AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

9T-0978 VALVE GP-RESTRICTOR S/N 13W741-992 RESTRICTOR PART OF 8W-2384 LINES GP-HYDRAULIC AN ATTACHMENT 140G


HYDRAULIC SYSTEM
LINES GP-HYDRAULIC
VALVE GP-SELECTOR
VALVE GP-SHUTTLE
VALVE GP-SOLENOID
IMPLEMENTS
CIRCLE GP
DRAWBAR GP

MOTOR GRADER 140G MOTOR GRADER 13W
 140G Motor Grader 13W00741-00992 (MACHINE) POWERED BY 3306 Engine MEBP1763 140G 13W   (1975)

HYDRAULIC SYSTEM

LINES GP-HYDRAULIC
LINES GP-HYDRAULIC
8W-2384 LINES GP-HYDRAULIC
LINES GP-MOTOR
8W-2284 LINES GP-MOTOR
VALVE GP-RESTRICTOR
9T-0978 VALVE GP-RESTRICTOR
 

#MEBP17630390
 

9T-0978: VALVE GP-RESTRICTOR

9T-0978 VALVE GP-RESTRICTOR
S/N 13W741-992
RESTRICTOR
PART OF 8W-2384 LINES GP-HYDRAULIC
AN ATTACHMENT
i00143838 MEBP1763
9T0978 VALVE GP-RESTRICTOR Parts scheme
  For full view, you need register

Parts for your 140G MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 9T-0975 [1] ADAPTER  
2. 9T-0976 [1] HOUSING  
3. 9T-0977 [1] CHOKE  
4. 3D-2824 [1] SEAL-O-RING  
 

#MEBP17630391
 

9T-6183: VALVE GP-SELECTOR

9T-6183 VALVE GP-SELECTOR
S/N 13W741-992
PART OF 8W-2371 LINES GP-HYDRAULIC
AN ATTACHMENT
i00143872 MEBP1763
9T6183 VALVE GP-SELECTOR Parts scheme
  For full view, you need register

Parts for your 140G MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8J-3830 [2] PLUG  
2. [1] VALVE GP (BLADE FLOAT)  
3. 7M-8485 [2] SEAL-O-RING  
4. 366-4695 [1] PLUG AS  
  3J-1907 [1] SEAL-O-RING  
  360-3679 [1] PLUG-CONNECTOR (9/16-18-THD)  
5. 9T-6002 [1] SPRING  
6. 4B-4158 [1] SCREW-DRIVE (NO 4X0.25-IN)  
 

#MEBP17630392
 

4T-1860: VALVE GP-SHUTTLE

4T-1860 VALVE GP-SHUTTLE -BALL RESOLVER
S/N 13W741-992
PART OF 9T-2106 VALVE GP-COMBINATION, 6E-3173, 9T-0110, 9T-1869, 9T-1876, 9T-5019, 9T-5020 VALVE GP-CONTROL
ALSO AN ATTACHMENT
i00124638 MEBP1763
4T1860 VALVE GP-SHUTTLE Parts scheme
  For full view, you need register

Parts for your 140G MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 6V-5324 [1] SEAL-O-RING  
2. 4T-0928 [1] VALVE  
3. 147-6603 [1] SEAL-O-RING  
4. 147-6604 [2] RING-BACKUP  
5. 147-6605 [2] RING-BACKUP  
6. 1M-6718 [1] BALL  
7. 3J-1907 [1] SEAL-O-RING  
 

#MEBP17630393
 

6T-8046: VALVE GP-SOLENOID

6T-8046 VALVE GP-SOLENOID
S/N 13W741-992
PART OF 7T-6517 MANIFOLD GP-CONTROL
AN ATTACHMENT
i00143466 MEBP1763
6T8046 VALVE GP-SOLENOID Parts scheme
  For full view, you need register

Parts for your 140G MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 6T-8470 [1] COIL AS  
2. 7N-9737 [1] HOUSING-RECEPTACLE (14-GA TO 18-GA)  
  7N-7780 [1] PIN-CONNECTOR (14-GA TO 18-GA)  
  7N-7779 [1] SOCKET-CONNECTOR (14-GA TO 18-GA)  
3. 1S-9593 [2] STRAP-CABLE  
4. 3G-8171 [1] CARTRIDGE-VALVE  
5. 9S-1354 [1] NUT (5/8-18-THD)  
 

