0847096 METAL PLASTIC Caterpillar parts
Rating:
Alternative (cross code) number:
CA0847096
084-7096
0847096
CA0847096
084-7096
0847096
Weight: 61 pounds 27 kg.
Information:
Disassembly Procedure
Start By:
Remove the gear pump (rotor transmission). Refer to Disassembly and Assembly, "Gear Pump (Rotor Transmission) - Remove". Note: Cleanliness is an important factor. Before assembly, all parts should be thoroughly cleaned in cleaning fluid. Allow the parts to air dry. Wiping cloths or rags should not be used to dry parts. Lint may be deposited on the parts which may cause later trouble. Inspect all parts. If any parts are worn or damaged, use new parts for replacement.
Illustration 1 g01258941
Remove bolt (1) from end cover (2).
Remove end cover (2) from gear housing (4).
Remove O-ring seal (3) from end cover (2).
Remove wear plate (5) from end cover (2).
Remove gear housing (4) from end cover (7).
Remove dowel pin (5) and dowel pin (15) from gear housing (4).
Remove O-ring seal (3) from gear housing (4).
Remove drive gear (12) and driven gear (13) from gear housing (4).
Remove O-ring (8) from end cover (7).
Remove wear plate (9) from end cover (7).
Remove seal (10) from end cover (7).
Remove backup ring (11) from end cover (7).
Remove lip seal (14) from end cover (7).
Start By:
Remove the gear pump (rotor transmission). Refer to Disassembly and Assembly, "Gear Pump (Rotor Transmission) - Remove". Note: Cleanliness is an important factor. Before assembly, all parts should be thoroughly cleaned in cleaning fluid. Allow the parts to air dry. Wiping cloths or rags should not be used to dry parts. Lint may be deposited on the parts which may cause later trouble. Inspect all parts. If any parts are worn or damaged, use new parts for replacement.
Illustration 1 g01258941
Remove bolt (1) from end cover (2).
Remove end cover (2) from gear housing (4).
Remove O-ring seal (3) from end cover (2).
Remove wear plate (5) from end cover (2).
Remove gear housing (4) from end cover (7).
Remove dowel pin (5) and dowel pin (15) from gear housing (4).
Remove O-ring seal (3) from gear housing (4).
Remove drive gear (12) and driven gear (13) from gear housing (4).
Remove O-ring (8) from end cover (7).
Remove wear plate (9) from end cover (7).
Remove seal (10) from end cover (7).
Remove backup ring (11) from end cover (7).
Remove lip seal (14) from end cover (7).
Parts metal Caterpillar catalog:
0846530
METAL PLASTIC
Caterpillar
Caterpillar
0846175
METAL PLASTIC
Caterpillar
Caterpillar
0845762
METAL PLASTIC
Caterpillar
Caterpillar
0845393
METAL PLASTIC
Caterpillar
Caterpillar
0845043
METAL PLASTIC
Caterpillar
Caterpillar
0832691
METAL PLASTIC
Caterpillar
Caterpillar
0852209
METAL PLASTIC
Caterpillar
Caterpillar
0852192
METAL PLASTIC
Caterpillar
Caterpillar
0850252
METAL PLASTIC
Caterpillar
Caterpillar
0849621
METAL PLASTIC
Caterpillar
Caterpillar
0849204
METAL PLASTIC
Caterpillar
Caterpillar
0848006
METAL PLASTIC
Caterpillar
Caterpillar