


HYDRAULIC SYSTEM
CYLINDER GP
DRIVE GP
FLOAT AR-BLADE
LEVER GP

MOTOR GRADER 140G MOTOR GRADER 13W
 140G Motor Grader 13W00741-00992 (MACHINE) POWERED BY 3306 Engine MEBP1763 140G 13W   (1975)

HYDRAULIC SYSTEM

CYLINDER GP
CYLINDER GP-SIDESHIFT
105-2094 CYLINDER GP-SIDESHIFT
CYLINDER GP-SIDESHIFT
9T-2483 CYLINDER GP-SIDESHIFT
CYLINDER GP-STEERING
9T-2393 CYLINDER GP-STEERING
CYLINDER GP-STEERING
9T-2395 CYLINDER GP-STEERING
CYLINDER GP-WHEEL LEAN
9T-2520 CYLINDER GP-WHEEL LEAN
 

#MEBP17630300
 

9T-2393: CYLINDER GP-STEERING

9T-2393 CYLINDER GP-STEERING
S/N 13W741-992
57.15 MM (2.25 IN) BORE X 267.00 MM (10.50 IN) STROKE (CHGS 00-05). RH
PART OF 8W-2290 CYLINDER & MTG GP-STEERING
i00124922 MEBP1763
9T2393 CYLINDER GP-STEERING Parts scheme
  For full view, you need register

Parts for your 140G MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 9T-2392 [1] CYLINDER AS (RH)  
  005-8639 [1] BEARING-ALIGNING  
2. 6V-5845 M [1] BOLT (M20X2.5X70-MM)  
3. 8T-3282 C [1] WASHER-HARD (22X35X3.5-MM THK)  
4. 9T-2388 [1] PISTON  
5. 1U-3998 J [1] SEAL AS  
6. 7H-2423 J [1] RING-WEAR  
7. 9T-2387 [1] ROD AS  
8. 9T-3727 [1] HEAD  
9. 8C-9122 [1] SEAL AS  
10. 5J-8150 J [1] SEAL-U-CUP  
11. 8C-9131 [1] SEAL-LIP TYPE  
12. 4J-9225 JC [1] RING-BACKUP  
13. 5H-8848 J [1] SEAL-O-RING  
14. 1N-5999 [1] PLUG-O-RING  
15. 7J-0204 [1] SEAL-O-RING  
   
    AVAILABLE REPAIR KIT(S):
  8T-6397 [1] KIT-HYD CYLINDER SEAL  
  C   CHANGE FROM PREVIOUS TYPE
  J   KITS MARKED J INCLUDE PARTS MARKED J
  M   METRIC PART
  R   REMANUFACTURED PART MAY BE AVAILABLE
 

#MEBP17630301
 

9T-2395: CYLINDER GP-STEERING

9T-2395 CYLINDER GP-STEERING
S/N 13W741-992
57.15 MM (2.25 IN) BORE X 267.00 MM (10.50 IN) STROKE (CHGS 00-05). LH
PART OF 8W-2290 CYLINDER & MTG GP-STEERING
i00124923 MEBP1763
9T2395 CYLINDER GP-STEERING Parts scheme
  For full view, you need register

Parts for your 140G MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 9T-2394 [1] CYLINDER AS (LH)  
  005-8639 [1] BEARING-ALIGNING  
2. 6V-5845 M [1] BOLT (M20X2.5X70-MM)  
3. 8T-3282 C [1] WASHER-HARD (22X35X3.5-MM THK)  
4. 9T-2388 [1] PISTON  
5. 1U-3998 J [1] SEAL AS  
6. 7H-2423 J [1] RING-WEAR  
7. 9T-2387 [1] ROD AS  
8. 9T-3727 [1] HEAD  
9. 8C-9122 [1] SEAL AS  
10. 5J-8150 J [1] SEAL-U-CUP  
11. 8C-9131 [1] SEAL-LIP TYPE  
12. 4J-9225 JC [1] RING-BACKUP  
13. 5H-8848 J [1] SEAL-O-RING  
14. 1N-5999 [2] PLUG-O-RING  
15. 7J-0204 [2] SEAL-O-RING  
   