#MEBP17630394
 

8T-8692: VALVE GP-SOLENOID

8T-8692 VALVE GP-SOLENOID
S/N 13W741-992
24-VOLT
PART OF 8W-2371 LINES GP-HYDRAULIC
AN ATTACHMENT
i00143641 MEBP1763
8T8692 VALVE GP-SOLENOID Parts scheme
  For full view, you need register

Parts for your 140G MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 6T-8500 [1] COIL AS  
2. 7N-9737 [1] HOUSING-RECEPTACLE (14-GA TO 18-GA)  
3. 7N-7779 [1] SOCKET-CONNECTOR (14-GA TO 18-GA)  
4. 7N-7780 [1] PIN-CONNECTOR (14-GA TO 18-GA)  
5. 1S-9593 [2] STRAP-CABLE  
6. [1] CARTRIDGE AS  
7. 104-5970 [1] LOCKNUT (1/4-20-THD)  
  4B-4276 [1] WASHER (7X16X1.6-MM THK)  
   
    AVAILABLE REPAIR KIT(S):
  8J-9348 [1] KIT-SEAL (SOLENOID VALVE)  
 

#MEBP17630395
 

6G-2943: CIRCLE GP

6G-2943 CIRCLE GP
S/N 13W741-992
PART OF 8D-5910 CIRCLE GP
Type 1
i00143428 MEBP1763
6G2943 CIRCLE GP Parts scheme
  For full view, you need register

Parts for your 140G MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8D-9661 C [1] BEAM-BLADE  
2. 9D-2186 CB [2] SHIM  
  9D-2185 CB [2] SHIM  
  7B-5037 C [2] LOCK-BOLT  
3. 8D-9887 C [1] BRACE  
4. 6G-2949 C [1] BRACE  
5. 5T-3890 C [1] BRACE  
6. 6G-2946 [2] STOP  
7. 4D-4375 C [2] LUG  
8. 8D-3093 C [2] SPACER  
9. 2G-3971 [1] BRACKET AS  
10. 5T-3889 C [1] BRACE  
11. 8D-9886 C [1] BRACE  
12. 8D-9883 C [1] GUSSET  
13. 8D-9659 C [1] BEAM-BLADE  
14. 8D-9882 C [2] BLOCK-FILLER  
15. 8D-9884 C [1] GUSSET  
  B   USE AS REQUIRED
  C   CHANGE FROM PREVIOUS TYPE
 

#MEBP17630396
 

6G-2943: CIRCLE GP

6G-2943 CIRCLE GP
S/N 13W741-992
PART OF 8D-5910 CIRCLE GP
Type 2
i00143429 MEBP1763
6G2943 CIRCLE GP Parts scheme
  For full view, you need register

Parts for your 140G MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8W-2227 C [1] BEAM-BLADE  
2. 7B-5037 [2] LOCK-BOLT  
3. 8D-9887 [1] BRACE  
4. 6G-2949 [1] BRACE  
5. 5T-3890 [1] BRACE  
6. 6G-2946 [2] STOP  
7. 4D-4375 [2] LUG  
8. 8W-2226 C [1] BEAM-BLADE  
9. 2G-3971 [1] BRACKET AS  
10. 5T-3889 [1] BRACE  
11. 8D-9886 [1] BRACE  
12. 8D-9883 [1] GUSSET  
13. 8D-9884 [1] GUSSET  
14. 8D-9882 [2] BLOCK-FILLER  
  C   CHANGE FROM PREVIOUS TYPE
 

#MEBP17630397
 

8D-5910: CIRCLE GP

8D-5910 CIRCLE GP
S/N 13W741-992
PART OF 2C-8569 BLADE AR
Type 1
i00143583 MEBP1763
8D5910 CIRCLE GP Parts scheme
  For full view, you need register

