METER G HYD 5P3600 - Caterpillar

Engine Oil Pressure (10)
An engine oil pressure problem is a warning category 3. The warning indications are: the indicator for engine oil pressure (10) FLASHES, the action lamp FLASHES and the action alarm SOUNDS. This indicates a loss of oil pressure to the engine. Without engine oil pressure, do not operate the engine. Immediately stop the machine and shut the engine off. Check for proper oil level and/or repair the engine oil pressure system.Fuel Filter Pressure (11)
A fuel filter pressure problem is a warning category 1. The warning indications are: the indicator for fuel filter pressure (11) FLASHES. This indicates the fuel filter is restricted. Service the fuel filter the same day, to make sure the proper amount of fuel flows to the engine.Fuel Level (12)
A fuel level problem is a warning category 1. The warning indications are: the indicator for fuel level (12) FLASHES. This indicates the fuel level is low. Approximately 10% fuel capacity remains in the tank. This amount of fuel allows the operator approximately one hour of operation.Hydraulic Oil Level (13)
A hydraulic oil level problem is a warning category 3. The warning indications are: the indicator for hydraulic oil level (13) FLASHES, the action lamp FLASHES and the action alarm SOUNDS. This indicates a low level of oil in the hydraulic oil tank. Immediately stop the machine and shut the engine off. Check for proper oil level and/or repair the hydraulic oil system. The probable cause is a hydraulic oil leak.Hydraulic Oil Temperature (14)
A hydraulic oil temperature problem is a warning category 2. The warning indications are: the indicator for hydraulic oil temperature (14) FLASHES and the action lamp FLASHES. This indicates the hydraulic oil temperature is excessive. Change the operation of the machine so that the load on the hydraulic system is reduced. If the indicator does not go OFF, then stop the machine and shut the engine off. Check the hydraulic oil system.Power Train Oil Filter Pressure (15)
A power train (transmission, torque converter or hydrostatic) oil filter pressure problem is usually a warning category 2 or 3. The machine application determines the warning category; see the Operation & Maintenance Manual for the intended machine.Warning Category 2
The warning indications are: the indicator for power train oil filter pressure (15) FLASHES and the action lamp FLASHES. This indicates the power train (transmission, torque converter or hydrostatic) oil filter is restricted (plugged). Stop the machine at a convenient location and shut the engine off. Check the filters.