parts catalog

MERCHANDISING 3254560 - Caterpillar

Alternative (cross code) number:
Caterpillar 3254560 MERCHANDISING

Buy MERCHANDISING 3254560 Caterpillar genuine, new aftermarket tractor parts with delivery

  For full view, you need register


Removal Procedure
In order to prevent possible personal injury, release the air pressure from the air tank before disconnecting any components of the air system.
Note: Install caps and plugs on all openings to prevent dirt or debris from entering the system. Cleanliness is an important factor. Before the removal procedure, the exterior of the component should be thoroughly cleaned to prevent dirt from entering the internal components.
Illustration 1 g06231486
Open the drain ball valve (1). Allow the water to drain into a suitable container. Properly dispose of the water. Allow the air system to purge completely of air.
Illustration 2 g06231501
Remove bolts (2) and remove panel (3).
Illustration 3 g06231518
Disconnect hose assembly (4), hose assembly (5), hose assembly (6), and hose assembly (7) and position out of the way.
Illustration 4 g06231527
Remove bolt (8) and remove bracket (9). Repeat for other bracket. Remove air tank (10).Installation Procedure
Install air tank (10) in the reverse order of removal.

Parts merchandising Caterpillar catalog:

Back to top
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.