Parts for your 140G MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 5K-5552 C [2] BOLT-LOCKING (3/8-16X3-IN)  
  8T-4896 [2] WASHER-HARD (10.2X18.5X2.5-MM THK)  
2. 6G-2943 Y [1] CIRCLE GP  
3. 8W-5232 C [4] BRACKET AS  
    (EACH INCLUDES)
  1F-0748 [1] NUT-WELD (1/2-13-THD)  
4. 5P-8245 [34] WASHER-HARD (13.5X25.5X3-MM THK)  
5. 4B-5273 C [4] WASHER (14.3X35X2.5-MM THK)  
6. 8W-5226 C [1] GUARD AS  
7. 6H-1717 C [30] BOLT (1/2-13X1.125-IN)  
8. 5T-8367 [1] STRIP-WEAR  
9. 8W-1751 [1] BRACKET AS  
10. 9X-8881 [2] BOLT (5/8-11X2.25-IN)  
  9X-8883 [2] BOLT (5/8-11X2.75-IN)  
  5P-8247 [4] WASHER-HARD (17X32X3.5-MM THK)  
11. 9D-8285 [1] CAP  
12. 8W-5228 C [1] GUARD AS  
13. 5T-8366 [4] STRIP-WEAR  
14. 8W-1749 [10] PLATE  
15. 2G-3221 B [5] SHIM (1.6-MM THK)  
  2G-3219 B [5] SHIM (0.8-MM THK)  
16. 8D-5949 [1] BAR-SPREADER  
17. 2B-2673 [2] NUT-CASTLE (1-3/4-5-THD)  
  1D-0503 [2] WASHER (45.25X76.2X6.35-MM THK)  
  3B-4647 [2] PIN-COTTER  
18. 7F-0482 [4] NUT-FULL (1-1/2-6-THD)  
19. 8W-4067 [1] BRACKET-RAIL (LH)  
  8W-4066 [1] BRACKET-RAIL (RH)  
20. 2K-0419 B [4] WASHER (0.766X3.5X0.065-IN THK)  
21. 6G-2947 [1] SHAFT  
22. 5D-6644 B [10] SHIM (0.762-MM THK)  
23. 0S-1595 C [4] BOLT (1/2-13X1.25-IN)  
  B   USE AS REQUIRED
  C   CHANGE FROM PREVIOUS TYPE
  Y   SEPARATE ILLUSTRATION
 

#MEBP17630398
 

8D-5910: CIRCLE GP

8D-5910 CIRCLE GP
S/N 13W741-992
PART OF 2C-8569 BLADE AR
Type 2
i00143584 MEBP1763
8D5910 CIRCLE GP Parts scheme
  For full view, you need register

Parts for your 140G MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 5K-5552 [2] BOLT-LOCKING (3/8-16X3-IN)  
  8T-4896 [2] WASHER-HARD (10.2X18.5X2.5-MM THK)  
2. 6G-2943 Y [1] CIRCLE GP  
3. 102-4140 [4] BRACKET  
4. 5P-8245 C [30] WASHER-HARD (13.5X25.5X3-MM THK)  
5. 7D-1649 C [16] WASHER-HARD (13.5X32X5-MM THK)  
6. 8W-5226 [1] GUARD AS  
7. 6H-1717 [30] BOLT (1/2-13X1.125-IN)  
8. 5T-8367 [1] STRIP-WEAR  
9. 8W-1751 [1] BRACKET AS  
10. 9X-8881 [2] BOLT (5/8-11X2.25-IN)  
  9X-8883 [2] BOLT (5/8-11X2.75-IN)  
  5P-8247 [4] WASHER-HARD (17X32X3.5-MM THK)  
11. 9D-8285 [1] CAP  
12. 8W-5228 C [1] GUARD AS  
13. 5T-8366 [4] STRIP-WEAR  
14. 8W-1749 [10] PLATE  
15. 2G-3221 B [5] SHIM (1.6-MM THK)  
  2G-3219 B [5] SHIM (0.8-MM THK)  
16. 8D-5949 [1] BAR-SPREADER  
17. 2B-2673 [2] NUT-CASTLE (1-3/4-5-THD)  
  1D-0503 [2] WASHER (45.25X76.2X6.35-MM THK)  
  3B-5320 [2] PIN-COTTER  
18. 7F-0482 [4] NUT-FULL (1-1/2-6-THD)  
19. 8W-4067 [1] BRACKET-RAIL (LH)  
  8W-4066 [1] BRACKET-RAIL (RH)  
20. 2K-0419 B [4] WASHER (0.766X3.5X0.065-IN THK)  
21. 6G-2947 [1] SHAFT  
22. 5D-6644 B [10] SHIM (0.762-MM THK)  
23. 7X-0334 C [8] BOLT (1/2-13X5-IN)  
  102-4139 [8] SPACER (18.85X26.67X78-MM THK)  
  6V-8188 [8] NUT (1/2-13-THD)  
  B   USE AS REQUIRED
  C   CHANGE FROM PREVIOUS TYPE
  Y   SEPARATE ILLUSTRATION
 

