MODULE GP-MONITOR KEYPAD 2971407 - Caterpillar

The engine is shipped with an engine oil level gauge that is not marked. The engine oil level gauge is not marked because the angle of the installation and the location of the engine oil level gauge can be different for each engine. The angle of the installation and the location of the engine oil level gauge will affect "ADD" mark (Y) and "FULL" mark (X) . These marks are engraved on the engine oil level gauge.The engine oil level gauge must be calibrated after the engine is installed in the vessel.Tables 1 through 4 list the installation angles (front to rear) and the corresponding oil level marks. Use a marking pen in order to engrave "ADD" mark (Y) and "FULL" mark (X) on the engine oil level gauge according to the information in Tables 1 through 4.
Illustration 1 g00468470
Oil level gauge (X) "FULL" mark (Y) "ADD" mark
Table 1
3208 Marine Engine (75V1-UP )
Oil Level Gauge Calibration
Left Hand Service    
Angle (1)     (X) "FULL" Mark     (Y) "ADD" Mark    
15 degrees    
759 mm (29.9 inch)    
773 mm (30.4 inch)    
14 degrees    
755 mm (29.7 inch)    
769 mm (30.3 inch)    
13 degrees    
751 mm (29.6 inch)    
766 mm (30.2 inch)    
12 degrees    
748 mm (29.4 inch)    
762 mm (30.0 inch)    
11 degrees    
743 mm (29.6 inch)    
758 mm (29.8 inch)    
10 degrees    
739 mm (29.1 inch)    
755 mm (29.7 inch)    
9 degrees    
735 mm (28.9 inch)    
752 mm (29.6 inch)    
8 degrees    
732 mm (28.8 inch)    
748 mm (29.4 inch)    
7 degrees    
728 mm (28.7 inch)    
748 mm (29.4 inch)    
6 degrees    
723 mm (28.5 inch)    
740 mm (29.1 inch)    
5 degrees    
719 mm (28.3 inch)    
736 mm (29.0 inch)    
4 degrees    
714 mm (28.1 inch)    
732 mm (28.8 inch)    
3 degrees    
711 mm (28.0 inch)    
728 mm (28.7 inch)    
2 degrees    
707 mm (27.8 inch)    
725 mm (28.5 inch)    
1 degree    
702 mm (27.6 inch)    
720 mm (28.3 inch)    
0 degrees    
698 mm (27.5 inch)    
716 mm (28.2 inch)    
-1 degree    
693 mm