    AVAILABLE REPAIR KIT(S):
  8T-6397 J [1] KIT-HYD CYLINDER SEAL  
  C   CHANGE FROM PREVIOUS TYPE
  J   KIT MARKED J INCLUDES PART(S) MARKED J
  M   METRIC PART
  R   REMANUFACTURED PART MAY BE AVAILABLE
 

#MEBP17630302
 

9T-2520: CYLINDER GP-WHEEL LEAN

9T-2520 CYLINDER GP-WHEEL LEAN
S/N 13W741-992
89 MM (3.50 IN) BORE X 149 MM(6 IN) STROKE
PART OF 8W-2737 CYLINDER & MTG GP-WHEEL LEAN
i00143857 MEBP1763
9T2520 CYLINDER GP-WHEEL LEAN Parts scheme
  For full view, you need register

Parts for your 140G MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 9T-2521 [1] CYLINDER AS  
  2G-8631 [1] BUSHING  
2. 6V-5845 M [1] BOLT (M20X2.5X70-MM)  
3. 8T-3282 C [1] WASHER-HARD (22X35X3.5-MM THK)  
4. 9T-2524 [1] PISTON  
5. 5J-7013 [1] SEAL AS  
6. 7J-9885 [1] RING-WEAR  
7. 4T-6780 [1] RING-WEAR  
8. 8C-9122 [1] SEAL AS  
9. 5J-8150 [1] SEAL-U-CUP  
10. 8C-9131 [1] SEAL-LIP TYPE  
11. 9T-2525 [1] ROD AS  
  2G-8631 [1] BUSHING  
12. 6E-4939 [1] HEAD  
13. 4J-9224 C [1] RING-BACKUP  
14. 2H-4145 [1] SEAL-O-RING  
15. 006-8663 [1] RING  
  C   CHANGE FROM PREVIOUS TYPE
  M   METRIC PART
  R   REMANUFACTURED PART MAY BE AVAILABLE
 

#MEBP17630303
 

110-4656: DRIVE GP-CIRCLE

110-4656 DRIVE GP-CIRCLE
S/N 13W906-992
PART OF 2C-8569 BLADE AR
i00124997 MEBP1763
1104656 DRIVE GP-CIRCLE Parts scheme 1104656 DRIVE GP-CIRCLE Parts scheme
  For full view, you need register

Parts for your 140G MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 105-3196 Y [1] MOTOR GP-GEROTOR (CIRCLE DRIVE)(CIRCLE DRIVE)  
2. 1B-4046 [2] CONE-BEARING  
3. 1B-4038 [2] CUP-BEARING  
4. 1B-5174 [1] PLUG-PIPE  
5. 9D-1142 [1] WORM-CIRCLE DRIVE  
6. 1H-7339 [1] SEAL-O-RING  
7. 9D-1491 [1] COUPLING  
8. 4H-6996 [1] PIN-SPRING  
9. 2G-6695 [1] BRACKET  
10. 7D-8983 B [10] SHIM (0.005-IN THK)  
11. 7D-8984 B [6] SHIM (0.007-IN THK)  
12. 2H-9247 [1] SEAL-O-RING  
13. 0S-1585 [4] BOLT (1/2-13X1.5-IN)  
14. 8D-7424 [1] SPACER (48X81X6-MM THK)  
15. 5K-5288 [1] SEAL GP-DUO-CONE  
16. 110-4655 [1] HOUSING AS  
  110-4652 [1] HOUSING  
16A. 2D-8154 [4] STUD-TAPERLOCK (1/2-13X2.36-IN)  
16B. 7D-3504 [4] STUD-TAPERLOCK (3/4-10X3.39-IN)  
16C. 106-7128 [1] BUSHING  
17. 8W-5092 [1] PINION-CIRCLE DRIVE  
18. 6H-1717 [5] BOLT (1/2-13X1.125-IN)  
19. 5P-8245 [12] WASHER-HARD (13.5X25.5X3-MM THK)  
20. 2B-7410 [1] PLUG-PIPE  
21. 5F-5434 [1] VALVE AS-VENT  
22. 5K-8454 [3] BOLT (1/2-13X1.12-IN)(SELF-LOCKING)  
23. 110-4654 [1] COVER AS  
23A. 106-7129 [1] BUSHING  
24. 1F-7958 [4] NUT-FULL (1/2-13-THD)  
25. 5H-4909 [1] SEAL-O-RING  
26. 8D-7423 [1] WASHER-SPECIAL (81.03X48.41X1.6MM THK)  
27. 1A-1415 [1] NUT (1-7/8-12-THD)  
28. 106-7130 [1] GEAR-WORM (36-TEETH)  
29. 9X-8887 [2] BOLT (3/4-10X3-IN)  
30. 7M-2360 [2] WASHER (19.8X41X9.5-MM THK)  
31. 8D-7425 [2] WASHER-THRUST (2.81X4.25X0.12-IN THK)  
32. 106-7131 [1] SHAFT  
33. 4F-9653 [1] SEAL-O-RING  
34. 5P-8248 [4] WASHER-HARD (20X36.5X3.5-MM THK)  
35. 2J-3506 [4] NUT-FULL (3/4-10-THD)  
36. 1L-7388 [2] RING-RETAINING  
  B   USE AS REQUIRED
  R   REMANUFACTURED PART MAY BE AVAILABLE
  Y   SEPARATE ILLUSTRATION
 

