MODULE AS-INLET 2882811 - Caterpillar

Removal Procedure
Start By:
Prepare for disassembly. Refer to Disassembly and Assembly, "Preparation for Disassembly".Note: Cleanliness is an important factor. Before the disassembly procedure, the exterior of the component should be thoroughly cleaned. This will help to prevent dirt from entering the internal mechanism.
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids.Refer to Special Publication, NENG2500, "Caterpillar Tools and Shop Products Guide" for tools and supplies suitable to collect and contain fluids on Caterpillar products.Dispose of all fluids according to local regulations and mandates.
Note: Put identification marks on all lines, on all hoses, on all wires, and on all tubes for installation purposes. Plug all lines, hoses, and tubes. This helps to prevent fluid loss and this helps to keep contaminants from entering the system.
Illustration 1 g00629636
Remove four bolts (1) from paint reservoirs (2) .
Illustration 2 g00629639
Invert paint reservoirs (2). Disconnect hose assemblies (3). Remove paint reservoirs (2) .
Illustration 3 g00629643
Disconnect electrical connectors (4) .
Disconnect hose assemblies (5) .
Remove two bolts (6). Remove valve (7) .