1060080 MOTOR AS Caterpillar parts
315
Rating:
Alternative (cross code) number:
CA1060080
106-0080
1060080
CA1060080
106-0080
1060080
Weight: 5 pounds 2 kg.
EXCAVATOR,
Compare Prices: .
As an associate, we earn commssions on qualifying purchases through the links below
BRExhaust Replacement Exhaust System Kit 106-0080: Compatible with 2003-2011 Honda Element 2.4L
BRExhaust Complete mandrel-bent replacement of all parts from behind or near the last catalytic converter, offering long-lasting, high corrosion resistance and durability || Bolt-on, multi-piece design for smooth and easy DIY installation around obstructions, ensuring quality fitment and function without requiring fabrication || All components, gaskets, clamps, and hardware required, along with installation instructions, are packaged together in a single protective box || Leaves all emissions equipment intact, maintaining emissions compliance || Two year, unlimited mileage warranty
BRExhaust Complete mandrel-bent replacement of all parts from behind or near the last catalytic converter, offering long-lasting, high corrosion resistance and durability || Bolt-on, multi-piece design for smooth and easy DIY installation around obstructions, ensuring quality fitment and function without requiring fabrication || All components, gaskets, clamps, and hardware required, along with installation instructions, are packaged together in a single protective box || Leaves all emissions equipment intact, maintaining emissions compliance || Two year, unlimited mileage warranty
BRExhaust Replacement Exhaust System Kit 106-0080: Compatible with 2003-2011 Honda Element 2.4L
BRExhaust Complete mandrel-bent replacement of all parts from behind or near the last catalytic converter, offering long-lasting, high corrosion resistance and durability || Bolt-on, multi-piece design for smooth and easy DIY installation around obstructions, ensuring quality fitment and function without requiring fabrication || All components, gaskets, clamps, and hardware required, along with installation instructions, are packaged together in a single protective box || Leaves all emissions equipment intact, maintaining emissions compliance || Two year, unlimited mileage warranty
BRExhaust Complete mandrel-bent replacement of all parts from behind or near the last catalytic converter, offering long-lasting, high corrosion resistance and durability || Bolt-on, multi-piece design for smooth and easy DIY installation around obstructions, ensuring quality fitment and function without requiring fabrication || All components, gaskets, clamps, and hardware required, along with installation instructions, are packaged together in a single protective box || Leaves all emissions equipment intact, maintaining emissions compliance || Two year, unlimited mileage warranty
Number on catalog scheme:
11
For full view, you need register
Compatible equipment models: 1060080:
Information:
Assembly Procedure
Personal injury can result from being struck by parts propelled by a released spring force.Make sure to wear all necessary protective equipment.Follow the recommended procedure and use all recommended tooling to release the spring force.
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Ensure that all components are clean and free from wear or damage. Refer to Specifications, "Rocker Shaft" for more information. If necessary, replace any components that are worn or damaged.
Illustration 1 g01317298
Typical example
Lubricate adjustment screw (1) with clean engine oil. Install adjustment screw (1) and nut (2) to rocker arm (3). Repeat the process for the remaining rocker arms.
Install a new O-ring seal (7) onto rocker shaft (6). Lubricate the rocker shaft with clean engine oil.
Position the end of rocker shaft (6) into the bore in base (8). Align recesses (X) on the rocker shaft with holes (Y) in the base.
Gradually insert rocker shaft (6) into the base (8). Install rocker arm (3).
Continue to insert rocker shaft (6) and install the following components to the rocker shaft:
Rocker arm (3)
Washer (5)
Spring (4)
Washer (5)
Rocker arm (3)
Repeat Steps 5 and 6 in order to install the remaining components.
Ensure that rocker shaft (6) is fully engaged into base (8). Check that recesses (X) on the rocker shaft are aligned with holes (Y) in the base. End By:
Install the rocker shaft and the pushrods. Refer to Disassembly and Assembly, "Rocker Shaft and Pushrod - Install".
Personal injury can result from being struck by parts propelled by a released spring force.Make sure to wear all necessary protective equipment.Follow the recommended procedure and use all recommended tooling to release the spring force.
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Ensure that all components are clean and free from wear or damage. Refer to Specifications, "Rocker Shaft" for more information. If necessary, replace any components that are worn or damaged.
Illustration 1 g01317298
Typical example
Lubricate adjustment screw (1) with clean engine oil. Install adjustment screw (1) and nut (2) to rocker arm (3). Repeat the process for the remaining rocker arms.
Install a new O-ring seal (7) onto rocker shaft (6). Lubricate the rocker shaft with clean engine oil.
Position the end of rocker shaft (6) into the bore in base (8). Align recesses (X) on the rocker shaft with holes (Y) in the base.
Gradually insert rocker shaft (6) into the base (8). Install rocker arm (3).
Continue to insert rocker shaft (6) and install the following components to the rocker shaft:
Rocker arm (3)
Washer (5)
Spring (4)
Washer (5)
Rocker arm (3)
Repeat Steps 5 and 6 in order to install the remaining components.
Ensure that rocker shaft (6) is fully engaged into base (8). Check that recesses (X) on the rocker shaft are aligned with holes (Y) in the base. End By:
Install the rocker shaft and the pushrods. Refer to Disassembly and Assembly, "Rocker Shaft and Pushrod - Install".
Caterpillar parts catalog:
Parts motor Caterpillar catalog:
7I8267
MOTOR GP-SWING
311, 312, 315, 317
311, 312, 315, 317
311, 311B, 312, 315, 317, OEMS
4I5019
MOTOR AS-WIPER
311, 312, 315, 320, 320 L, 320N, 322, 325, 325 L, 325 LN, 330, 330 FM L, 330 L
311, 312, 315, 320, 320 L, 320N, 322, 325, 325 L, 325 LN, 330, 330 FM L, 330 L
1225322
MOTOR AS
307, 307B, 311, 312, 315, 320N, 322, 325, 330
307, 307B, 311, 312, 315, 320N, 322, 325, 330
1262944
MOTOR AS
307
307
307, E70, E70B
1327787
MOTOR AS
307
307
307
1859198
MOTOR
307
307
1680776
MOTOR ASSEM.
311B
311B
910E, 953B, 953C, 963B, 973, D5M, D6M, D6R, D7R
315B, 322B L, 325B, 325B L, M325B
1135794
MOTOR
1090, 1190, 1190T, 1290T, 1390, 2290, 2390, 2391, 2491, 2590, 315B FM L, 320B FM LL, 320C FM, 322B L, 322C, 322C FM, 325B L, 325C FM, 330B L, 330C FM, 345C, 511, 521, 521B, 522, 522B, 532, 541, 541 2,...
1090, 1190, 1190T, 1290T, 1390, 2290, 2390, 2391, 2491, 2590, 315B FM L, 320B FM LL, 320C FM, 322B L, 322C, 322C FM, 325B L, 325C FM, 330B L, 330C FM, 345C, 511, 521, 521B, 522, 522B, 532, 541, 541 2,...
307B
1397191
MOTOR AS
307B
307B
307B