MIRROR-REAR VIEW 3731753 - Caterpillar

Removal Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A 138-7575 Link Bracket 7 Start By:
Remove the engine oil pan. Refer to Disassembly and Assembly, "Engine Oil Pan - Remove".
Remove the turbocharger. Refer to Disassembly and Assembly, "Turbocharger - Remove".
Remove the crankshaft front seal and the wear sleeve. Refer to Disassembly and Assembly, "Crankshaft Front Seal and Wear Sleeve - Remove".
Remove the water pump. Refer to Disassembly and Assembly, "Water Pump - Remove".
Remove the engine oil pump. Refer to Disassembly and Assembly, "Engine Oil Pump - Remove".
Remove the auxiliary water pump. Refer to Disassembly and Assembly, "Auxiliary Water Pump - Remove".
Remove the exhaust elbow. Refer to Disassembly and Assembly, "Exhaust Elbow - Remove and Install".
Illustration 1 g01066049
Remove elbow (1) and the gasket.
Remove elbow (3) from front cover (2).
Illustration 2 g01066050
Remove cover (4) and the gasket from front housing (2).
Remove covers (5) and the O-ring seals from front housing (2).
Illustration 3 g01066051
Remove clips (6) from front housing (2).
Illustration 4 g01066052
Attach Tooling (A) and a suitable lifting device to front housing (2).
Remove bolts (7) from idler shafts (8). Note: Do not remove bolts (10) from idler shafts (8). Idler gears (9) do not need to be removed.
Illustration 5 g01066053
Remove bolts (11) from front housing (2).
Remove bolts (12) from front housing (2).
Remove front housing (2) and the gasket from the engine. The weight of front housing (2) is approximately 255 kg (560 lb). Installation Procedure
Table 2
Required Tools
Tool Part Number Part Description Qty
A 138-7575 Link Bracket 7
Illustration 6 g01066053
Attach Tooling (A) and a suitable lifting device to front housing (2).
Position front housing (2) and the gasket onto the engine. The weight of front housing (2) is approximately 255 kg (560 lb). Note: The idler gears will need to be aligned.
Install bolts (12) into front housing (2).
Install bolts (11) into front housing (2).
Illustration 7 g01066052
Install bolts (7) into idler shafts (8). Note: Bolts (10) and idler shafts (8) were not removed. Idler gears (9) were not removed.
Remove Tooling (A) from front housing (2).
Illustration 8 g01066051
Install clips (6) onto front housing (2).
Illustration 9 g01066050
Install the O-ring seals and covers (5) onto front housing (2).
Install the gasket and cover (4) onto front housing (2).
Illustration 10 g01066049
Install elbow (3) onto front cover (2).
Install the gasket and elbow (1). End By:
Install the exhaust elbow. Refer to Disassembly and Assembly, "Exhaust Elbow - Remove and Install".
Install the auxiliary water pump. Refer to Disassembly and Assembly, "Auxi