MODULE GP-QUAD GAUGE 1809285 - Caterpillar

Illustration 1 g03476123
Table 1
Item Qty Part Specification Description
1 2 - Tighten screws to 8.75 1.05 N m (77.44 9.29 lb in).
2 2 6V-8188 Nut Ground terminal. Tighten nut to 30.5 3.5 N m (269.9 31.0 lb in).
3 - - Tighten nut to 2.25 0.25 N m (19.91 2.21 lb in).
4 - - Tighten nut to 2.25 0.25 N m (19.91 2.21 lb in).
5 1 4B-2049 Nut Torque to 2.60 0.80 N m (23.01 7.08 lb in).
6 1 4B-2049 Nut The switch terminal must be insulated with heat shrinkable tubing. Do not use molded terminals.
Torque to 2.60 0.80 N m (23.01 7.08 lb in).
7 1 6V-8188 Nut Motor terminal. Tighten nut to 30.5 3.5 N m (269.9 31.0 lb in).
8 1 6V-8188 Nut A maximum of three cable terminals or wire terminals may be used with the battery terminal nut. A maximum of two of the terminals may be equal to or greater than 0 AWG.
Battery terminal. Tighten nut to 30.5 3.5 N m (269.9 31.0 lb in).
9 - - Motor frame terminal. Tighten nut to 30.5 3.5 N m (269.9 31.0 lb in).
- - - System voltage is 24 V.
- - - No load performance at 25 °C (77 °F):
Speed 6612.0 1887.5 rpm
Current 100 30 amp.
Voltage 23 V
When the electric starting motor is viewed from the pinion end, the motor rotates in the clockwise direction.