WORK TOOLS
BLADE GPIMPLEMENTS
LINK GPWORK TOOLS
RIPPER GPSCARIFIER GP
RIPPER GP
SCARIFIER GP
WORK TOOLS
BLADE GP
#MEBP17630490
8D-5285: LIFT GP-BLADE
For full view, you need register
Parts for your 140G MOTOR GRADER:
| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 9D-2753 | [2] | LOCK | |
| 2. | 3B-6753 C | [4] | BOLT (3/4-10X4.75-IN) | |
| 5P-8248 C | [8] | WASHER-HARD (20X36.5X3.5-MM THK) | ||
| 2J-3506 C | [4] | NUT-FULL (3/4-10-THD) | ||
| 3. | 8W-5952 C | [1] | ARM AS | |
| 4. | 8D-8168 | [1] | BEARING (63.65-MM ID) | |
| 5. | 7D-8889 | [1] | BEARING (76.35-MM ID) | |
| 6. | 7K-9203 C | [8] | SEAL-LIP TYPE | |
| 7. | 8D-1784 | [2] | PIN | |
| 8. | 9D-6584 | [1] | SEAL-LIP TYPE | |
| 9. | 8D-9849 | [1] | BAR AS | |
| 10. | 8D-6629 | [4] | BEARING | |
| 11. | 6D-4671 | [1] | STUD-BALL | |
| 12. | 9D-3311 | [2] | BUSHING | |
| 9D-3526 | [1] | SPACER | ||
| 13. | 9D-3648 | [1] | RING-RETAINING | |
| 14. | 5T-3754 | [2] | LOCK | |
| 15. | 1A-5405 C | [4] | BOLT (5/8-11X5-IN) | |
| 5P-8247 C | [8] | WASHER-HARD (17X32X3.5-MM THK) | ||
| 4K-0367 C | [4] | NUT-FULL (5/8-11-THD)(FULL) | ||
| 16. | 8W-5953 C | [1] | ARM AS | |
| 17. | 8D-8168 | [1] | BEARING (63.65-MM ID) | |
| 18. | 7D-8889 | [1] | BEARING (76.35-MM ID) | |
| 19. | 7D-8891 | [2] | RETAINER | |
| 20. | 7D-8884 | [2] | SEAL (PLASTIC) | |
| 7H-2444 | [2] | SEAL-O-RING (RUBBER) | ||
| 21. | 7D-8876 | [2] | WASHER-THRUST (65.07X92.08X2.39-MM THK)(2.388MM THK) | |
| 7D-8875 | [4] | WASHER-THRUST (2.515X3.62X0.075-IN THK)(1.905MM THK) | ||
| 22. | 7D-8879 B | [8] | SHIM (0.127-MM THK) | |
| 7D-8881 B | [6] | SHIM (0.254-MM THK) | ||
| 7D-8882 B | [2] | SHIM (0.508-MM THK) | ||
| 23. | 7D-8877 | [2] | WASHER-THRUST (77.77X107.19X2.39-MM THK)(2.388MM THK) | |
| 7D-8878 | [4] | WASHER-THRUST (3.015X4.22X0.075-IN THK)(1.905MM THK) | ||
| 24. | 7D-8883 | [2] | SEAL (PLASTIC) | |
| 5F-0149 | [2] | SEAL-O-RING (RUBBER) | ||
| 25. | 2G-8238 | [2] | YOKE AS | |
| (EACH INCLUDES) | ||||
| 26. | 2G-8233 | [1] | RING | |
| 27. | 7D-8874 | [8] | WASHER-THRUST (1.905MM THK) | |
| 7D-8873 | [4] | WASHER-THRUST (2.388MM THK) | ||
| 28. | 8D-5214 | [4] | WASHER-THRUST (2.388MM THK) | |
| 8D-5217 | [10] | WASHER-THRUST (1.219MM THK) | ||
| 8D-5216 | [10] | WASHER-THRUST (.762MM THK) | ||