#MEBP17630304
 

5T-0570: DRIVE GP-CIRCLE

5T-0570 DRIVE GP-CIRCLE
S/N 13W741-992
Type 1
AN ATTACHMENT
i00143365 MEBP1763
5T0570 DRIVE GP-CIRCLE Parts scheme 5T0570 DRIVE GP-CIRCLE Parts scheme
  For full view, you need register

Parts for your 140G MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8J-5407 Y [1] MOTOR GP-GEROTOR (CIRCLE DRIVE)  
2. 1B-4038 [2] CUP-BEARING  
  1B-4046 [2] CONE-BEARING  
3. 1B-5174 [1] PLUG-PIPE  
4. 9D-1142 [1] WORM-CIRCLE DRIVE  
5. 5K-8454 [3] BOLT (1/2-13X1.12-IN)  
6. 5P-8245 [12] WASHER-HARD (13.5X25.5X3-MM THK)  
7. 6H-1717 [5] BOLT (1/2-13X1.125-IN)  
8. 2B-7410 [1] PLUG-PIPE  
9. 2H-9247 [1] SEAL-O-RING  
10. 7D-8983 B [10] SHIM (0.005-IN THK)  
  7D-8984 B [6] SHIM (0.007-IN THK)  
11. 4H-6996 [1] PIN-SPRING  
12. 9D-1491 [1] COUPLING  
13. 2G-6695 [1] BRACKET  
14. 1H-7339 [1] SEAL-O-RING  
15. 0S-1585 [4] BOLT (1/2-13X1.5-IN)  
16. 5F-5434 [1] VALVE AS-VENT  
17. 6G-5534 [1] COVER AS  
  6G-5537 [1] BEARING  
18. 5S-7379 C [4] BOLT (3/8-16X0.875-IN)  
  8T-4896 C [4] WASHER-HARD (10.2X18.5X2.5-MM THK)  
19. 1D-4719 [4] NUT-FULL (1/2-13-THD)  
20. 6G-1908 [1] HOUSING AS-DRIVE  
21. 2D-8154 [4] STUD-TAPERLOCK (1/2-13X2.36-IN)  
22. 8D-7426 [1] BUSHING  
23. 4D-7246 [4] STUD-TAPERLOCK  
24. 6G-6122 [1] SPRING-DISC  
25. 6G-5547 [1] PLATE  
26. 6G-5538 [1] COVER  
27. 6G-5539 [1] GASKET  
28. 5H-4909 [1] SEAL-O-RING  
29. 6G-5542 [2] SPACER (119.2X178X9.3-MM THK)  
30. 6G-5533 [1] GEAR-WORM (36-TEETH)  
31. 1D-4609 [2] BOLT (3/4-10X3-IN)  
  7M-2360 [2] WASHER (19.8X41X9.5-MM THK)  
32. 5K-5288 [1] SEAL GP-DUO-CONE  
33. 5K-5129 [2] RING-SEALING  
34. 8D-7425 [2] WASHER-THRUST (2.81X4.25X0.12-IN THK)  
35. 6G-5532 [1] SHAFT-DRIVE PINION  
36. 1A-1415 [1] NUT (1-7/8-12-THD)  
  8D-7423 [1] WASHER-SPECIAL (81.03X48.41X1.6MM THK)  
  8D-7424 [1] SPACER (48X81X6-MM THK)  
37. 2J-3506 C [4] NUT-FULL (3/4-10-THD)  
38. 5P-8248 [4] WASHER-HARD (20X36.5X3.5-MM THK)  
39. 4F-9653 [1] SEAL-O-RING  
40. 8W-5092 C [1] PINION-CIRCLE DRIVE  
41. 6G-5548 [1] SPACER (69.5X89X0.8-MM THK)  
42. 5P-8245 [7] WASHER-HARD (13.5X25.5X3-MM THK)  
43. 0S-1585 [3] BOLT (1/2-13X1.5-IN)  
44. 2G-0475 [6] DISC (2.87MM .112IN THK)  
  2G-0478 [5] PLATE-CLUTCH (1.52MM .060IN THK)  
45. 6G-5543 B [6] SHIM (0.13-MM THK)  
  6G-5544 B [9] SHIM (0.25-MM THK)  
  B   USE AS REQUIRED
  C   CHANGE FROM PREVIOUS TYPE
  R   REMANUFACTURED PART MAY BE AVAILABLE
  Y   SEPARATE ILLUSTRATION
 

