METER 6D5854 - Caterpillar

Illustration 4 g02174430
Attach the 6V-9873 Connector (4), the 6V-8398 O-Ring Seal (5), and the 3J-1907 O-Ring Seal (6) to the case drain port of the gear motor group. Then
Illustration 5 g02174487
Attach the 346-6830 Hose As (12) to the connector (4). Refer to Illustration 4. Then attach the 1S-0994 Clip (10) to the 346-6830 Hose As (12) and the 7D-7233 Clip (11) to the gear motor group return hose (B). Use hardware 8T-4195 Bolt (7), two 8T-4121 Hard Washers (9), and one 8T-4133 Nut (8) to secure these hoses.
Illustration 6 g02174435
Attach the 1S-0994 Clip (10) 346-6830 Hose As (12), and the 7D-7233 Clip (11) to the gear motor group return hose (B). Add the 302-3908 Spacer (13) between the clips. Use hardware 8T-6466 Bolt (14) and two 8T-4121 Hard Washers (9) .
Illustration 7 g02174557
Attach the 1S-0994 Clip (10) to the 346-6830 Hose As (12) and the 4S-1962 Clip (15) to tube (C) of the gear motor group return line. Use the 8T-4136 Bolt (16), two 8T-4121 Hard Washers (9), and 8T-4133 Nut (8) .
Illustration 8 g02174436
Route the case drain line underneath the cooling package. Attach the 1S-0994 Clip (10) to the case drain return tube (C) in two locations. Attach the 4S-1962 Clip (15) to the gear motor group return line (C) at two locations. Use the 8T-4136 Bolt (16), two 8T-4121 Hard Washers (9), and 8T-4133 Nut (8) to connect both clamps at both locations.
Illustration 9 g02174437
Attach the 1S-0994 Clip (10) to the case drain (12) and the 4S-1962 Clip (15) to the gear motor group return tube (C). Use the 8T-4136 Bolt (16), two 8T-4121 Hard Washers (7), and 8T-4133 Nut (8) .
Illustration 10 g02174619
Attach the 1S-0994 Clip (10) to the case drain (12) and the 5P-7854 Clip (17) to the implement return line (D). Use the 8T-4196 Bolt (18), two 8T-4121 Hard Washers (9), and 8T-4133 Nut (8) .
Illustration 11 g02174438
Attach the 6V-8716 Connector (19), to the suction port of the hydraulic tank. Use the 6V-9746 O-Ring Seal (20). and the 7M-8485 O-Ring Seal (21) to make this connection. Attach the 8T-8899 Elbow (22), and the 6V-9746 O-Ring Seal (20) to the straight connector (19) that is located on the hydraulic tank. Connect the 346-6830 Hose As (12) to the 8T-8899 Elbow (22) .