MODIFICATION AR 3256544 - Caterpillar

Table 2
Required Tooling
Part Number Description
514-7056 Control Harness As Troubleshooting Procedure
Follow the below procedure to troubleshoot the tamper feature on machines with the updated PL522 gateway software:
Ensure PL552 515-3070 Monitor Software Gp had been updated on machines.
Illustration 1 g06103010
(1) H-C1
(2) H_B1 BRAID-YL
(3) H_B2 BRAID-YL
(4) H_B3 BRAID-YL
(5) H_B4 BRAID-YL
(6) H-T2
(7) H_B7
(8) H_B6
(9) H-S1
(10) H-S2
(11) H-T1
(12) H_B2
(13) H-C2
Illustration 2 g06103045
(14) PL522 70-Pin connector on control module
(15) CAN-2 resistor in chassis harness
(16) Disc box
Now follow the below procedure to connect harness assembly, 70-Pin connector, and CAN-2 resistor:
Illustration 3 g06103349
(17) Pin 50
Connect Pin H-T1 (11) ( 514-7056 Control Harness As) to Pin 50 (17) of PL522 70-Pin connector.
Illustration 4 g06103351
(18) Pin 34
Connect Pin H-T2 (6) ( 514-7056 Control Harness As) to Pin 34 (18) of PL522 70-Pin connector.
Illustration 5 g06103352
Find CAN-2 resistor in chassis harness beneath breaker box with two wires marked 252 and 262 as shown in Illustration 5.
Illustration 6 g06103358
Disconnect CAN-2 resistor with chassis connector.
Illustration 7 g06103357
Connect H-C1 (1) with CAN-1 resistor and H-C2 (13) with chassis connector respectively.Note: No need to install service tool if these two wires had been already installed on machines.Note: Troubleshooting using service tool to restore disabled or de-rate machine to normal operation or modify machine security levels.
Connect to the equipment service port connector using your Caterpillar Communication Adapter and follow the below mentioned procedure:Note: Cat® Electronic Technician (Cat ET) Service Tool 2016A is required for this troubleshooting.
Illustration 8 g06103360
Choose the "Product Link ECM" and click "Ok".
Illustration 9 g06103363
Once "ECM summary" page displayed, select "Switch Data Link" button.
Illustration 10 g06103364
Electronic Control Module (ECM) will be detected second time to switch data link.
Illustration 11 g06103365
Illustration 12 g06103366
Once "ECM summary" page displayed, dealer can restore disabled or de-rate machine to normal operation or modify machine security levels.Note: "Enter Factory password" page is different from former page.