#MEBP17630305
 

5T-0570: DRIVE GP-CIRCLE

5T-0570 DRIVE GP-CIRCLE
S/N 13W741-992
Type 2
AN ATTACHMENT
i00143366 MEBP1763
5T0570 DRIVE GP-CIRCLE Parts scheme 5T0570 DRIVE GP-CIRCLE Parts scheme
  For full view, you need register

Parts for your 140G MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 9T-5976 CY [1] MOTOR GP-GEROTOR  
2. 1B-4038 [2] CUP-BEARING  
  1B-4046 [2] CONE-BEARING  
3. 1B-5174 [1] PLUG-PIPE  
4. 9D-1142 [1] WORM-CIRCLE DRIVE  
5. 5K-8454 [3] BOLT (1/2-13X1.12-IN)  
6. 5P-8245 [12] WASHER-HARD (13.5X25.5X3-MM THK)  
7. 6H-1717 [5] BOLT (1/2-13X1.125-IN)  
8. 2B-7410 [1] PLUG-PIPE  
9. 2H-9247 [1] SEAL-O-RING  
10. 7D-8983 B [10] SHIM (0.005-IN THK)  
  7D-8984 B [6] SHIM (0.007-IN THK)  
11. 4H-6996 [1] PIN-SPRING  
12. 9D-1491 [1] COUPLING  
13. 2G-6695 [1] BRACKET  
14. 1H-7339 [1] SEAL-O-RING  
15. 0S-1585 [4] BOLT (1/2-13X1.5-IN)  
16. 5F-5434 [1] VALVE AS-VENT  
17. 6G-5534 [1] COVER AS  
  6G-5537 [1] BEARING  
18. 5S-7379 [4] BOLT (3/8-16X0.875-IN)  
  8T-4896 [4] WASHER-HARD (10.2X18.5X2.5-MM THK)  
19. 1D-4719 [4] NUT-FULL (1/2-13-THD)  
20. 6G-1908 [1] HOUSING AS-DRIVE  
21. 2D-8154 [4] STUD-TAPERLOCK (1/2-13X2.36-IN)  
22. 8D-7426 [1] BUSHING  
23. 4D-7246 [4] STUD-TAPERLOCK  
24. 6G-6122 [1] SPRING-DISC  
25. 6G-5547 [1] PLATE  
26. 6G-5538 [1] COVER  
27. 6G-5539 [1] GASKET  
28. 5H-4909 [1] SEAL-O-RING  
29. 6G-5542 [2] SPACER (119.2X178X9.3-MM THK)  
30. 6G-5533 [1] GEAR-WORM (36-TEETH)  
31. 1D-4609 [2] BOLT (3/4-10X3-IN)  
  7M-2360 [2] WASHER (19.8X41X9.5-MM THK)  
32. 9W-6645 C [1] SEAL GP-DUO-CONE  
33. 5K-5129 [2] RING-SEALING  
34. 8D-7425 [2] WASHER-THRUST (2.81X4.25X0.12-IN THK)  
35. 6G-5532 [1] SHAFT-DRIVE PINION  
36. 1A-1415 [1] NUT (1-7/8-12-THD)  
  8D-7423 [1] WASHER-SPECIAL (81.03X48.41X1.6MM THK)  
  8D-7424 [1] SPACER (48X81X6-MM THK)  
37. 2J-3506 [4] NUT-FULL (3/4-10-THD)  
38. 5P-8248 [4] WASHER-HARD (20X36.5X3.5-MM THK)  
39. 4F-9653 [1] SEAL-O-RING  
40. 8W-5092 [1] PINION-CIRCLE DRIVE  
41. 6G-5548 [1] SPACER (69.5X89X0.8-MM THK)  
42. 5P-8245 [7] WASHER-HARD (13.5X25.5X3-MM THK)  
43. 0S-1585 [3] BOLT (1/2-13X1.5-IN)  
44. 6Y-7953 [6] DISC-FRICTION (2.87MM .112IN THK)  
