1455507 MODULE GP-DISPLAY Caterpillar parts
TH103, TH62, TH63, TH82, TH83
Rating:
Alternative (cross code) number:
CA1455507
145-5507
1455507
CA1455507
145-5507
1455507
Weight: 0.95 pounds 0 kg.
TELEHANDLER,
This part in 2 request:
Show.
This information for suppliers only!
2021-02-03
2021-01-20
Number on catalog scheme:
2
For full view, you need register
Information:
Installation Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
C 1U-6396 O-Ring Assembly Compound 1
D 4C-4030 Thread Lock Compound 1
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Illustration 1 g01441026
Typical example
Illustration 2 g01444555
Sequence for tightening accessory drive
Inspect the bore in front housing (3) for damage. If necessary, replace the front housing. Refer to Disassembly and Assembly, "Housing (Front) - Remove" and Disassembly and Assembly, "Housing (Front) - Install".
Lightly lubricate a new O-ring seal (5) (not shown) with Tooling (C). Install the O-ring seal (not shown) into the groove in accessory drive housing (4).
Lightly lubricate all bearings, and all gears with clean engine lubricating oil. Install the assembly of the accessory drive to the front housing. Ensure that the flange on the accessory drive housing is flush with the front housing.
Apply Tooling (D) to allen head screws (1) and allen head screw (2).
Install allen head screws (1) and allen head screw (2) to accessory drive housing (4).
Tighten allen head screws (1) to a torque of 22 N m (16 lb ft). Tighten allen head screw (2) to a torque of 44 N m (32 lb ft). Tighten allen head screws (1) and (2) in the sequence that is shown in Illustration 2.
Ensure that there is tactile backlash between the idler gear and the accessory drive gear.
Table 1
Required Tools
Tool Part Number Part Description Qty
C 1U-6396 O-Ring Assembly Compound 1
D 4C-4030 Thread Lock Compound 1
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Illustration 1 g01441026
Typical example
Illustration 2 g01444555
Sequence for tightening accessory drive
Inspect the bore in front housing (3) for damage. If necessary, replace the front housing. Refer to Disassembly and Assembly, "Housing (Front) - Remove" and Disassembly and Assembly, "Housing (Front) - Install".
Lightly lubricate a new O-ring seal (5) (not shown) with Tooling (C). Install the O-ring seal (not shown) into the groove in accessory drive housing (4).
Lightly lubricate all bearings, and all gears with clean engine lubricating oil. Install the assembly of the accessory drive to the front housing. Ensure that the flange on the accessory drive housing is flush with the front housing.
Apply Tooling (D) to allen head screws (1) and allen head screw (2).
Install allen head screws (1) and allen head screw (2) to accessory drive housing (4).
Tighten allen head screws (1) to a torque of 22 N m (16 lb ft). Tighten allen head screw (2) to a torque of 44 N m (32 lb ft). Tighten allen head screws (1) and (2) in the sequence that is shown in Illustration 2.
Ensure that there is tactile backlash between the idler gear and the accessory drive gear.
Caterpillar parts catalog:
Parts module Caterpillar catalog:
1339780
MODULE GP-DISPLAY
TH103, TH62, TH63, TH82, TH83
TH103, TH62, TH63, TH82, TH83
1229435
MODULE GP-DISPLAY
TH62, TH63, TH82, TH83
TH62, TH63, TH82, TH83
1418212
MODULE GP-WARNING INDICATOR
TH103, TH62, TH63, TH82, TH83
TH103, TH62, TH63, TH82, TH83
1366936
MODULE-CHASSIS CONTROL
35, 45, 55
35, 45, 55
35, 45, 55
3996131
MODULE AR-DIESEL EXHAUST FLUID
D6T LGP, D6T LGPPAT
D6T LGP, D6T LGPPAT
3945371
MODULE AR-CLEAN EMISSIONS
D6T LGP, D6T LGPPAT
D6T LGP, D6T LGPPAT
TH220B, TH330B, TH340B, TH350B, TH355B, TH460B, TH560B, TH580B
1890148
MODULE GP-WARNING INDICATOR
420D, 428D, 430D, 432D, 438D, 442D, 446D
420D, 428D, 430D, 432D, 438D, 442D, 446D
1985800
MODULE
35, 45, 55
35, 45, 55
1985799
MODULE
35, 45, 55
35, 45, 55
1472768
MODULE-CONTROL
35, 45
35, 45
1418212
MODULE GP-WARNING INDICATOR
TH103, TH62, TH63, TH82, TH83
TH103, TH62, TH63, TH82, TH83