METERING PUMP GROUP 9J7026 - Caterpillar

Illustration 1. Large parts cart.
Illustration 2. Parts basket at convenient work height.A smaller rack can also be made from this FT Drawing, which holds fewer parts baskets and has a non-adjustable (not able to be adjusted) pedestal (Illustration 3). Parts baskets may be placed on the base of this rack. The smaller rack is normally fitted with a three ring binder on the pedestal to hold assembly charts.
When these racks are used, identification marks must be placed on each parts basket to give an indication of where the parts are used on the engines. Drawings for the FT1319 Hardware and Assembly Chart Rack can be ordered from your Divisional Service Manager.
Illustration 3. Small parts cart.
Illustration 4. Rack with legs being placed in solvent tank.