MODULE GP-COOLING 4432100 - Caterpillar

Illustration 195 g01428929
Remove seal ring (319) from clutch piston (318).
Illustration 196 g01428942
Illustration 197 g01428972
Attach Tooling (C) and a suitable lifting device to clutch housing (320). The weight of clutch housing (320) is approximately 50 kg (111 lb). Remove retaining ring (321). Remove clutch housing (320).
Illustration 198 g01428990
Remove seal ring (322) from clutch housing (320).
Illustration 199 g01429023
Remove bearing (323) from clutch housing (320).
Illustration 200 g01429028
Remove bolts (325) from ring carrier assembly (324).
Illustration 201 g01429117
Install bolts (325) into the locations for the pusher bolts. Use bolts (325) to help remove ring carrier assembly (324). Remove ring carrier assembly (324).
Illustration 202 g01429123
Remove seal ring (326) and seal rings (327) from ring carrier assembly (324).
Illustration 203 g01429159
Remove bolts (328) from ring carrier (329).
Illustration 204 g01429166
Use Tooling (V) to remove ring carrier (329).
Illustration 205 g01429196
Remove lip seal (330) from ring carrier (329). Remove toric ring (331) from ring carrier (329).
Illustration 206 g01429136
Illustration 207 g01429210
Attach Tooling (U) onto input shaft (332). Attach Tooling (D) and a suitable lifting device to Tooling (U). Use Tooling (U), Tooling (D), and the suitable lifting device to support input shaft (332). The weight of input shaft (332) is approximately 59 kg (130 lb).
Remove O-ring seal (333). Use Tooling (K) to remove retaining ring (334). Use Tooling (D), Tooling (U), and the suitable lifting device to lower input shaft (332) to the ground.
Illustration 208 g01429225
Remove plugs (336) and the O-ring seals from clutch housing (335). Attach Tooling (B) and a suitable lifting device to remove clutch housing (335). The weight of clutch housing (335) is approximately 118 kg (260 lb).
Illustration 209 g01429283
Position input shaft (332) onto suitable cribbing. Attach Tooling (W) to input shaft (332) to remove bearing (337).