  2G-0478 [5] PLATE-CLUTCH (1.52MM .060IN THK)  
45. 6G-5543 B [6] SHIM (0.13-MM THK)  
  6G-5544 B [9] SHIM (0.25-MM THK)  
  B   USE AS REQUIRED
  C   CHANGE FROM PREVIOUS TYPE
  Y   SEPARATE ILLUSTRATION
 

#MEBP17630306
 

6G-1925: DRIVE GP-CIRCLE

6G-1925 DRIVE GP-CIRCLE
S/N 13W741-992
PART OF 2C-8569 BLADE AR
i00143414 MEBP1763
6G1925 DRIVE GP-CIRCLE Parts scheme 6G1925 DRIVE GP-CIRCLE Parts scheme
  For full view, you need register

Parts for your 140G MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8J-5407 Y [1] MOTOR GP-GEROTOR  
2. 1B-4038 [2] CUP-BEARING  
  1B-4046 [2] CONE-BEARING  
3. 1B-5174 [1] PLUG-PIPE  
4. 9D-1142 [1] WORM-CIRCLE DRIVE  
5. 5K-8454 [3] BOLT (1/2-13X1.12-IN)  
6. 3B-4508 [12] LOCKWASHER  
7. 6H-1717 [5] BOLT (1/2-13X1.125-IN)  
8. 2B-7410 [1] PLUG-PIPE  
9. 2H-9247 [1] SEAL-O-RING  
10. 7D-8983 [10] SHIM (0.005-IN THK)  
  7D-8984 [6] SHIM (0.007-IN THK)  
11. 4H-6996 [1] PIN-SPRING  
12. 9D-1491 [1] COUPLING  
13. 2G-6695 [1] BRACKET  
14. 1H-7339 [1] SEAL-O-RING  
15. 0S-1585 [4] BOLT (1/2-13X1.5-IN)  
16. 1D-4719 [4] NUT-FULL (1/2-13-THD)  
  3B-4508 [4] LOCKWASHER  
17. 6G-1908 [1] HOUSING AS-DRIVE  
  8D-9804 [1] HOUSING-DRIVE  
18. 2D-8154 [4] STUD-TAPERLOCK (1/2-13X2.36-IN)  
19. 8D-7426 [1] BUSHING  
20. 4D-7246 [4] STUD-TAPERLOCK  
21. 6G-5051 [1] PINION-CIRCLE REVERSE  
22. 5F-5434 [1] VALVE AS-VENT  
23. 8D-7174 [1] COVER AS  
24. 8D-7173 [1] BUSHING  
25. 5H-4909 [1] SEAL-O-RING  
26. 0S-1625 [9] BOLT (5/8-11X2.5-IN)  
  3K-2889 [9] LOCKNUT (5/8-11-THD)  
  2S-5658 [9] WASHER-HARD (17X29X3-MM THK)  
27. 8D-5344 [1] GEAR-WORM (36-TEETH)  
28. 1D-4609 [2] BOLT (3/4-10X3-IN)  
  7M-2360 [2] WASHER (19.8X41X9.5-MM THK)  
29. 5K-5288 [1] SEAL GP-DUO-CONE  
30. 5K-5129 [2] RING-SEALING  
31. 8D-7425 [2] WASHER-THRUST (2.81X4.25X0.12-IN THK)  
32. 8D-7427 [1] SHAFT-DRIVE PINION  
33. 1A-1415 [1] NUT (1-7/8-12-THD)  
  8D-7423 [1] WASHER-SPECIAL (81.03X48.41X1.6MM THK)  
  8D-7424 [1] SPACER (48X81X6-MM THK)  
34. 1K-6870 [4] LOCKNUT (3/4-10-THD)  
35. 5P-6652 [4] WASHER (20X44.5X6-MM THK)  
36. 4F-9653 [1] SEAL-O-RING  
  R   REMANUFACTURED PART MAY BE AVAILABLE
  Y   SEPARATE ILLUSTRATION
 