| 29. | 8D-4689 | [2] | PIN | |
| 30. | 2G-3984 | [1] | PLATE | |
| 31. | 9S-1366 | [1] | BOLT (1/2-13X2.5-IN) | |
| 2M-0849 | [1] | WASHER-HARD (13.5X25.5X5-MM THK) | ||
| 32. | 0S-1587 | [4] | BOLT (1/2-13X1.75-IN) | |
| 5P-8245 | [4] | WASHER-HARD (13.5X25.5X3-MM THK) | ||
| B | USE AS REQUIRED | |||
| C | CHANGE FROM PREVIOUS TYPE | |||
#MEBP17630491
6Y-8494: LINK GP-RIPPER
6Y-8494 LINK GP-RIPPER
S/N 13W790-992
PART OF 8J-6995 MOUNTING GP-RIPPER
ALSO AN ATTACHMENT
S/N 13W790-992
PART OF 8J-6995 MOUNTING GP-RIPPER
ALSO AN ATTACHMENT
For full view, you need register
#MEBP17630492
8J-6995: MOUNTING GP-RIPPER
8J-6995 MOUNTING GP-RIPPER
S/N 13W790-992
PART OF 8J-7586 RIPPER AR
Type 1
ALSO AN ATTACHMENT
S/N 13W790-992
PART OF 8J-7586 RIPPER AR
Type 1
ALSO AN ATTACHMENT
For full view, you need register
Parts for your 140G MOTOR GRADER:
| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 2J-6903 | [2] | SPACER | |
| 2. | 5P-8250 C | [10] | WASHER (28X49X5-MM THK) | |
| 3. | 8S-9093 | [10] | BOLT (1-8X2.25-IN) | |
| 4. | 8J-6990 | [1] | PLATE AS | |
| 5. | 2H-6488 | [2] | BOLT (1/2-13X5-IN) | |
| 1K-6872 | [2] | LOCKNUT (1/2-13-THD) | ||
| 6. | 4K-3150 | [2] | PIN | |
| 7. | 9H-2374 | [2] | BOLT | |
| 2K-4973 | [2] | LOCKNUT (3/8-16-THD) | ||
| 8. | 7T-7534 C | [2] | LINK AS | |
| (EACH INCLUDES) | ||||
| 9. | 9J-0084 | [1] | NUT | |
| 10. | 9J-5376 | [2] | EYEBOLT | |
| 11. | 9J-0090 | [2] | PIN | |
| 12. | 8S-9191 | [2] | BOLT (3/8-16X4-IN) | |
| 13. | 8J-7008 | [2] | PIN | |
| C | CHANGE FROM PREVIOUS TYPE | |||
#MEBP17630493
8J-6995: MOUNTING GP-RIPPER
8J-6995 MOUNTING GP-RIPPER
S/N 13W790-992
PART OF 8J-7586 RIPPER AR
Type 2
ALSO AN ATTACHMENT
S/N 13W790-992
PART OF 8J-7586 RIPPER AR
Type 2
ALSO AN ATTACHMENT
For full view, you need register
Parts for your 140G MOTOR GRADER:
| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 3D-0404 B | [8] | WASHER (1.781X3.25X0.25-IN THK) | |
| 2. | 8T-9378 | [2] | BOLT (3/8-16X4-IN) | |
| 3. | 7X-0403 | [10] | BOLT (1-8X2.25-IN) | |
| 8T-5361 | [10] | WASHER-HARD (28X49X5-MM THK) | ||
| 4. | 8J-6990 | [1] | PLATE AS | |
| 5. | 7X-0334 | [2] | BOLT (1/2-13X5-IN) | |
| 1K-6872 | [2] | LOCKNUT (1/2-13-THD) | ||
| 6. | 4K-3150 | [2] | PIN | |
| 7. | 7X-0293 | [2] | BOLT (3/8-16X4.75-IN) | |
