METAL GP 1U6132 - Caterpillar

1U6132 METAL GP Caterpillar parts

Price: query

Add in request price Go to cart

Rating:

Alternative (cross code) number:
CA1U6132
1U-6132
1U6132

Weight: 5 pounds 2 kg.

Buy METAL GP 1U6132 Caterpillar genuine, new aftermarket tractor parts with delivery

For full view, you need register

Information:

Illustration 2 g03740471
Fan pump
(1) Fan pump control solenoid
Disconnect the wiring harness from fan pump control solenoid (1). Test Procedure
Start the engine.
Illustration 3 g02452604
Set the engine speed dial at "1".
Illustration 4 g02446738
Power mode control button located on the soft panel switch
Push down on the power mode control button in order to activate power mode. Note: The indicator light will be illuminated when power mode is activated.
Illustration 5 g02447036
Automatic Engine Speed Control (AESC) as displayed on the programmable function key in the monitor.
Disable the automatic engine speed control through the monitor by pressing the programmable button.
The air conditioning should be turned off for the following test.
Personal injury or death can result from sudden machine movement.Sudden movement of the machine can cause injury to persons on or near the machine.To prevent injury or death, make sure that the area around the machine is clear of personnel and obstructions before operating the machine.
Use the monitor in the cab in order to check the "Fan Speed".
Illustration 6 g03722433
Press the "Menu" key to display the main menu options.
Illustration 7 g03724611
Use the arrows to select "Service" mode from the "Main Menu". Press the "OK" key.
Input the password "FFF2". Press the "Enter" key.
Illustration 8 g03724614
Select "Override" mode from the "Service" menu. Press the "OK" key.
Illustration 9 g03724615
Record the "Fan Speed" from the "Override" menu into Table 1.
Press the "Return" key until the "Main Menu" appears.
Illustration 10 g03741041
Select "Maintenance Information" mode from the "Main Menu". Press the "OK" key.
Illustration 11 g03741043
Select "Engine Status" mode from the "Maintenance Information" menu. Press the "OK" key.
Illustration 12 g03741048
Record the "Engine Speed" from the "Engine Status" menu into Table 1.
Use the specifications in Table 1 in order to calculate the maximum displacement of the fan pump in Table 2.
Table 2
Calculated Maximum Displacement = ( A x B + C )
( D x E ) A - Factor 1B - Fan SpeedC - Control FlowD - Engine SpeedE - Factor 2