MONITOR GP- 2905439 - Caterpillar

Removal Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A 463-3380 Lift As 1 Start By:
Connect the steering frame lock.
Illustration 1 g06228518
Position Tooling (A) under transmission guard (1). The weight of transmission guard (1) is approximately 45 kg (100 lb).
Remove bolts (2) and use Tooling (A) to lower transmission guard (1) to the ground.Note: Transmission guard (1) is hinged at the rear. If necessary, use two people to remove transmission guard (1).
Illustration 2 g01262650
Use two people to remove guard (4). The weight of guard (4) is approximately 23 kg (50 lb). Remove bolts (3) and guard (4).Installation Procedure
Table 2
Required Tools
Tool Part Number Part Description Qty
A 463-3380 Lift As 1
Illustration 3 g01262650
Use two people to position guard (4). The weight of guard (4) is approximately 23 kg (50 lb). Install bolts (3).
Illustration 4 g06228518
Use Tooling (A) to raise transmission guard (1) into position. The weight of transmission guard (1) is approximately 45 kg (100 lb).
Install bolts (2).Note: Transmission guard (1) is hinged at the rear. If necessary, use two people to install transmission guard (1) and bolts (2).End By:
Disconnect the steering frame lock.