| 8. | 6Y-8494 CY | [2] | LINK GP-RIPPER | |
| 9. | 2K-4973 | [4] | LOCKNUT (3/8-16-THD) | |
| 10. | 8J-7008 | [2] | PIN | |
| 11. | 9J-0090 | [2] | PIN | |
| B | USE AS REQUIRED | |||
| C | CHANGE FROM PREVIOUS TYPE | |||
| Y | SEPARATE ILLUSTRATION | |||
#MEBP17630494
2C-8596: MOUNTING GP-SCARIFIER
2C-8596 MOUNTING GP-SCARIFIER
S/N 13W741-992
PART OF 2C-8595 SCARIFIER AR
AN ATTACHMENT
S/N 13W741-992
PART OF 2C-8595 SCARIFIER AR
AN ATTACHMENT
For full view, you need register
#MEBP17630495
2C-8590: RIPPER AR
For full view, you need register
#MEBP17630496
8J-7586: RIPPER AR
For full view, you need register
#MEBP17630497
8J-7024: RIPPER GP
For full view, you need register
Parts for your 140G MOTOR GRADER:
| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 9W-3155 | [1] | CARRIAGE AS | |
| 2. | 4K-3150 | [2] | PIN | |
| 3. | 172-5454 | [1] | LINK AS-LOWER | |
| 4. | 3G-2579 | [4] | BEARING | |
| 5. | 2K-4233 | [8] | BOSS | |
| 6. | 8T-4180 M | [4] | SCREW-MACHINE (M5X0.8X20-MM) | |
| 7. | 134-2077 | [2] | REFLECTOR-RED (ON RIPPER) | |
| 8. | 8J-7008 | [2] | PIN | |
| 9. | 8T-9378 | [2] | BOLT (3/8-16X4-IN) | |
| 2K-4973 | [2] | LOCKNUT (3/8-16-THD) | ||
| 10. | 3B-8489 | [3] | FITTING-GREASE (1/8-27 PTF)(RIPPER CYLINDER BEARINGS) | |
| 11. | 4K-3004 | [2] | BEARING-TRUNNION SUPPLEMENTARY | |
| 12. | 5P-2424 | [8] | BOLT (1/2-13X2.25-IN) | |
| 13. | 1K-6872 | [10] | LOCKNUT (1/2-13-THD) | |
| 14. | 9J-0096 | [2] | LINK AS-UPPER | |
| (EACH INCLUDES) | ||||
| 15. | 3G-2581 | [2] | BEARING | |
| 16. | 7K-9203 | [8] | SEAL-LIP TYPE | |
| 17. | 2D-0626 | [8] | SEAL | |
| 18. | 8J-1434 Y | [3] | TOOTH GP-RIPPER (STRAIGHT) | |
| 19. | 2K-0120 | [1] | PIN | |
| 20. | 5P-2228 | [2] | BOLT (1/2-13X1-IN) | |
| 21. | 2K-0703 | [1] | BAR | |
| 22. | 7X-0333 | [2] | BOLT (1/2-13X4.75-IN) | |
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#MEBP17630498
2C-8595: SCARIFIER AR
For full view, you need register
#MEBP17630499
8W-0668: SCARIFIER GP
8W-0668 SCARIFIER GP
S/N 13W741-992
VEE TYPE
PART OF 2C-8595 SCARIFIER AR
Type 1
AN ATTACHMENT
S/N 13W741-992
VEE TYPE
PART OF 2C-8595 SCARIFIER AR
Type 1
AN ATTACHMENT
For full view, you need register
Parts for your 140G MOTOR GRADER:
| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 9D-5516 | [2] | LINK AS-LIFT | |
