MONITOR AR-PAYLOAD 4469242 - Caterpillar

Typical Illustration(1) Clamp. Six used. Put 5P3931 Anti-Seize Compound on the threads of all clamp studs and tighten the clamp nuts to a torque of ... 8.0 0.5 N m (72 4 lb in)(2) Tube Assembly.Before assembly coat the entire outside exposed surface of the tube end of tube assemblies (2) and (3) with 6V4876 Molykote Paste Lubricant.(3) Tube assembly.(4) Bolts that hold support plates. Put 4C5593 Anti-Seize Compound on the threads of the bolts and tighten these bolts after the 3/4 inch cylinder head bolts are given final torque.103-3715
(1) Clamp. Two used. Tighten the clamp nuts to a torque of ... 14 3 N m (135 27 lb in)(2) Clamp. Four used. Tighten the clamp nuts to a torque of ... 7.5 1.0 N m (66.37 8.85 lb in)4W7649
(1) Tighten clamp until spring is fully compressed, then back the nut off 1.5 turns.(2) Plugs. Apply 5P3931 Anti-Seize Compound to the four plugs.(3) Tighten clamps to a torque of ... 7.5 1.0 N m (5.51 .74 lb ft)(4) Tighten bolt to a torque of ... 55 7 N m (40 5 lb ft)1N3213, 7E0605
Typical Illustration
7E0605 Air Lines Group Shown.(1) Apply 9S3263 Thread Lock to the studs. Tighten studs in adapters to a torque of ... 30 5 N m (22 4 lb ft)(2) Tighten Indicator to a torque of ... 2.0 0.7 N m (17.70 6.19 lb in) Apply 5P3931 Anti-Seize Compound to the bolts on 1N3213 Air Lines Group.