MIRROR AS 1853874 - Caterpillar

Illustration 1 g06356823
Table 1
Specification for 467-0520 Drive Axle Mounting
Item Qty Part Specification Description
1 8 147-5112 Bolts (Front Axle) 1) Assemble all bolts to a minimum of 2 full threads to ensure that holes in axles are aligned with the holes in frame.
2) Verify that there is no gap between the frame and axle.
3) Tighten bolts in alphabetical order shown. Apply torque and turn method using dry joint (no lubrication). Apply 340 40 N m (251 30 lb ft) initial torque followed by a 180 5 degrees turn.
2 6 147-5112 Bolts (Rear Axle) 1) Assemble all bolts to a minimum of 2 full threads to ensure that holes in axles are aligned with the holes in frame.
2) Run bolts down to close gap between frame and rear axle trunnions.
3) Apply maximum 350 N m (258 lb ft) to ensure full engagement of trunnion dowels into frame.
4) Verify that there is no gap between frame and rear axle trunnions.
5) Release bolts minimum one full turn.
6) Tighten bolts in alphabetical order shown. Apply torque and turn method using dry joint (no lubrication). Apply 340 40 N m (251 30 lb ft) initial torque followed by a 180 5 degrees turn.