MODIFICATION AR-ENGINE 3861816 - Caterpillar

Do not operate any hydraulic controls if the engine speed is less than 1200 RPM. The hydraulic system will stall the engine and damage may occur to the engine.
To prevent injury, make sure that no one is working on the machine or near the machine. Always maintain control of the machine.Raise the machine so that there is 30 to 60 cm (1 to 2 feet) of ground clearance.Reduce the machine speed when you maneuver in tight quarters or when you are going over a hill. Partially release the accelerator pedal in order to reduce machine speed. Completely releasing the accelerator pedal will stop the machine.Drive the machine forward for best visibility and for best control.Choose the correct mode of operation for the current application (working mode or roading mode).When you are traveling over terrain, raise the work tool to a sufficient height and raise the machine in order to negotiate obstacles on the ground. Do not move the work tool near the cab.Reference: For more information about operating the machine, refer to Operation and Maintenance Manual, "Operating Technique Information".