#MEBP17630307
 

6G-1925: DRIVE GP-CIRCLE

6G-1925 DRIVE GP-CIRCLE
S/N 13W741-905
PART OF 2C-8569 BLADE AR
i00143415 MEBP1763
6G1925 DRIVE GP-CIRCLE Parts scheme
  For full view, you need register

Parts for your 140G MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 9T-5976 CY [1] MOTOR GP-GEROTOR  
2. 1B-4046 [2] CONE-BEARING  
3. 1B-4038 [2] CUP-BEARING  
4. 1B-5174 [1] PLUG-PIPE  
5. 9D-1142 [1] WORM-CIRCLE DRIVE  
6. 1H-7339 [1] SEAL-O-RING  
7. 9D-1491 [1] COUPLING  
8. 4H-6996 [1] PIN-SPRING  
9. 2G-6695 [1] BRACKET  
10. 7D-8983 B [10] SHIM (0.005-IN THK)  
11. 7D-8984 B [6] SHIM (0.007-IN THK)  
12. 2H-9247 [1] SEAL-O-RING  
13. 0S-1585 [4] BOLT (1/2-13X1.5-IN)  
14. 2K-4821 [9] LOCKNUT (5/8-18-THD)  
15. 5K-5288 [1] SEAL GP-DUO-CONE  
15A. 5K-5129 [2] RING-SEALING  
16. 6G-1908 [1] HOUSING AS-DRIVE  
16A. 8D-7426 [1] BUSHING  
  2D-8154 [4] STUD-TAPERLOCK (1/2-13X2.36-IN)  
  7D-3504 [4] STUD-TAPERLOCK (3/4-10X3.39-IN)  
  8D-9804 [1] HOUSING-DRIVE  
17. 261-8553 [1] PINION-CIRCLE DRIVE  
18. 6H-1717 [5] BOLT (1/2-13X1.125-IN)  
19. 5P-8245 [16] WASHER-HARD (13.5X25.5X3-MM THK)  
20. 2B-7410 [1] PLUG-PIPE  
21. 5F-5434 [1] VALVE AS-VENT  
22. 5K-8454 [3] BOLT (1/2-13X1.12-IN)  
23. 8D-7174 [1] COVER AS  
23A. 8D-7173 [1] BUSHING  
24. 1F-7958 [4] NUT-FULL (1/2-13-THD)  
25. 5H-4909 [1] SEAL-O-RING  
26. 5B-6891 [9] BOLT-SPECIAL  
27. 2S-5658 [9] WASHER-HARD (17X29X3-MM THK)  
28. 8D-5344 [1] GEAR-WORM (36-TEETH)  
29. 9X-8887 [2] BOLT (3/4-10X3-IN)  
30. 7M-2360 [2] WASHER (19.8X41X9.5-MM THK)  
31. 8D-7425 [2] WASHER-THRUST (2.81X4.25X0.12-IN THK)  
32. 8D-7427 [1] SHAFT-DRIVE PINION  
33. 4F-9653 [1] SEAL-O-RING  
34. 5P-8248 [4] WASHER-HARD (20X36.5X3.5-MM THK)  
35. 2J-3506 [4] NUT-FULL (3/4-10-THD)  
36. 8D-7424 [1] SPACER (48X81X6-MM THK)  
37. 8D-7423 [1] WASHER-SPECIAL (81.03X48.41X1.6MM THK)  
38. 1A-1415 [1] NUT (1-7/8-12-THD)  
  B   USE AS REQUIRED
  C   CHANGE FROM PREVIOUS TYPE
  R   REMANUFACTURED PART MAY BE AVAILABLE
  Y   SEPARATE ILLUSTRATION
 

