MERCHANDISING- 3C7502 - Caterpillar

Removal Procedure
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Illustration 1 g01139720
Attach a suitable lifting device to exhaust manifold (2) and the turbocharger. The weight of exhaust manifold (2) and the turbocharger is approximately 40 kg (88 lb). Remove nuts (1) , the washers, and the spacers.
Remove exhaust manifold (2) , the turbocharger, and the gaskets from the cylinder head assembly.Installation Procedure
Table 1
Required Tools    
Tool     Part Number     Part Description     Qty    
A     5P-3931     Anti-Seize Compound     -    
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Illustration 2 g01139720
If the mounting studs were removed, install the mounting studs. Tighten the mounting studs to a torque of 35 5 N m (26 4 lb ft).
Apply Tooling (A) to the threads of the mounting studs.Note: Install the gaskets with the tabs upward.
Attach a suitable lifting device to exhaust manifold (2) and the turbocharger. The weight of exhaust manifold (2) and the turbocharger is approximately 40 kg (88 lb). Position the gaskets, exhaust manifold (2) , and the turbocharger on the cylinder head assembly.Note: Discard the nuts after use. Use new nuts for installation.
Install the spacers, the washers, and nuts (1) on the mounting studs. Tighten nuts (1) to a torque of 55 10 N m (41 7 lb ft).