MOTOR GP-WINDOW WIPER 1010744 - Caterpillar

Removal Procedure
Table 1
Required Tools    
Tool     Part Number     Part Description     Qty    
A     352-5891     Lifting Strap     2    
B         Loctite 771     -    
Hot engine components can cause injury from burns. Before performing maintenance on the engine, allow the engine and the components to cool.
Wear goggles, gloves, protective clothing, and a National Institute for Occupational Safety and Health (NIOSH) approved P95 or N95 half-face respirator when handling a used Diesel Particulate Filter or Catalytic Converter Muffler. Failure to do so could result in personal injury.
Illustration 1 g02198653
Note: Keep the soot antenna and harness assembly connections clean from contaminants. To prevent contaminants from entering the connections, always plug or cap the connections as they are disconnected.
Disconnect cable assembly (2) and remove soot antenna (1) .
Illustration 2 g02199118
Loosen clamp assembly (4) and slide the clamp assembly away from catalyst (7) .
Disconnect temperature sensor (5) and pressure sensor (6) .
Position Tooling (A) around catalyst (7) . Disconnect clamp assemblies (8) and (3) , and remove the catalyst. The weight of the catalyst is approximately 21 kg (46 lb).
Discard clamp assembly (4) .