MIRROR GP-REAR VIEW 2674366 - Caterpillar

Illustration 16 g00712118
Install cap (2) and new O-ring seal (11) on plug (8) .
Illustration 17 g00712111
Install pushrod (16) in plug (8) .
Install piston (18) on pushrod (16) .
Illustration 18 g00712108
Personal injury can result from being struck by parts propelled by a released spring force.Make sure to wear all necessary protective equipment.Follow the recommended procedure and use all recommended tooling to release the spring force.
Install plug (8) and the pushrod in the body assembly.
Repeat Steps 5 through 19 in order to install the other three spool assemblies.
Illustration 19 g01021623
Install cover (25) and bolts (26). Tighten bolts (26) to a torque of 29 3 N m (22 2 lb ft).
Illustration 20 g01021622
Install bushings (20) in covers (24) .
Illustration 21 g01021621
Install covers (24) and bolts (4). Tighten bolts (4) to a torque of 79 10 N m (58 7 lb ft).
Illustration 22 g01021620
Install setscrews (5) and nuts (17) .
Illustration 23 g00711976
Install pedal (12) on the pilot valve.
Illustration 24 g00711974
Install camshaft (19) in pedal (12). Center camshaft (19) in pedal (12) .
Install setscrew (6) in pedal (12). Tighten setscrew (6) to a torque of 7 1.0 N m (61 9 lb in).
Illustration 25 g00712296
Illustration 26 g01021620
Adjust setscrew (5) in order to set Dimension (a), at 12.4° 0.6° for pedal (12) .
Tighten nuts (17) to a torque of 33 3 N m (25 3 lb ft).
Repeat Steps 24 through 27 in order to install the remaining pedal.
Illustration 27 g00711962
Install new O-ring seals (38) and (39) on fittings (37) .
Illustration 28 g01021619
Install fittings (37) on the pilot valve.End By: Install the pilot valve. Refer to , "Pilot Valve (Travel) - Install".