MODULE GP-DISPLAY 3738189 - Caterpillar

Removal Procedure
Table 1
Required Tools
Tooling Part Number Part Description Qty
A 138-7576 Link Bracket 1 Start By:
Connect the steering frame lock. Refer to Disassembly and Assembly, "Steering Frame Lock - Separate and Connect".
Lower the implement to the ground.
Illustration 1 g00360523
Disconnect electrical connector (1). The electrical connector is located at the right rear side of the cab.
Illustration 2 g00360528
Remove the bolts, the washers and spacers (2). Remove four platform panels (3) from the platform behind the cab.
Illustration 3 g00360526
Attach Tooling (A), a hoist and suitable lifting chains to the top of rollover protective structure (4). The weight of the rollover protective structure is 2480 kg (5460 lb).
Illustration 4 g00360527
Remove bolts (5) from each side of rollover protective structure (4). Carefully remove the rollover protective structure from the machine. Installation Procedure
Note: Thoroughly clean the mounting surfaces on the rollover protective structure and on the main frame of the machine prior to the installation.
Illustration 5 g00360526
Attach Tooling (A), a hoist and suitable lifting chains to the top of rollover protective structure (4). The weight of the rollover protective structure is 2480 kg (5460 lb).
Illustration 6 g00360527
Carefully install rollover protective structure (4) on the machine. Install bolts (5) on each side of the rollover protective structure.
Illustration 7 g00360528
Install four platform panels (3) on the platform behind the cab. Install spacers (2), the washers and the bolts.
Illustration 8 g00360523
Connect electrical connector (1) at the right rear side of the cab. End By:
Separate the steering frame lock. Refer to Disassembly and Assembly, "Steering Frame Lock - Separate and Connect".