8W2768 MOLDBOARD AS Caterpillar parts
120B, 120G, 120H, 120H ES, 120H NA, 12G, 12H, 12H ES, 12H NA, 130G, 135H, 135H NA, 140G, 140H, 140H ES, 140H NA, 143H
Rating:
Alternative (cross code) number:
CA8W2768
8W-2768
8W2768
CA8W2768
8W-2768
8W2768
Weight: 1186 pounds 537 kg.
MOTOR GRADER,
Compatible equipment models: 8W2768:
Information:
Removal Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A - Puller (Two Legged) 1
B - E10 Torx Socket
1/4" Square Drive 1 Start By:
Remove the fuel injection pump. Refer to Disassembly and Assembly, "Fuel Injection Pump - Remove" for the correct procedure.
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids.Dispose of all fluids according to local regulations and mandates.
Illustration 1 g01970674
Use a suitable tool in order to prevent fuel injection pump gear (3) from rotating. Note: Do not use timing pin for the fuel injection in order to prevent the fuel injection pump gear from rotating.
Remove nut (1) and washer (2).
Use Tooling (A) in order to remove gear (3) from the shaft of fuel injection pump (7).
Remove key (6) from the shaft of fuel injection pump (7).
Use Tooling (B) in order to remove Torx screws (8) and washers.
Remove adapter plate (4) from fuel injection pump (7).
Remove O-ring seal (5).
Table 1
Required Tools
Tool Part Number Part Description Qty
A - Puller (Two Legged) 1
B - E10 Torx Socket
1/4" Square Drive 1 Start By:
Remove the fuel injection pump. Refer to Disassembly and Assembly, "Fuel Injection Pump - Remove" for the correct procedure.
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids.Dispose of all fluids according to local regulations and mandates.
Illustration 1 g01970674
Use a suitable tool in order to prevent fuel injection pump gear (3) from rotating. Note: Do not use timing pin for the fuel injection in order to prevent the fuel injection pump gear from rotating.
Remove nut (1) and washer (2).
Use Tooling (A) in order to remove gear (3) from the shaft of fuel injection pump (7).
Remove key (6) from the shaft of fuel injection pump (7).
Use Tooling (B) in order to remove Torx screws (8) and washers.
Remove adapter plate (4) from fuel injection pump (7).
Remove O-ring seal (5).
Caterpillar parts catalog:
Parts moldboard Caterpillar catalog:
9D9796
MOLDBOARD AS
12G, 140G
12G, 140G
8W2761
MOLDBOARD AS
120G, 120H, 120H ES, 120H NA, 12G, 12H, 12H ES, 12H NA, 130G, 135H, 135H NA, 140G, 140H, 140H ES, 140H NA, 143H, 160G
120G, 120H, 120H ES, 120H NA, 12G, 12H, 12H ES, 12H NA, 130G, 135H, 135H NA, 140G, 140H, 140H ES, 140H NA, 143H, 160G
8W2767
MOLDBOARD AS
120B, 120H, 12H, 135H, 140G, 140H
120B, 120H, 12H, 135H, 140G, 140H
8W1546
MOLDBOARD
120B, 120G, 12G, 130G
120B, 120G, 12G, 130G
8W2770
MOLDBOARD AS
120G, 130G
120G, 130G
2G6064
MOLDBOARD ASSEM.
12G, 140G
12G, 140G
8D4023
MOLDBOARD ASSEM.
12G, 140G
12G, 140G
8W2761
MOLDBOARD AS
120G, 120H, 120H ES, 120H NA, 12G, 12H, 12H ES, 12H NA, 130G, 135H, 135H NA, 140G, 140H, 140H ES, 140H NA, 143H, 160G
120G, 120H, 120H ES, 120H NA, 12G, 12H, 12H ES, 12H NA, 130G, 135H, 135H NA, 140G, 140H, 140H ES, 140H NA, 143H, 160G
9D9796
MOLDBOARD AS
12G, 140G
12G, 140G
2G6063
MOLDBOARD AS
120G, 12G, 130G
120G, 12G, 130G
8W8089
MOLDBOARD AS
14G, 14H, 14H NA
14G, 14H, 14H NA
8W2770
MOLDBOARD AS
120G, 130G
120G, 130G
8W1546
MOLDBOARD
120B, 120G, 12G, 130G
120B, 120G, 12G, 130G
8W2767
MOLDBOARD AS
120B, 120H, 12H, 135H, 140G, 140H
120B, 120H, 12H, 135H, 140G, 140H