MODULE AR-EXH 4424910 - Caterpillar

Illustration 1 g03366944
Table 1
Specification for 352-9765 Electric Starting Motor Gp and 150-8867 Electric Starting Motor Gp
Item Qty Part Specification Description
1 2 6V-8188 Nut Final installation torque to 30.5 3.5 N m (269.9 30.9 lb in).
B - - Clearance between the pinion and the housing is 9.1 mm (0.36 inch).
2 1 4B-2049 Nut Final installation torque to 3.4 1.2 N m (30.1 10.6 lb in).
3 1 4B-2049 Nut Switch terminal.
The switch terminal must be insulated with heat shrinkable tubing. Do not use molded terminals.
Final installation torque to 3.4 1.2 N m (30.1 10.6 lb in).
4 1 6V-8188 Nut Ground terminal.
Final installation torque to 30.5 3.5 N m (269.9 31.0 lb in).
5 1 6V-8188 Nut Battery terminal.
A maximum of three cable terminals or wire terminals may be used with the battery terminal nut. A maximum of two of the cable terminals may be equal to or greater than 0 AWG.
Torque to 30.5 3.5 N m (269.9 31.0 lb in).
6 - - Motor frame terminal.
Torque to 30.5 3.5 N m (269.9 31.0 lb in).
- - - Pull-in current at 10 V and 20° C (68° F) is 82.0 to 94.2 Amp.
Hold-in current at 10 V and 20° C (68° F) is 16.4 Amp max.
- - - When the electric starting motor is viewed from the pinion end, the motor rotates in the clockwise direction.
- - - No load conditions at 25 °C (77 °F):
Speed is 4600 to 7100 rpm.
Current is 210 to 305 Amp.
Voltage is 11 VDC.