#MEBP17630308
 

8W-2408: FLOAT AR-BLADE

8W-2408 FLOAT AR-BLADE
S/N 13W741-992
AN ATTACHMENT
i00143744 MEBP1763
  For full view, you need register

Parts for your 140G MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  8W-2371 Y [1] LINES GP-HYDRAULIC  
  8W-2014 Y [1] WIRING GP-FLOAT CONTROL  
  Y   SEPARATE ILLUSTRATION
 

#MEBP17630309
 

1U-4661: LEVER GP

1U-4661 LEVER GP
S/N 13W741-992
PART OF 8J-5903, 8J-5906, 8J-5907, 8J-5961 VALVE GP-CONTROL
AN ATTACHMENT
i00143094 MEBP1763
1U4661 LEVER GP Parts scheme
  For full view, you need register

Parts for your 140G MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8J-1616 [1] LEVER  
2. 8J-1621 [1] SCREW  
3. 8J-1622 [1] NUT (7/8-20-THD)  
4. 8J-1623 [1] BOOT  
5. 8J-1620 [2] BEARING  
6. 7F-8607 [1] SEAL-O-RING  
  8J-6264 [1] RING  
7. 1U-3389 [1] HOUSING  
8. 3D-4245 [1] SEAL-O-RING  
 

Information:

Special Instruction
Installation of Vented Buffer Seal Assembly, U-Cup Seal, and Double Lip Wiper Seal for Hydraulic Cylinders{7562}
Installation of Vented Buffer Seal Assembly, U-Cup Seal, and Double Lip Wiper Seal for Hydraulic Cylinders{7562}
Installation of Double Lip Wiper Seal{7562}
Installation of Double Lip Wiper Seal{7562}
Installation of Double Lip Wiper Seal{7562}
Installation of Double Lip Wiper Seal{7562}
Technical Information Bulletin
Surface Finishes of Cylinder Bores{7562}
Surface Finishes of Cylinder Bores{7562}
Color Change for Cylinder Rod Seals (Wiper, U-Cup and Buffer){5100, 7555, 7562}
Color Change for Cylinder Rod Seals (Wiper, U-Cup and Buffer){5100, 7555, 7562}
Tool Operating Manual
Procedures for Using the 232-4686 Cylinder Washer Tank Group European Union Compliant{0374, 0599, 0680, 0738}
Procedures for Using the 232-4686 Cylinder Washer Tank Group European Union Compliant{0374, 0599, 0680, 0738}
1U-9001 and 1U-9002 Automatic Hone Tooling{0599, 0677, 0738, 7562, 7562}
1U-9001 and 1U-9002 Automatic Hone Tooling{0599, 0677, 0738, 7562, 7562}
Model HCS-40 Hydraulic Cylinder Servicer{0374, 0599, 0700, 0738, 7562}
Model HCS-40 Hydraulic Cylinder Servicer{0374, 0599, 0700, 0738, 7562}
4C-9910 Portable Hydraulic Tester (Flow 125 GPM) {0599, 0784, 5050, 5057, 5095}
4C-9910 Portable Hydraulic Tester (Flow 125 GPM) {0599, 0784, 5050, 5057, 5095}
Using the 265-4177, 265-4209 Service Tool Groups to Install Sensors in Position-Sensing Hydraulic Cylinders{0599, 0709, 0738, 1439, 7562, 7562}
Using the 265-4177, 265-4209 Service Tool Groups to Install Sensors in Position-Sensing Hydraulic Cylinders{0599, 0709, 0738, 1439, 7562, 7562}
Using the 9U-7868 and 9U-7869 Spanner Wrench to Remove and install Threaded Gland Cylinder Heads{0374, 0599, 0602, 0738}
Using the 9U-7868 and 9U-7869 Spanner Wrench to Remove and install Threaded Gland Cylinder Heads{0374, 0599, 0602, 0738}
Procedures for Using the 120-9143 Cylinder Washer Tank Group {0374, 0602, 0680, 0738}
Procedures for Using the 120-9143 Cylinder Washer Tank Group {0374, 0602, 0680, 0738}
Reuse And Salvage Guidelines
HVOF Identification and Polishing (Superfinishing){0674, 0679, 1000, 7000, 7562}
HVOF Identification and Polishing (Superfinishing){0674, 0679, 1000, 7000, 7562}
Service Magazine
Double Lip Wiper Seals Must Be Installed Properly {7562}
2002/12/09
Procedure Now Available to Test the Position Sensor of a Hydraulic Cylinder {1439, 7562}
2012/10/04
Compatible Puller Stud and Hydraulic Cylinder Capacity Chart {0599, 7000, 7562}
2009/01/05
A Rework Procedure Improves the Seal Assembly Performance in Hydraulic Cylinders on Cat Products {7562}
2010/04/30

Caterpillar Parts SIS Catalog 140G :

CYLINDER GP-SIDESHIFT
9T-2483 CYLINDER GP-SIDESHIFT
CYLINDER GP-SIDESHIFT
105-2094 CYLINDER GP-SIDESHIFT
CYLINDER GP-SCARIFIER
9T-2554 CYLINDER GP-SCARIFIER
CYLINDER GP-SCARIFIER
165-2510 CYLINDER GP-SCARIFIER
CYLINDER GP-RIPPER
8J-1658 CYLINDER GP-RIPPER
CYLINDER GP-RIPPER
8J-1658 CYLINDER GP-RIPPER
CYLINDER GP-LIFT
9T-2472 CYLINDER GP-LIFT
CYLINDER GP-CENTERSHIFT
9T-2549 CYLINDER GP-CENTERSHIFT
CYLINDER GP-STEERING
9T-2395 CYLINDER GP-STEERING
CYLINDER GP-WHEEL LEAN
9T-2520 CYLINDER GP-WHEEL LEAN
DRIVE GP-CIRCLE
110-4656 DRIVE GP-CIRCLE
DRIVE GP-CIRCLE
5T-0570 DRIVE GP-CIRCLE
DRIVE GP-CIRCLE
5T-0570 DRIVE GP-CIRCLE
DRIVE GP-CIRCLE
6G-1925 DRIVE GP-CIRCLE
DRIVE GP-CIRCLE
6G-1925 DRIVE GP-CIRCLE
8W-2408 FLOAT AR-BLADE

Truck sale:

Caterpillar 140G
 
Caterpillar 140G
- motor graders
ZIEGLER CAT
Caterpillar 140G, motor graders, Construction
68,000 
Caterpillar 140G, motor graders, Construction
- motor graders
MICHIGAN CAT
Caterpillar 140 GC, motor graders, Construction
225,000 
Caterpillar 140 GC, motor graders, Construction
- motor graders
KELLY TRACTOR CO.
Caterpillar 140 GC, motor graders, Construction
247,000 
Caterpillar 140 GC, motor graders, Construction
- motor graders
KELLY TRACTOR CO.
Caterpillar 140G, motor graders, Construction
69,000 
Caterpillar 140G, motor graders, Construction
- motor graders
ZIEGLER CAT
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.