MOTOR GP-ELEC -C 10R7583 - Caterpillar

2. Disconnect hose assemblies (1), (3), and (4) from hydraulic oil cooler bypass valve (6).3. Remove three bolts (5), and remove hydraulic oil cooler bypass valve (6) from the mounting plate.4. Remove control valve assembly (2) and the gasket from hydraulic oil cooler bypass valve (6). The following steps are for the installation of the hydraulic oil cooler bypass valve.5. Install the gasket and control valve assembly (2) in hydraulic oil cooler bypass valve (6). Tighten the control valve assembly to a torque of 90 7 N m (65 5 lb ft).6. Position hydraulic oil cooler bypass valve (6) on the mounting plate, and install three bolts (5).7. Connect hose assemblies (1), (3), and (4) to hydraulic oil cooler bypass valve (6).8. Install the floor plate.