| (EACH INCLUDES) | ||||
| 7D-2135 | [1] | SOCKET-BALL | ||
| 2. | 7D-2196 | [2] | SLEEVE AS-LINK | |
| (EACH INCLUDES) | ||||
| 7D-2136 | [1] | SOCKET-BALL | ||
| 3. | 5D-8161 | [2] | PIN | |
| 5D-8159 | [2] | PIN AS | ||
| 4. | 6G-7746 | [1] | SHAFT | |
| 5. | 2G-4337 | [1] | DRAWBAR AS | |
| 6. | 8W-5597 | [1] | STUD-BALL | |
| 7. | 2G-7728 | [2] | COLLAR | |
| 8. | 2G-7309 | [1] | SHAFT | |
| 9. | 2G-4348 | [1] | BOLSTER AS | |
| 10. | 1D-4610 | [4] | BOLT (3/4-10X3.25-IN) | |
| 1B-4331 | [4] | NUT (3/4-10-THD) | ||
| 5P-6652 | [8] | WASHER (20X44.5X6-MM THK) | ||
| 11. | 5B-0577 | [2] | COLLAR | |
| 12. | 0L-2315 | [2] | BOLT (1/2-20X3.5-IN) | |
| 1B-4205 | [2] | NUT (1/2-20-THD) | ||
| 5P-8245 | [2] | WASHER-HARD (13.5X25.5X3-MM THK) | ||
| 13. | 8X-0557 | [1] | ARM | |
| 14. | 8W-0679 | [1] | SPACER (23-MM THK) | |
| 15. | 2G-4338 | [1] | DRAWBAR AS | |
| 16. | 8W-5597 | [1] | STUD-BALL | |
| 17. | 2G-7728 | [2] | COLLAR | |
| 18. | 1A-0224 | [2] | BOLT (7/8-14X3.5-IN) | |
| 1B-4208 | [2] | NUT-FULL (7/8-14-THD) | ||
| 19. | 8H-4040 | [4] | BOLT (1-1/8-12X4.5-IN) | |
| 3D-4904 | [4] | LOCKNUT (1-1/8-12-THD) | ||
| 3S-1349 | [4] | WASHER-HARD (31X52.5X6-MM THK) | ||
| 20. | 5K-1459 | [11] | LOCK PIN | |
| 21. | 2G-4332 | [1] | BLOCK AS-SCARIFIER | |
| 22. | 6B-3260 | [1] | TOOL | |
| 23. | 5K-1458 | [11] | GROMMET | |
| 24. | 8W-0680 | [1] | SPACER (4-MM THK) | |
| 25. | 3B-8489 | [4] | FITTING-GREASE (1/8-27 PTF) | |
| 26. | 5P-8250 | [8] | WASHER (28X49X5-MM THK) | |
| 27. | 6F-6992 | [4] | CAP-BALL SOCKET | |
| 7F-1327 B | [32] | SHIM (0.03-IN THK) | ||
| 28. | 8W-0663 | [2] | BRACKET AS | |
| (EACH INCLUDES) | ||||
| 8D-8572 | [1] | BUSHING | ||
| 29. | 9D-6591 | [4] | SEAL-LIP TYPE | |
| 30. | 2K-7471 | [4] | LOCKNUT (1-14-THD) | |
| 31. | 2H-3746 | [4] | BOLT (1-14X5-IN) | |
| 32. | 1A-8063 | [8] | BOLT (3/4-10X2.5-IN) | |
| 33. | 5P-8248 | [10] | WASHER-HARD (20X36.5X3.5-MM THK) | |
| 34. | 8D-0212 | [2] | ARM AS-LIFT | |
| (EACH INCLUDES) | ||||
| 7D-8245 | [1] | STUD-BALL | ||
| 35. | 9F-5124 | [11] | SHANK-TOOTH | |
| 36. | 0S-1626 | [2] | BOLT (3/4-10X1.5-IN) | |
| 5D-5652 | [2] | WASHER (9.53X20.5X10-MM THK)(9.53MM) | ||
| 37. | 2D-5572 | [11] | TOOTH-SCARIFIER | |
| B | USE AS REQUIRED | |||
