MECHANISM GP-FUEL PUMP & VALVE 2657878 - Caterpillar

Assemble
Table 1
Required Tools
Tool Part Number Part Description Qty
A 1P-0510 Driver Gp 1
Illustration 1 g06201642
The sleeve bearing and the rocker arm have oil supply holes. The holes must be aligned when the sleeve bearing is installed in the rocker arm. Align the joint of the sleeve bearing toward the top of the rocker arm. Align the oil hole in the sleeve bearing with the oil hole in the rocker arm. Use Tooling (A) to install sleeve bearing (7) in the rocker arm.
Align the scribe mark on socket (8) with the center line of the rocker arm. Press socket (8) fully into the rocker arm.
Place retaining ring (9) on button (10). Install button (10) in socket (8).
Illustration 2 g03788821
Install adjusting screw (6) and locknut (5).
Illustration 3 g03788820
Lubricate shaft (1) with clean unused engine oil. Install rocker arm assembly (2), spacer (3), and rocker arm assembly (4) onto shaft (1).End By:
Install rocker shaft and push rod.