#MEBP17630399
 

6G-1932: DRAWBAR GP

6G-1932 DRAWBAR GP
S/N 13W741-992
PART OF 2C-8569 BLADE AR
i00143416 MEBP1763
6G1932 DRAWBAR GP Parts scheme
  For full view, you need register

Parts for your 140G MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3B-6753 [8] BOLT (3/4-10X4.75-IN)  
2. 5P-6652 [18] WASHER (20X44.5X6-MM THK)  
3. 6G-5442 [1] BALL  
4. 6G-1919 [1] CAP  
5. 4D-3907 B [4] SHIM (0.76-MM THK)(.76MM .03IN THK)  
6. 6D-3133 B [6] SHIM (0.25-MM THK)(.25MM .01IN THK)  
7. 6G-1664 [1] ADAPTER  
8. 5P-8291 [5] BOLT (3/4-16X2-IN)  
9. 2H-3764 [2] BOLT-SOCKET HEAD (1/4-20X1.5-IN)  
10. 4J-8622 [4] BOLT (7/8-9X4.75-IN)  
11. 9H-1031 [4] WASHER-HARD (24X41.5X6-MM THK)  
12. 3B-8489 [1] FITTING-GREASE (1/8-27 PTF)  
13. 6G-4526 [6] SHOE-CIRCLE GUIDE  
14. 4B-3604 [12] SETSCREW-SQUARE HEAD (3/4-10X2.5-IN)  
15. 1D-5119 [12] NUT (3/4-10-THD)  
16. 6G-1914 B [60] SHIM (0.76-MM THK)  
17. 6G-1915 B [18] SHIM (0.25-MM THK)  
18. 6G-4524 [10] STRIP-WEAR  
19. 6G-4525 [6] STRIP-WEAR  
20. 3B-6753 C [10] BOLT (3/4-10X4.75-IN)  
21. 6G-1933 [1] DRAWBAR & YOKE AS  
22. 2G-2411 [3] BALLSTUD AS  
23. 6G-5443 C [1] SHAFT AS  
24. 8F-9836 C [10] BOSS (3/8-16-THD)  
  B   USE AS REQUIRED
  C   CHANGE FROM PREVIOUS TYPE
 

Information:

