MIRROR GP 1104462 - Caterpillar

Removal Procedure
Start By:
Connect the steering frame lock. Refer to Disassembly and Assembly, "Steering Frame Lock - Separate and Connect".
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting, and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids.Refer to Special Publication, NENG2500, "Dealer Service Tool Catalog" for tools and supplies suitable to collect and contain fluids on Cat® products.Dispose of all fluids according to local regulations and mandates.
Drain the implement hydraulic system into a suitable container.
Illustration 1 g00785785Note: The steering control is located on the back side of the hydraulic oil tank.Note: Put identification marks on the ten hose assemblies for installation purposes.
Remove hose assemblies (1), (2), (3), (4), (5), (6), (7), (8), (9), and (10). Remove tube assemblies (5).
Illustration 2 g01102263
Remove bolts (11) and the washers. Remove steering control valve (12). The weight of steering control valve (12) is approximately 31 kg (68 lb).