MONITOR GP-PAYLOAD 2208650 - Caterpillar

TARGET="_parent">Oil Filter - Inspect
Radiator Core - Clean
Water Spray Nozzles - Clean
Water Spray System - Drain
Window Washer Reservoir - Fill
Window Wiper - Inspect/Replace
Windows - Clean
Every 10 Service Hours or Daily
Backup Alarm - Test
Cooling System Coolant Level - Check
Engine Oil Level - Check
Hydraulic System Oil Level - Check
Indicators and Gauges - Test
Seat Belt - Inspect
Water Spray System Filter - Clean
Water Tank Strainer - Clean and Inspect
Every 50 Service Hours
Ring Bearings - Lubricate
Sidecutter - Lubricate
Every 100 Service Hours
Eccentric Weight Housing Oil Level - Check
Final Drive Planetary Oil Level - Check
Fuel System Water Separator - Drain
Fuel Tank Water and Sediment - Drain
Initial 250 Service Hours
Final Drive Planetary Oil - Change
Every 250 Service Hours
Belts - Inspect/Adjust/Replace
Drum Isolation Mounts - Inspect/Replace
Engine Oil Sample - Obtain
Offset Cylinder Ends - Lubricate
Steering Cylinder Ends - Lubricate
Initial 500 Hours (for New Systems, Refilled Systems, and Converted Systems)
Cooling System Coolant Sample (Level 2) - Obtain
Every 500 Service Hours
Braking System - Test
Cooling System Coolant Sample (Level 1) - Obtain
Engine Oil and Filter - Change
Final Drive Planetary Oil - Change
Fuel System Primary Filter (Water Separator) - Replace
Fuel System Secondary Filter - Replace
Fuel System Third Filter - Replace
Hydraulic System Oil Sample - Obtain
Oscillation Drive Belts - Inspect
Every 1000 Service Hours
Battery - Clean/Check
Cooling System Pressure Cap - Clean/Replace
Engine Mounts - Inspect
Engine Valve Lash - Check
Hydraulic System Oil Filter - Replace
Pivot Bearing (Compaction Measurement Mounting) - Replace
Rollover Protective Structure (ROPS) - Inspect
Every 2000 Service Hours
Cooling System Coolant Sample (Level 2) - Obtain
Eccentric Weight Housing Oil (Oscillation) - Change
Fuel Tank Cap Filter - Replace
Hydraulic Tank Vent - Replace
Oscillation Drive Belts - Replace
Every 3000 Service Hours
Cooling System Water Temperature Regulator - Replace
Eccentric Weight Housing Oil - Change
Eccentric Weight Housing Oil (Split Drum) - Change
Hydraulic System Oil - Change
Every 3 Years After Date of Installation or Every 5 Years After Date of Manufacture
Seat Belt - Replace
Every 6000 Service Hours or 3 Years
Cooling System Coolant Extender (ELC) - Add
Every 12 000 Service Hours or 6 Years
Cooling System Coolant (ELC) - Change