2G6064 MOLDBOARD ASSEM. Caterpillar parts
12G, 140G
Rating:
Alternative (cross code) number:
CA2G6064
2G-6064
2G6064
CA2G6064
2G-6064
2G6064
Weight: 1237 pounds 561 kg.
MOTOR GRADER,
This part in 2 request:
Show.
This information for suppliers only!
2022-02-19
2016-09-29
Number on catalog scheme:
1
For full view, you need register
Information:
Removal Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A 185-3630 Strap Wrench As 1
Personal injury or death may result from failure to adhere to the following procedures.Fuel leaked or spilled onto hot surfaces or electrical components can cause a fire.Clean up all leaked or spilled fuel. Do not smoke while working on the fuel system.Turn the disconnect switch OFF or disconnect the battery when changing fuel filters.
Turn the fuel supply to the OFF position.
Turn the battery disconnect switch to the OFF position.
Illustration 1 g06143050
Open drain valve (5) and drain the fuel into a suitable container.
Use Tooling (A) to remove secondary fuel filter (4).
Disconnect hose assemblies (1).
Remove bolts (2) and fuel filter base assembly (3).Installation Procedure
Install secondary fuel filter (4) and fuel filter base assembly (3) in the reverse order of removal.
Tighten bolts (2) to a torque of 44 N m (32 lb ft).
Table 1
Required Tools
Tool Part Number Part Description Qty
A 185-3630 Strap Wrench As 1
Personal injury or death may result from failure to adhere to the following procedures.Fuel leaked or spilled onto hot surfaces or electrical components can cause a fire.Clean up all leaked or spilled fuel. Do not smoke while working on the fuel system.Turn the disconnect switch OFF or disconnect the battery when changing fuel filters.
Turn the fuel supply to the OFF position.
Turn the battery disconnect switch to the OFF position.
Illustration 1 g06143050
Open drain valve (5) and drain the fuel into a suitable container.
Use Tooling (A) to remove secondary fuel filter (4).
Disconnect hose assemblies (1).
Remove bolts (2) and fuel filter base assembly (3).Installation Procedure
Install secondary fuel filter (4) and fuel filter base assembly (3) in the reverse order of removal.
Tighten bolts (2) to a torque of 44 N m (32 lb ft).
Caterpillar parts catalog:
Parts moldboard Caterpillar catalog:
9D9796
MOLDBOARD AS
12G, 140G
12G, 140G
120G, 120H, 120H ES, 120H NA, 12G, 12H, 12H ES, 12H NA, 130G, 135H, 135H NA, 140G, 140H, 140H ES, 140H NA, 143H, 160G
120B, 120G, 120H, 120H ES, 120H NA, 12G, 12H, 12H ES, 12H NA, 130G, 135H, 135H NA, 140G, 140H, 140H ES, 140H NA, 143H
8D4023
MOLDBOARD ASSEM.
12G, 140G
12G, 140G
3D9533
MOLDBOARD
14E
14E
8D4023
MOLDBOARD ASSEM.
12G, 140G
12G, 140G