MODULE- 5N6880 - Caterpillar

Pull up the suspension damping lever (9), to increase stiffness of the suspension. Push down the lever to decrease stiffness of the suspension. Release the lever to lock the seat. Pull out the crank handle from the operator weight adjustment knob (10). Turn the handle clockwise to increase weight support. Turn the handle counterclockwise to decrease weight support. Push in the handle to lock the seat.Seat Belt
Always check the condition of the seat belt and mounting hardware before operating the machine.Replace the seat belt at least once every three years, regardless of appearance. A date label, to determine the age of the belt, is sewn onto each belt. Inspect for worn or frayed webbing.Check for worn or damaged buckle. Replace the belt and buckle if they are worn or damaged. Inspect the belt mounting hardware. Replace any damaged or worn hardware. Keep the mounting bolts tight.Seat Belt Adjustment
The seat belt is equipped with an automatic locking retractor. This retractor will lock if the belt is pulled or jerked after belt is pulled out of the retractor.The buckle end of the seat belt is equipped with a comfort ride sleeve. This sleeve will allow the operator limited movement with the seat belt fastened.To Fasten the Seat Belt
Pull the seat belt (1) out of the retractor in a continuous motion.Fasten the seat belt catch (2) into buckle (3). Check to be sure seat belt is placed low across lap/mid-section of the operator.The retractor will adjust the belt length and lock in place. The comfort ride sleeve will allow the operator limited movement.To Release the Seat Belt
Push the release button on the buckle to release the seat belt. The seat belt will automatically retract into the retractor.Radio - AM FM Cassette (If Equipped)
ON/OFF Switch, Volume Control, Speaker Balance Control and Display Call Switch (1) - To turn the radio-cassette player ON rotate the ON/OFF knob clockwise. To turn the radio-cassette player OFF rotate the knob counterclockwise completely.To increase the volume of the radio-cassette player, rotate the knob clockwise to the desired volume level. To decrease the volume of the radio-cassette player, rotate the knob counterclockwise to the desired volume level.To adjust the balance between the left and right speakers, pull the knob out and rotate clockwise or counterclockwise to the desired speaker balance.To activate the call display, push the knob in with the radio on. The time to will be displayed for eight seconds and then return to the frequency display.To change the display so that the time is displayed continuously and the frequency for call is display only. With the radio on, push and hold the memory enable switch (10) and push the knob in. Release the knob and memory enable switch and the display will show the time continuously and the frequency will be on the call display only. Manual Station Tuning and Auto Seek Tuning (2) - To manually select a station, turn the knob clockwise for stations with higher frequencies or counterclockwise for stations with lower frequencies.