Special Instruction
Hose and Coupling Assembly and Repair Process Guide{0684, 3016, 3103, 3154, 4133, 4257, 4304, 5057, 7554}
Hose and Coupling Assembly and Repair Process Guide{0684, 3016, 3103, 3154, 4133, 4257, 4304, 5057, 7554}
New Hose Couplings Are Now Used{0684, 5057, 5057, 7554}
New Hose Couplings Are Now Used{0684, 5057, 5057, 7554}
Technical Information Bulletin
Some Hydraulic Couplings are Identified with an Incorrect Part Number{5057}
Some Hydraulic Couplings are Identified with an Incorrect Part Number{5057}
Tool Operating Manual
358-4528 (380/480 V, 50/60 Hz, 3 Phase), 457-6040 (230V, 60 Hz, Single Phase) , 457-6039 (230V, 50 Hz, Single Phase) Hose Machine Group Set-Up and Operation{0599, 0684}
358-4528 (380/480 V, 50/60 Hz, 3 Phase), 457-6040 (230V, 60 Hz, Single Phase) , 457-6039 (230V, 50 Hz, Single Phase) Hose Machine Group Set-Up and Operation{0599, 0684}
Crimputer III Setup and Operation{0684, 5057}
Crimputer III Setup and Operation{0684, 5057}
242-3567 Variable Crimp Die Bowl{0684}
242-3567 Variable Crimp Die Bowl{0684}
Crimping Caterpillar 1E294, 1E716, 1E844 Hose and Couplings {0374, 0599, 0684, 0738, 5057}
Crimping Caterpillar 1E294, 1E716, 1E844 Hose and Couplings {0374, 0599, 0684, 0738, 5057}
Using the 209-3153 Portable Hose Machine {0374, 0599, 0684, 0738, 5057}
Using the 209-3153 Portable Hose Machine {0374, 0599, 0684, 0738, 5057}
4C-9910 Portable Hydraulic Tester (Flow 125 GPM) {0599, 0784, 5050, 5057, 5095}
4C-9910 Portable Hydraulic Tester (Flow 125 GPM) {0599, 0784, 5050, 5057, 5095}
Converting 137-7238 Hose Assembly Machines and 134-5640 Hose Assembly Machines (100 Ton) from Sony Control to Crimputer Control{0374, 0599, 0684, 5057}
Converting 137-7238 Hose Assembly Machines and 134-5640 Hose Assembly Machines (100 Ton) from Sony Control to Crimputer Control{0374, 0599, 0684, 5057}
Set up and Basic Operation of the 145-5161 Floor Model Hose Machine {0374, 0599, 0684, 0738, 5057}
Set up and Basic Operation of the 145-5161 Floor Model Hose Machine {0374, 0599, 0684, 0738, 5057}
Using the 9U-5792, 4C-5052, 4C-5054, 4C-3670, and 4C-3680 Hydraulic Hose Machines{0374, 0599, 0684, 0738, 5057}
Using the 9U-5792, 4C-5052, 4C-5054, 4C-3670, and 4C-3680 Hydraulic Hose Machines{0374, 0599, 0684, 0738, 5057}
Reuse And Salvage Guidelines
Crimputer III Setup and Operation{0684, 5057}
Crimputer III Setup and Operation{0684, 5057}
Service Magazine
Color Coded Dust Caps for S·O·S Ports Will Be Available {7770}
2003/12/01
Information Release Memo, HOS04-02, "XT-6 Hose and Couplings to XT-6 ES Components" Is Available {5057}
2004/06/21
Information Release Memo, PELJ0340 , "Reusable Couplings for Caterpillar -12 and -16 XT-6 ES Hose" {5057}
2004/06/28
Five New Wrenches Remove Snap To Connect Couplings from Hydraulic Hose Assemblies {0602, 0738, 5057}
2006/02/13
Caterpillar Hose and Coupling Practices {0618, 1000, 5057, 7000}
2008/05/26

Caterpillar Parts SIS Catalog 140G :

VALVE GP-RELIEF
9T-9905 VALVE GP-RELIEF
VALVE GP-RELIEF
9T-9193 VALVE GP-RELIEF
VALVE GP-RELIEF
9T-6129 VALVE GP-RELIEF
VALVE GP-RELIEF
9T-5675 VALVE GP-RELIEF
VALVE GP-PUMP CONTROL
9T-8092 VALVE GP-PUMP CONTROL
VALVE GP-CONTROL
9T-5020 VALVE GP-CONTROL
VALVE GP-CONTROL
9T-5020 VALVE GP-CONTROL
VALVE GP-CONTROL
9T-5020 VALVE GP-CONTROL
VALVE GP-SELECTOR
9T-6183 VALVE GP-SELECTOR
VALVE GP-SHUTTLE
4T-1860 VALVE GP-SHUTTLE
VALVE GP-SOLENOID
6T-8046 VALVE GP-SOLENOID
VALVE GP-SOLENOID
8T-8692 VALVE GP-SOLENOID
CIRCLE GP
6G-2943 CIRCLE GP
CIRCLE GP
6G-2943 CIRCLE GP
CIRCLE GP
8D-5910 CIRCLE GP
CIRCLE GP
8D-5910 CIRCLE GP

Truck sale:

Caterpillar 140G
 
Caterpillar 140G
- motor graders
ZIEGLER CAT
Caterpillar 140G, motor graders, Construction
68,000 
Caterpillar 140G, motor graders, Construction
- motor graders
MICHIGAN CAT
Caterpillar 140 GC, motor graders, Construction
225,000 
Caterpillar 140 GC, motor graders, Construction
- motor graders
KELLY TRACTOR CO.
Caterpillar 140 GC, motor graders, Construction
247,000 
Caterpillar 140 GC, motor graders, Construction
- motor graders
KELLY TRACTOR CO.
Caterpillar 140G, motor graders, Construction
69,000 
Caterpillar 140G, motor graders, Construction
- motor graders
ZIEGLER CAT
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.