MODULE GP-ALARM 2361158 - Caterpillar

AFFECTED PRODUCT
Model Identification Number
794 AC MN500052-00056
PARTS NEEDED
Qty
Part Number Description
1 2190305 FILM- (if required)
1 2463331 FILM-PAYLOAD (if required)
1 4663786 FILM-RETARDER (if required)
1 4996702 FILM-794 AC (if required)
1 4996703 FILM-CAT (if required)
1 5205437 FILM-FOPS/ROPS (if required)
In order to allow equitable parts availability to all participating dealers, please limit your initial parts order to not exceed 7% of dealership population. This is an initial order recommendation only, and the ultimate responsibility for ordering the total number of parts needed to satisfy the program lies with the dealer.
ACTION REQUIRED
Inspect the film locations for nomenclature correctness. If nomenclature is correct no further action is required. If nomenclature requires updating follow Steps 1 through 3 for applicable updates:
1. On the right hand rear outside of cab remove the existing ROPS certification label and replace with new 219-0305 Film-Warning (1) and 520-5437 Film-FOPS/ROPS (2) as shown in Image 1.
2. Inside the cab on the left hand side door post remove the existing payload and retarder films and replace with new 246-3331 Film-Payload (3) and 466-3786 Film-Retarder (4) as shown in Image 2. (Note: the correct retarder film should display 466-3786 2 in the lower right corner of film).
3. On the left hand and right hand sides of body remove the existing body films and replace with new 499-6702 Film left hand side of body and 499-6703 Film right hand side of body. Refer to Media Number UENR1145-01, "794 AC Off-Highway Truck Field Assembly", for body film locations.
Image1
Image2
SERVICE CLAIM ALLOWANCES
Product smu/age whichever comes first Caterpillar Dealer Suggested Customer Suggested
Parts % Labor Hrs% Parts % Labor Hrs% Parts % Labor Hrs%
0-30000 hrs,
0-48 mo 100.0% 100.0% 0.0% 0.0% 0.0% 0.0%
This is a 0.5-hour job
This is a 0.5-hour job to inspect the film locations for nomenclature correctness. If nomenclature is correct no further action is required. An additional 2.5 hours will be allowed to update the films if required.
PARTS DISPOSITION
Handle the parts in accordance with your Warranty Bulletin on warranty parts handling.