MOTOR & MTG GP-TRAVEL 1111887 - Caterpillar

Illustration 1 g00596254
Left side view of engine
Illustration 2 g00471794
View A-A (1) Cylinder block (2) GasketGasket (2) has a bead on one surface. Install the gasket so that the bead is facing side cover (8) . (3) Length of the bolts marked location (Y). ... 20.0 mm (0.79 inch) (4) Length of bolt ... 60 mm (2.36 inch)Length of the ten remaining bolts for the three side covers ... 30.0 mm (1.18 inch) (5) CoverClean the face of the cover with solvent. Apply 1U-8846 Liquid Gasket to the cover. Spread uniformly on the face of the cover and around the bolt holes. The cover must be installed and tightened within ten minutes. (6) Sleeve (7) extends from the face of cylinder block (1). Distance ... 5.0 0.5 mm (0.20 0.02 inch) (7) Six sleeves marked location (X). (8) Side cover
Illustration 3 g00448150
Typical example of side coverTighten bolts (1 through 8) in a numerical sequence.Tighten the bolts to the following torque. ... 28 7 N m (21 5 lb ft)